Product Recognition | |
|---|
Certification Number | ZC14-26060613 |
|---|
Name | aërQ Temperature & Humidity Sensor 8 |
|---|
Short Description | Aeotec aërQ Temperature & Humidity Sensor 8 |
|---|
Description | Aeotec aërQ Temperature & Humidity Sensor measures the three air quality parameters temperature, humidity and dew point and reports them to a central controller. Besides this, the device can directly control groups of other Z-Wave® devices on over- and undershooting a set temperature and/or humidity parameter. This can be used to establish control loops for temperature and humidity.
This product supports Security 2 Command Class. While a Security S2 enabled Controller is needed in order to fully use the security feature. This product can be operated in any Z-Wave network with other Z-Wave/ Z-Wave Plus® certified devices from other manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. This product also supports SmartStart. |
|---|
Brand | Aeotec |
|---|
Brand Owner | Aeotec Limited |
|---|
Identifier | ZWA057-A |
|---|
Product Line | Z-Wave Plus v2 line |
|---|
Product URL | www.aeotec.com |
|---|
OEM Version | HW: 57 FW: 01.00 |
|---|
Hardware Platform | EFR32ZG23A |
|---|
Z-Wave Version | 7.23.2 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Notification Sensor DT |
|---|
Role Type | ROLE_TYPE_END_NODE_ALWAYS_ON, ROLE_TYPE_END_NODE_SLEEPING_REPORTING |
|---|
Manufacturer ID | 0x0371 |
|---|
Product Type ID | 0x0102 |
|---|
Product ID | 0x0039 |
|---|
User Icon | 0x0C10 |
|---|
Installer Icon | 0x0C10 |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
Radio Range Z-Wave LR (m) | 400 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz, US_LR: 912.00MHz, 920.00MHz |
|---|
Categories | Sensors |
|---|
Countries / Regions | Argentina, Bahamas, Barbados, Bermuda, Bolivia, British Virgin Islands, Canada, Cayman Islands, Colombia, Guatemala, Haiti, Honduras, Jamaica, Mexico, Panama, Saint Kitts and Nevis, Suriname, Trinidad and Tobago, Turks and Caicos Islands, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_SENSOR_BINARY_V2 | Binary Sensor V2 | 0x30 | 2 | COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 | COMMAND_CLASS_SENSOR_MULTILEVEL_V11 | Multilevel Sensor V11 | 0x31 | 11 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 |
|
|---|
S2 Classes | S2_AUTHENTICATED, S2_UNAUTHENTICATED |
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Color | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 | 2 | 5 | 0 | Temperature High Trigger | 0x7104 | 3 | 5 | 0 | Temperature Low Trigger | 0x7104 | 4 | 5 | 0 | Humidity High Trigger | 0x7110 | 5 | 5 | 0 | Humidity Low Trigger | 0x7110 | 6 | 5 | 0 | Air Temperature | 0x7104 | 7 | 5 | 0 | Mold danger | 0x7110 | 8 | 5 | 0 | Tamper | 0x7107 |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value |
|---|
1 | Set threshold Check Time | Set threshold Check Time | 1 | 4 | 0 | 0 | 0x00000384 | 2 | Minimum temperature change to report | Trigger temperature report | 1 | 1 | 0 | 0 | 0x24 | 3 | Minimum humidity change to report | Trigger humidity report | 1 | 1 | 0 | 0 | 0x32 | 4 | Enable led indication | Enable led indication | 3 | 1 | 0 | 0 | 0x0F | 17 | Humidity Lower Watermark value | Send BASIC Set to Group 5 if below | 1 | 2 | 0 | 0 | 0x012C | 23 | Low battery threshold | Low battery threshold | 1 | 1 | 0 | 0 | 0x14 | 24 | Periodic Reports | Periodic Reports | 1 | 4 | 0 | 0 | 0x0000A8C0 | 25 | Offset value for Temperature | Calibrate temperature | 0 | 2 | 0 | 0 | 0x0000 | 64 | Temperature & Dew Point Scale | scale for auto reports and setting | 2 | 1 | 0 | 0 | 0x01 |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | Page 4-5 in the Manual | 1 | Classic Inclusion | 1. Turn your main controller/ gateway into adding/ inclusion mode.
2. Click the Action Button on product twice quickly. | 2 | Classic Exclusion | 1. Turn your main controller/ gateway into removing/ exclusion mode.
2. Click the Action Button on product twice quickly. | 4 | Wake-Up Procedure | Click the Action button once. | 5 | Factory Reset Procedure | Press and hold the Action Button for 12 seconds. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Heat Alarm | (Refer to parameters): State idle | Heat Alarm | Heat sensor status: Overheat detected | Heat Alarm | Heat sensor status: Under heat detected | Home Security | (Refer to parameters): State idle | Home Security | Cover status: Tampering, product cover removed | Power Management | (Refer to parameters): State idle | Power Management | Power status: Power has been applied | Power Management | Mains status: AC mains disconnected | Power Management | Mains status: AC mains re-connected | Power Management | Battery maintenance status: Replace battery now | Weather Alarm | (Refer to parameters): State idle | Weather Alarm | Moisture alarm status: Moisture alarm |
|
|---|
Supported Multilevel Sensors | Multilevel Sensor Type |
|---|
Air temperature | Humidity | Dew point |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
