Product Recognition
Certification Number	ZC14-22030082
Name	Aidoo Control Z-Wave™ HVAC unit
Short Description	Device to manage and integrate HVAC units in Z-Wave™ control systems used in U.S./Canada. Externally powered by the indoor unit.
Long Description	Device to manage and integrate HVAC units in Z-Wave™ control systems used in U.S./Canada. Externally powered by the indoor unit. Features: • HVAC manufacturers' Certified communication protocols. • 2-way communication with the HVAC equipment. • Control of the main parameters of the unit (Status, Operation mode, Fan speed, Set point). • Device powered by the indoor unit. • Modbus port for hard-wire integration.
Brand	AIRZONE
Product Identifier	AZAI6ZWUxxx
Product Line	Aidoo
OEM Version	HW: 01 FW: 10.19
Hardware Platform	ZGM130S037HGN2 / ZGM130S037HGN1
Z-Wave Version	7.16.1
Library Type	END_NODE_ENHANCED_232
Device Type	Thermostat DT
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x044E
Product Type ID	0x0004
Product ID	0x0002
User Icon	0x1200
Installer Icon	0x1200
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	Gateway Controller, Thermostats, HVAC, Fan Control
Countries / Regions	Argentina, Bahamas, Barbados, Bermuda, Bolivia, British Virgin Islands, Canada, Cayman Islands, Colombia, Ecuador, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Suriname, Trinidad and Tobago, Turks and Caicos Islands, United States of America
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 Association Group Information (AGI) V3 0x59 3 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 Firmware Update Meta Data V5 0x7A 5 COMMAND_CLASS_INDICATOR_V3 Indicator V3 0x87 3 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 Multi Channel Association V3 0x8E 3 COMMAND_CLASS_VERSION_V3 Version V3 0x86 3 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_SECURITY_2 Security 2 0x9F 1 COMMAND_CLASS_SUPERVISION Supervision 0x6C 1 COMMAND_CLASS_TRANSPORT_SERVICE_V2 Transport Service V2 0x55 2 COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_THERMOSTAT_MODE_V3 Thermostat Mode V3 0x40 3 COMMAND_CLASS_THERMOSTAT_SETPOINT Thermostat Setpoint 0x43 1 COMMAND_CLASS_BASIC_V2 Basic V2 0x20 2 COMMAND_CLASS_SENSOR_MULTILEVEL Multilevel Sensor 0x31 1 COMMAND_CLASS_THERMOSTAT_FAN_MODE_V2 Thermostat Fan Mode V2 0x44 2 COMMAND_CLASS_NOTIFICATION_V8 Notification V8 0x71 8 COMMAND_CLASS_SECURITY Security 0 0x98 1
S2 Classes	S2_AUTHENTICATED, S2_UNAUTHENTICATED
Documents	Category Description File Manual_English This file replace the previous one. MI_AZAI6ZWX_MUL_2.pdf
Features	Feature Values Color Value White Communications Connections Value Manufacturer Proprietary Communications Protocol Value Manufacturer Proprietary Protocol Firmware Updatable Value Updatable by Manufacturer IP (Ingress Protection) Rated Value 1 Thermostat HVAC Systems Supported Value Heat Pump Thermostat Modes Value Heat Cool Auto Fan Only Dry Air Thermostat Power Source Value External Transformer
Association Groups	Group Number Maximum Nodes Supported End Point ID Group Name Profile 1 1 0 Lifeline 0x0001
Texts	ID Description Value 8 Where to find S2 DSK on product The SmartStart QR and the full DSK string code can be found on the front side of the Aidoo Z-Wave Plus. The PIN is the first group of 5 underlined digits of the DSK identified as DSK in the left side of the sticker. If you plan to use the DSK, it is important that you take a picture of the label and keep it in a safe place. 1 Classic Inclusion The Aidoo Z-Wave Plus is compatible with all Z-Wave/Z-Wave Plus certified controllers. The device supports both the Network Smartstart inclusion mechanism (which offers the ability to be included in a network, even if the device is not directly connected to the controller) and Standard Inclusion. By default, the inclusion procedure starts in Normal Inclusion mode and after a short timeout the procedure continues in Network Wide Inclusion mode that lasts for about 20 Seconds. If the Aidoo Z-Wave Plus has not been included yet into the Z-Wave network, the Wi-Fi sign LED will remain off. The procedure of inclusion is activated by pressing the Association Button (5) . As soon as the inclusion procedure initiates, the communication LED remains steady red until the device is included in the network. 2 Classic Exclusion Only a controller can remove the device from the network. After activating the exclusion function by the controller, the device can be removed by setting it in Learning Mode. If the Aidoo Z-Wave Plus is already included into the Z-Wave network, the Wi-Fi sign LED will remain steady blue. The procedure of exclusion is activated by pressing the Association Button (5). As soon as the exclusion procedure initiates, the communication LED remains steady red until the device is excluded of the network. 5 Factory Reset Procedure Please use this procedure only when the network primary controller is missing or ortherwise inoperable. The Aidoo Z-Wave Plus can be reset to the original factory settings by long pressing over the Factoy Reset button (6) until all of the front side LEDs light up for a second. Note: If the reset is performed while the device is still part of a network, it notifies the other devices in the lifeline group that it has been removed. 6 Other Special Features The Aidoo Z-Wave Plus supports over-the-air firmware updates that do not require the device to be removed from its location. The firmware update can be activated from all certified controllers supporting version 5 of the Firmware Update function.
Supported Notification Types	Notification Type Event / State System HW status: System hardware failure (manufacturer proprietary failure code provided)
Supported Multilevel Sensors	Multilevel Sensor Type Air temperature
Supports NWI	Yes
Supports Explorer Frames	Yes
Supports SmartStart	Yes