Product Recognition
Certification Number	ZC10-16115304
Name	DCH-Z122 mydlink™ Motion Sensor
Short Description	The PIR sensor DCH-Z122 has PIR sensor function.
Long Description	The PIR sensor DCH-Z122 has PIR sensor function,based on Z-Wave™ technology.
Brand	D-Link Corporation
Product Identifier	DCH-Z122
OEM Version	HW: 1 FW: 1.27:01.21
Hardware Platform	SD3502
Z-Wave Version	6.51.09
Library Type	SLAVE_ROUTING
Device Type	Notification Sensor
Role Type	ROLE_TYPE_SLAVE_SLEEPING_REPORTING
Manufacturer ID	0x0108
Product Type ID	0x0002
Product ID	0x0035
User Icon	0x0C07
Installer Icon	0x0C07
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	Sensors
Countries / Regions	European Union
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_BATTERY Battery 0x80 1 COMMAND_CLASS_CONFIGURATION Configuration 0x70 1 COMMAND_CLASS_SECURITY Security S0 0x98 1 COMMAND_CLASS_SENSOR_BINARY_V2 Sensor Binary V2 0x30 2 COMMAND_CLASS_VERSION_V2 Version V2 0x86 2 COMMAND_CLASS_WAKE_UP_V2 Wake Up V2 0x84 2 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO Association Group Info 0x59 1 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2 COMMAND_CLASS_NOTIFICATION_V4 Notification V4 0x71 4 COMMAND_CLASS_MULTI_CMD Multi-Command 0x8F 1
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_BASIC Basic 0x20 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual Z122_manual.pdf
Features	Feature Values Battery Quantity Value 1 Battery Type Value CR123A Color Value White Sensors Value Motion/No Motion (Binary)
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 8 0 Z-Wave Plus Lifeline 2 8 0 light control
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 9 Turn Off Light Time After turn on the light,setting the delay time to turn off the lighting when the PIR motion to turn off the lighting when the PIR motion is not detected.8 seconds per tick,default tick is 4(32 seconds). 0 means never send turn off light command. 0 1 0 0 4 From To Description 0 127 Delay time to turn off the lighting when the PIR motion is not detected. 2 Basic Set Level Setting the BASIC command value to turn on the light. -1(0xFF) means turn on the light. For dimmer equipment 1 to 100 means the light strength. 0 means turn off the light. Caution: The range is from 0x00 to 0xFF using hexadecimal notation. 0 1 0 0 -1 From To Description -128 127 Basic command value to turn on the light. 3 PIR Sensitivity PIR sensitivity setting. 0 means disable the PIR motion. 1 means the lowest sensitivity. 99 means the highest sensitivity. High sensitivity means can detected long distance,but if there is more noise signal in the environment, it will re-trigger too frequency. 0 1 0 0 80 From To Description 0 99 PIR sensitivity setting. 8 PIR Re-Detect Interval Time In the normal mode, after the PIR motion detected, setting the re-detect time. 8 seconds per tick,default tick is 3(24 seconds). Setting the suitable value to prevent received the trigger signal too frequently. Also can save the battery energy. 0 1 0 0 3 From To Description 1 127 Re-detect time
Texts	ID Description Value 1 Inclusion There is a button on DCH-Z122. 1. Have Z-Wave™ Controller entered inclusion mode. 2. Pressing button once to enter the inclusion mode. 3. After add successful, the device will wake to receive the setting command from Z-Wave™ Controller about 20 seconds. 2 Exclusion There is a button on DCH-Z122. 1. Have Z-Wave™ Controller entered exclusion mode. 2. Pressing button once to enter the exclusion mode. 4 Device Wake-Up There is a button on DCH-Z122. Press the button once, the device will awake 10 seconds. 5 Factory Reset There is a button on DCH-Z122. 1. Pressing button for about 5 seconds. 2. IDs are excluded and all settings will reset to factory default. Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.
Supported Multilevel Sensors	Multilevel Sensor Type 0x02
Supports NWI	Yes
Supports Explorer Frames	Yes