Decora Smart Z-Wave™ 800 Series Dimmer – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC14-23070302

Name

Decora Smart Z-Wave™ 800 Series Dimmer

Short Description

Leviton's Decora Smart Z-Wave™ 800 Series Dimmer offers the latest in Z-Wave™ technology with on/off and dim/bright control of incandescent, LED/CFL, and MLV lighting.

Long Description

The Leviton Decora Smart Z-Wave™ 800 Series Dimmer is designed for use with modern Z-Wave™ hubs and makes it easier than ever to control your lights how you want. The Dimmer is compatible with any Z-Wave enabled network, regardless of the manufacturer, and can also be used with other devices displaying the Z-Wave logo. As well, this device can act as a repeater to increase the reliability of the Z-Wave network. The Decora Smart Z-Wave 800 Series Dimmer looks right at home with your other Decora® in-wall devices and features intuitive on/off and dim/bright control. Add the Dimmer to your Z-Wave hub of choice to enable app commands, scheduling, and voice control of connected lighting.

Brand

Leviton

Product Identifier

ZW6HD

Product Line

Decora Smart Z-Wave™

OEM Version

HW: 01 FW: 01.00:02.01

Hardware Platform

ZGM230SA

Z-Wave Version

7.18.3

Library Type

END_NODE_ENHANCED_232

Device Type

Multilevel Switch DT

Role Type

ROLE_TYPE_END_NODE_ALWAYS_ON

Manufacturer ID

0x001D

Product Type ID

0x0041

Product ID

0x0002

User Icon

0x0600

Installer Icon

0x1C01

Frequency Plans

US: 916.00MHz, 908.40MHz

Categories

All Lighting Devices, On/Off Switches/Devices, Dimming Lighting Devices, Lighting Accessories

Countries / Regions

Canada, Mexico, United States of America

Supported Command Classes

S2 Classes

S2_AUTHENTICATED, S2_UNAUTHENTICATED

Documents

Features

Association Groups

Configuration Parameters

Texts

ID	Description	Value
8	Where to find S2 DSK on product	SmartStart enabled devices can be added to a Z-Wave network by scanning the Z-Wave QR code on the top of the device, on the strap, or on the back of the unit box with a compatible Z-Wave controller that supports SmartStart inclusion. The device should be added automatically within 10 minutes of being switched on and in the network vicinity. The QR code label with DSK is located on the top of the device. If required, the PIN code is underlined on the label. The PIN code is also located on the front strap.
1	Classic Inclusion	For older controllers, Classic Inclusion is supported. Depending on the age of the controller it may need to be 3 to 35 feet from the device when including. 1. Enter setup mode (see page 10). 2. Follow the Z-Wave controller instructions to enter inclusion mode. 3. Tap the top rocker 1 time, the Status LED will quickly flash GREEN. 4. The Z-Wave controller will confirm successful inclusion to the Z-Wave network.
2	Classic Exclusion	The Exclusion command found in the Z-Wave controller is used as a best practice for removing devices from a Z-Wave network. 1. Enter setup mode (see page 10). 2. Follow the Z-Wave controller instructions to enter exclusion mode. 3. Tap the top rocker 1 time, the Status LED will quickly flash GREEN. 4. The Z-Wave controller will confirm successful exclusion from the Z-Wave network.
5	Factory Reset Procedure	When removing a Z-Wave device from the network, it is best practice to use the exclusion process. In situations where a device needs to be returned to factory default settings, follow the steps below. Please use this procedure only when the network primary controller is missing or otherwise inoperable. 1. Hold the top rocker for 14 seconds: After the first 7 seconds, the Status LED will turn AMBER. Continue holding until the Status LED flashes RED/AMBER then release. 2. The device will reset.
6	Other Special Features	Fade On Time (Dimmer only) 1. Enter Setup Mode 2. Tap the Top Rocker 6 times. The Status LED will quickly flash green/red 3. Tap the Top Rocker 1 time. The Status LED will quickly flash amber/red 4. Use the Dim/Bright Bar to adjust the Fade On time based on the below chart. 5. Hold the top of the rocker to exit. The Status LED will quickly flash amber to confirm. Fade Off Time (Dimmer only) 1. Enter Setup Mode 2. Tap the Top Rocker 6 times. The Status LED will quickly flash green/red 3. Tap the Top Rocker 2 times. The Status LED will quickly flash red 4. Use the Dim/Bright Bar to adjust the Fade off time based on the below chart. 5. Hold the top of the rocker to exit. The Status LED will quickly flash amber to confirm. Minimum Dim Light Level (Dimmer only) 1. Enter Setup Mode 2. Tap the Top Rocker 5 times. The Status LED will quickly flash red/amber 3. Tap the Top Rocker 1 time. The Status LED will quickly flash amber 4. Use the Dim/Bright Bar to adjust the minimum dim level 5. Hold the top of the rocker to exit. The Status LED will quickly flash amber to confirm Maximum Brightness Light Level (Dimmer only) 1. Enter Setup Mode 2. Tap the Top Rocker 5 times. The Status LED will quickly flash red/amber 3. Tap the Top Rocker 2 times. The Status LED will quickly flash red 4. Use the Dim/Bright Bar to adjust the maximum dim level 5. Hold the top of the rocker to exit. The Status LED will quickly flash amber to confirm Preset Light Level vs Return to Last Level (Dimmer only) 1. Enter Setup Mode 2. Tap the Top Rocker 7 times. The Status LED will quickly flash red/amber 3. Use the dim/bright bar to adjust the desired preset light level 4. To set the dimmer to "Return to Last Level", set the dim/bright level to 0% or OFF 5. Hold the top of the rocker to exit. The Status LED will quickly flash amber to confirm LED Dim / Bright Bar Behavior (Dimmer only) 1. Enter Setup Mode 2. Tap the Top Rocker 8 times. The Status LED will quickly flash red 3. Use the Dim/Bright Bar to adjust the amount of time the dim/bright bar LEDs are lit after the dim/bright bar is pressed based on the below chart. 4. Hold the top of the rocker to exit. The Status LED will quickly flash amber to confirm Status LED Configuration Status LED ON when load is ON 1. Enter Setup Mode 2. Tap the Top Rocker 4 times. The Status LED will quickly flash green/amber 3. Tap the Top Rocker 1 time. The Status LED will flash green 4 times to confirm the selection Status LED ON when load is OFF (Default) 1. Enter Setup Mode 2. Tap the Top Rocker 4 times. The Status LED will quickly flash green/amber 3. Tap the Tap Rocker 2 times. The Status LED will flash amber 4 times to confirm the selection Status LED Off 1. Enter Setup Mode 2. Tap the Top Rocker 4 times. The Status LED will quickly flash green/amber 3. Tap the Tap Rocker 3 times. The Status LED will flash red 4 times to confirm the selection Bulb Type (Dimmer only) Incandescent 1. Enter Setup Mode 2. Tap the Top Rocker 4 times. The Status LED will quickly flash green/amber 3. Tap the Tap Rocker 4 times. The Status LED will flash green/amber 4 times to confirm the selection LED (Default) 1. Enter Setup Mode 2. Tap the Top Rocker 4 times. The Status LED will quickly flash green/amber 3. Tap the Top Rocker 5 times. The Status LED will flash green/red 4 times to confirm the selection CFL 1. Enter Setup Mode 2. Tap the Top Rocker 4 times. The Status LED will quickly flash green/amber 3. Tap the Tap Rocker 6 times. The Status LED will flash red/amber 4 times to confirm the selection MLV 1. Enter Setup Mode 2. Tap the Top Rocker 4 times. The Status LED will quickly flash green/amber 3. Tap the Tap Rocker 7 times. The Status LED will flash red/green 4 times to confirm the selection

Supports NWI

Yes

Supports Explorer Frames

Yes

Supports SmartStart

Yes

Radio Range Z-Wave (m)