Product Recognition | |
|---|
Certification Number | ZC10-15060015 |
|---|
Name | Door Lock |
|---|
Short Description | Connected Door Lock |
|---|
Long Description | Touch Screen Type Push Pull Door Lock.
The Samsung SDS Z-Wave Door Lock is a security enabled Z-Wave Plus product that is able to use encrypted Z-Wave Plus messages to communicate to other security enable Z-Wave Plus products. |
|---|
Brand | SAMSUNG SDS |
|---|
Product Identifier | SHP-DP710 |
|---|
OEM Version | 01 |
|---|
Hardware Platform | ZM5101 |
|---|
Z-Wave Version | 6.51.06 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | Door Lock Keypad |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_LISTENING |
|---|
Manufacturer ID | 0x022E |
|---|
Product Type ID | 0x0001 |
|---|
Product ID | 0x0001 |
|---|
Frequency Plans | KR: 920.90MHz, 921.70MHz, 923.10MHz |
|---|
Categories | Locks |
|---|
Countries / Regions | Republic of Korea |
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 5 | 0 | - The lock supports 1 association group with 5 devices.
- Notification Reports are sent out unsolicated to devices included in the association group.
- Refer to Notification Table. |
|
|---|
Texts | ID | Description | Value |
|---|
1 | Inclusion | ① Click [Add] icon in Z-Wave PC Conroller Program.
② Press the [REG] button for 3 seconds. (Ding dong -> Ding ding)
③ Press the [*] button after pressing the [00] button. (Ding dong dang) | 2 | Exclusion | After exclusion from Z-Wave Network, it will no longer be remotely-controlled via the controller.
① Click [Remove] icon in Z-Wave PC Controller Program.
② Press the [REG] button for 3 seconds. (Ding dong -> Ding ding) | 5 | Factory Reset | All registered Master/User data will be deleted, and Master PIN Code is set to ‘1234’. Also Z-Wave Door Lock is being removed from a network.
Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
① Press the [REG] button for 3 seconds. (Ding dong -> Ding ding)
② Press the [*] button after pressing the [4560852580] button. (Ding dong dang)
③ Press the [*] button after pressing the [00] button. (Ding dong dang) | 4 | Device Wake-Up | Door lock always is "" wake up status."" |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Is Flirs | Yes |
|---|
