Product Recognition
Certification Number	ZC10-15100003
Name	Door/window sensor
Short Description	Door/window sensor
Long Description	This magnet sensor contains the latest Z-Wave technology with the ability to remotely control other Z-Wave units available in your network. The fact that it is battery operated and so small you can virtually place it anywhere you want – on doors, windows or drawers, without the need of wiring. Screw or tape up the holder and then click the sensor in place. Done! The sensor is designed to be seen as little as possible and we have made it significantly smaller than other sensors. It consists of two parts that will merge into a stylish unit when the sensor is closed.
Brand	Telldus
Product Identifier	TZDW-100
OEM Version	01
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ENHANCED_232
Device Type	Notification Sensor
Role Type	ROLE_TYPE_SLAVE_SLEEPING_REPORTING
Manufacturer ID	0x0176
Product Type ID	0x0005
Product ID	0x0001
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	Sensors
Countries / Regions	European Union
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL Switch Multilevel 0x26 1 COMMAND_CLASS_SWITCH_ALL Switch All 0x27 1 COMMAND_CLASS_SWITCH_BINARY Switch Binary 0x25 1 COMMAND_CLASS_BASIC Basic 0x20 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual Quickguide_Sensor_Switch_107x153mm_PMS.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 1 0 Z-Wave Plus Lifeline 2 10 0 Sensor status The sensor will send control commands to nodes in this group when the status of the sensor changes. 3 10 0 Sensor status The sensor will send control commands to nodes in this group when the sensor is opened only.
Configuration Parameters	Parameter Number Name Format Size Min Value Max Value Default Value Parameter Values Description 5 Select value that should be sent to association group 3 0 1 0 0 -1 Warning: Undefined variable $field_object in /nas/content/live/zwaprodcatalog/wp-content/themes/hello-elementor-child/single-z-wave-product.php on line 98 From To Description 0 99 Dim-level -1 -1 Last value 6 Type of signals to association group 2 0 1 0 0 0 From To Description 0 0 Normal 1 1 Inverted When this configuration is set to inverted, an off-signal will be sent when the sensor is opened and on-signal when it's closed instead of the opposite. 7 LED-Indicator 0 1 0 0 1 From To Description 1 1 ON 0 0 OFF Select if the LED indicator shold be active or not. Turn it off to reduce the power consumption. 8 Type of command to be sent in the Lifeline 0 1 0 0 0 From To Description 1 1 Sensor binary 0 0 Notification 4 Select what type of command to be sent to nodes in association group 3 0 1 0 0 0 From To Description 0 0 Basic 1 1 Switch Binary 2 2 Switch All 3 3 Switch Multilevel Use Basic to control ON/OFF-devices, use Switch Multilevek to control dimmer-devices. 1 Select what type of command to be sent to nodes in association group 2 0 1 0 0 0 From To Description 0 0 Basic 1 1 Switch Binary 2 2 Switch All 3 3 Switch Multilevel Select what type of command to be sent to nodes in association group 2 2 Select value that should be sent to association group 2 0 1 0 0 -1 From To Description 0 99 Dim-level -1 -1 Last value Select what value that should be sent to association group 2 when Swith Multilevel is set in configuration 1. Use 1-99 for specific dim-level, -1 return to last value. Should only be changed when Swith Multilevel is set in configuration 1. 3 Type of signals to association group 2 0 1 0 0 0 From To Description 0 0 Normal 1 1 Inverted When this configuration is set to inverted, an off-signal will be sent when the sensor is opened and on-signal when it's closed instead of the opposite.
Texts	ID Description Value 5 Factory Reset Press and hold the button until the LED starts flashing (approx. 6 seconds). Press the button once more, short. The device will now reset to factory defaults. The LED will now flash, indicating that it’s no longer added in any Z-Wave network. Please note! Only use the reset procedure when the primary controller is missing or inoperable. 4 Device Wake-Up Press the button on the sensor one time short to wake up the device. 1 Inclusion Automatically add device to network When a battery is inserted, the device is in automatical add mode for one minute (Network Wide Inclusion, NWI). This means that the device is added automatically when the Z-Wave controller enters add mode. Manual add device to network Start the add mode on the Z-Wave controller. Press the button on the device three times fast. The device will now be added into the Z-Wave-network. 2 Exclusion Start the exclusion mode on the Z-Wave controller. Press the button on the device three times fast. The device will now be removed from the Z-Wave-network.
Supports NWI	Yes
Supports Explorer Frames	Yes