10 | Time Delay of "On" command frame | On command is sent after a delay defined in this parameter. | 2 | 2 | 0 | 32400 | 0 | From | To | Description |
|---|
0 | 32400 | seconds |
|
4 | Visual LED Indications | This parameter defines when the red LED will indicate events. Disabling all indications may extend battery life. | 4 | 1 | 0 | 7 | 7 | From | To | Description |
|---|
0 | 0 | LED indication Off | 1 | 0 | Open/Close Status Change | 2 | 0 | Wake Up | 3 | 0 | Open/Close Status Change + Wake Up (1+2 summarized) | 4 | 0 | Device Tampering | 5 | 0 | Open/Close Status Change + Device Tampering (1 + 5 summarized) | 6 | 0 | Wake Up + Device Tampering (2 + 4 summarized) | 7 | 0 | All LED indications on (values 1 + 2 + 4 summarized) |
|
5 | Range Test after double click | Allows to enable the activation of a Z-Wave range test with double clicking the tamper switch. | 3 | 1 | 0 | 1 | 0 | From | To | Description |
|---|
0 | 0 | Disabled | 1 | 0 | Enabled |
|
6 | 2nd Association Group Trigger | This parameter defines the status of the magnet switch that causes sending a BASIC command to all devices of Association Group 2. | 3 | 1 | 0 | 2 | 0 | From | To | Description |
|---|
0 | 0 | Switch after Open and Close | 1 | 0 | Switch after Open | 2 | 0 | Switch after Close |
|
7 | Command Sent to Devices of Association Group 2 | This parameter defines which commands is sent to 2nd Association Group | 3 | 1 | 0 | 2 | 2 | From | To | Description |
|---|
0 | 0 | On | 1 | 0 | Off | 2 | 0 | On and Off |
|
8 | BASIC command "On event" value | This is the BASIC command value sent in case of "On" event. | 2 | 1 | 0 | 255 | 255 | From | To | Description |
|---|
0 | 99 | Value | 255 | 255 | Value |
|
9 | BASIC command "Off event" value | This is the BASIC command value sent in case of "Off" event. | 2 | 1 | 0 | 255 | 0 | From | To | Description |
|---|
0 | 99 | Value | 255 | 255 | Value |
|
2 | Dry Contact Operation Mode | Parameter defines how dry contact will operate with the sensor or switch that is connected to the dry contact terminals. 0 - NO Toggle / Follow state will follow the input of the dry contact terminals where OFF is CLOSED, and ON is OPEN. 1 - NC Toggle / Follow state will follow the input of the dry contact terminals where ON is CLOSED, and OFF is OPEN. 2 - NO save state will allow state of sensor to toggle OPEN/CLOSE based on OFF to ON signal. 3 - NC save state will allow state of sensor to toggle OPEN/CLOSE based on ON toOFF signal. | 2 | 1 | 0 | 3 | 0 | From | To | Description |
|---|
0 | 0 | NO Toggle / Follow state will follow the input of the dry contact terminals where OFF is CLOSED, and ON is OPEN. | 1 | 1 | NC Toggle / Follow state will follow the input of the dry contact terminals where ON is CLOSED, and OFF is OPEN. | 2 | 2 | NO save state will allow state of sensor to toggle OPEN/CLOSE based on OFF to ON signal. | 3 | 3 | NC save state will allow state of sensor to toggle OPEN/CLOSE based on ON toOFF signal. |
|
1 | Sensor Operation Mode | This parameter defines if the internal magnet sensor or the external terminal input is detected and used to issue alarm notification. There is always one input active only. The other sensor input the deactivated. | 3 | 1 | 0 | 1 | 0 | From | To | Description |
|---|
0 | 0 | Internal Magnet Sensor Used and scene activation enabled | 1 | 0 | External Terminal Inputs Used and scene activation disabled |
|
3 | Sensor State Polarity | This parameter defines the polarity of the magnet sensor. | 3 | 1 | 0 | 1 | 0 | From | To | Description |
|---|
0 | 0 | Closed when Magnet near | 1 | 0 | Opened when Magnet near |
|
11 | Time Delay of "Off" command frame | Off command is sent after a delay defined in this parameter. | 2 | 2 | 0 | 32400 | 0 | From | To | Description |
|---|
0 | 32400 | seconds |
|
17 | 5th Association Group triggers | Parameter defines events which result in sending On/Off commands to devices added to the 2nd Association Group. These commands are sent alternately to switch the devices On and Off. Commands represent the values of BASIC SET command frames. | 2 | 1 | 0 | 2 | 0 | From | To | Description |
|---|
0 | 0 | Switch after Open and Close | 1 | 1 | Switch after Open | 2 | 2 | Switch after Close |
|
255 | Reset Parameter | 0 – Nothing happens 0x55555555 – Completely factory reset sensor and send device reset locally notification. All other values – Reset all Parameter settings to their default settings. | 2 | 4 | 0 | 1431655765 | 0 | From | To | Description |
|---|
1 | 1431655764 | Reset all Parameter settings to their default settings. | 1431655765 | 1431655765 | Completely factory reset sensor and send device reset locally notification. |
|
