Product Recognition | |
|---|
Certification Number | ZC10-18036035 |
|---|
Name | Flood Multisensor |
|---|
Short Description | The flood multisensor PAT02 has flood, temperature and humidity, 3 sensors function in one, based on Z-WaveTM technology. |
|---|
Long Description | It is the Z-WaveTM plus product, it support the security, OTA... Those newest features of the Z-WaveTM technology. Z-WaveTM is a wireless communication protocol designed for home automation, specifically to remotely control applications in residential and light commercial environments. The technology uses a low-power RF radio embedded or retrofitted into home electronics devices and systems, such as lighting, home access control, entertainment systems and household appliances |
|---|
Brand | Philio Technology |
|---|
Product Identifier | PAT02-1A |
|---|
OEM Version | HW: 1 FW: 1.14:01.12 |
|---|
Hardware Platform | SD3502 |
|---|
Z-Wave Version | 6.51.06 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | Notification Sensor |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_REPORTING |
|---|
Manufacturer ID | 0x013C |
|---|
Product Type ID | 0x0002 |
|---|
Product ID | 0x001F |
|---|
User Icon | 0x0C05 |
|---|
Installer Icon | 0x0C05 |
|---|
Frequency Plans | RU: 869.00MHz |
|---|
Categories | Sensors |
|---|
Countries / Regions | Russian Federation |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_SENSOR_MULTILEVEL_V5 | Sensor Multilevel V5 | 0x31 | 5 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_SECURITY | Security S0 | 0x98 | 1 | COMMAND_CLASS_SENSOR_BINARY_V2 | Sensor Binary V2 | 0x30 | 2 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2 | Firmware Update Meta-Data V2 | 0x7A | 2 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_NOTIFICATION_V4 | Notification V4 | 0x71 | 4 | COMMAND_CLASS_MULTI_CMD | Multi-Command | 0x8F | 1 |
|
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_BASIC | Basic | 0x20 | 1 |
|
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Supported Notification Types | Value |
|---|
Water Alarm | Home Security |
| Sensors | Value |
|---|
Air Temperature | Humidity |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 8 | 0 | The group 1 is for receiving the report message, like triggered event, temperature, humidity etc. | 2 | 8 | 0 | The group 2 is for the light control, the device will send the “Basic Set” command to this group. |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
5 | Operation Mode | Operation mode. Using bit to control. Bit0: Disable the Flood function Bit3: Setting the temperature scale. 0: Fahrenheit, 1:Celsius Bit5: Disable the temperature report after event triggered. (1:Disable, 0:Enable) | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
5 | 5 | Bit5: Disable the temperature report after event triggered. (1:Disable, 0:Enable) | 3 | 3 | Bit3: Setting the temperature scale. 0: Fahrenheit, 1:Celsius | 0 | 0 | Bit0: Disable the Flood function. |
| 6 | Mult- Sensor Function Switch | Multisensor function switch. Using bit to control. Bit6: Disable the humidity report after event triggered. (1:Disable, 0:Enable) | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
6 | 6 | Bit6: Disable the humidity report after event triggered. (1:Disable, 0:Enable) |
| 7 | Customer Function | Customer function switch, using bit control. Bit3: Disable send out BASIC OFF after the flood event cleared. (1:Disable, 0:Enable) Bit4: Notification Type, 0: Using Notification Report. 1: Using Sensor Binary Report Bit5: Disable Multi CC in auto report. (1:Disable, 0:Enable) Bit6: Disable to report battery state when the device triggered. (1:Disable, 0:Enable) | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
3 | 3 | Bit3: Disable send out BASIC OFF after the flood event cleared. (1:Disable, 0:Enable) | 4 | 4 | Bit4: Notification Type, 0: Using Notification Report. 1: Using Sensor Binary Report. | 5 | 5 | Bit5: Disable Multi CC in auto report. (1:Disable, 0:Enable) | 6 | 6 | Bit6: Disable to report battery state when the device triggered. (1:Disable, 0:Enable) |
| 23 | Humidity Differential Report | The humidity differential to report. 0 means turn off this function. The unit is percentage. Enable this function the device will detect every 10 seconds. | 0 | 1 | 0 | 0 | 5 | From | To | Description |
|---|
0 | 60 | The humidity differential to report. 0 means turn off this function. The unit is percentage. Enable this function the device will detect every 10 seconds. |
| 1 | Basic Set OFF Level | Setting the BASIC command value. When the flood trigger off(0x00), send the BASIC CC to the group 2. | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
-128 | 127 | Setting the BASIC command value. When the flood trigger off(0x00), send the BASIC CC to the group 2. |
| 2 | Basic Set ON Level | Setting the BASIC command value. When the flood trigger on(0xFF), send the BASIC CC to the group 2. | 0 | 1 | 0 | 0 | -127 | From | To | Description |
|---|
-128 | 127 | Setting the BASIC command value. When the flood trigger on(0xFF), send the BASIC CC to the group 2. |
|
|
|---|
Texts | ID | Description | Value |
|---|
1 | Inclusion | 1. Have Z-WaveTM Controller entered inclusion mode.
2. Pressing the tamper key three times within 1.5 seconds to enter the inclusion mode.
3. After add successful, the device will wake to receive the setting command from Z-WaveTM Controller about 20 seconds. | 2 | Exclusion | 1. Have Z-WaveTM Controller entered exclusion mode.
2. Pressing tamper key three times within 1.5 seconds to enter the exclusion mode.
Node ID has been excluded. | 4 | Device Wake-Up | After the device adding to the network, it will wake-up once per day in default. When it wake-up it will broadcast the “Wake Up Notification” message to the network, and wake-up 10 seconds for receive the setting commands.
The wake-up interval minimum setting is 30 minutes, and maximum setting is 120 hours. And the interval step is 30 minutes.
Press the tamper key once. The device will wake-up 10 seconds. | 5 | Factory Reset | Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.
1. Pressing tamper key four times within 1.5 seconds and do not release the tamper key in the 4th pressed, and the LED will light ON.
2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the tamper key. If successful, the LED will light ON one second. Otherwise, the LED will flash once.
3. IDs are excluded and all settings will reset to factory default. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Water Alarm | (Refer to parameters): State idle | Home Security | (Refer to parameters): State idle |
|
|---|
Supported Multilevel Sensors | Multilevel Sensor Type |
|---|
Air temperature | Humidity |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
