8 | Where to find S2 DSK on product | When tapping the Setting button, a Settings dialog will be displayed.
Select an item to be set. When tapping an item, a dialog will be displayed.
・GW DSK
Show Gateway DSK(QR CODE) |
23 | Controller Classic Inclusion | To add a device to the Z-Wave™ network, press the “Inclusion” button in the Android Controller Application. This will put the gateway into Inclusion Mode. Then a gateway operation dialog will appear in the Android Controller Application. The gateway opera |
24 | Controller Classic Exclusion | To remove a device from the Z-Wave™ network, press the “Exclusion” button in the Android Controller Application. This will put the gateway into Exclusion Mode. A gateway operation dialog will appear in the
Android Controller Application. The gateway oper |
11 | Controller SmartStart Inclusion | This product supports SmartStart integration and can be included in the network by scanning the QR code or entering the PIN.
Display the registered provisioning list (DSK and inclusion status).
Press “Add” to display the camera screen.
As the camera st |
25 | Controller Provisioning List | Display the registered provisioning list (DSK and inclusion status).
Press an item in the list to delete it. |
3 | Controller Learn Mode | To add an IoT gateway into another Z-Wave™ network as a secondary controller or inclusion controller, press “Learn Mode Classic” or “Learn Mode NWI” in the Settings dialog. A gateway Operation dialog will appear and will be displayed during the Learn Mode |
10 | Controller Replication | In the event that the gateway is already the controller of the Z Wave™ network, put the gateway into Inclusion Mode, and put another controller into the Learn Mode. The Replication will begin and network information will be sent to another controller. In |
5 | Factory Reset Procedure | Press “RESET” in the Factory Default Reset dialog. This will reset the Z-Wave™ chip, and the gateway will show “DEVICE RESET LOCALLY NOTIFICATION” after the restart.
If this controller is the primary controller for your network, resetting it will result |
