Glass Break Sensor EU – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC14-21120041

Name

Glass Break Sensor EU

Short Description

Ring Alarm Glass Break Sensor is a wireless sensor for the Ring Alarm system which provides users the ability to know when a glass break is detected.

Long Description

Ring Alarm Glass Break Sensor is a wireless sensor for the Ring Alarm system which provides users the ability to know when a glass break is detected. After installing the sensor on a wall or ceiling or shelf and setting up the sensor in the Ring app, monitor and receive notifications when the glass break is detected. The Ring Alarm Base Station is required to enable Glass Break Sensor features and functions within the Ring app.

Brand

Ring

Product Identifier

Glass Break Sensor EU

Product Line

Ring Alarm

OEM Version

HW: 01 FW: 01.05:01.01

Hardware Platform

ZGM130S037HGN2 / ZGM130S037HGN1

Z-Wave Version

7.16.3

Library Type

END_NODE_ENHANCED_232

Device Type

Notification Sensor DT

Role Type

ROLE_TYPE_SLAVE_SLEEPING_LISTENING

Manufacturer ID

0x0346

Product Type ID

0x0A01

Product ID

0x0401

User Icon

0x2102

Installer Icon

0x2102

Frequency Plans

EU: 869.85MHz, 868.40MHz

Categories

Sensors

Countries / Regions

European Union

Supported Command Classes

S2 Classes

S2_AUTHENTICATED

Documents

Features

Association Groups

Configuration Parameters

Texts

ID	Description	Value
8	Where to find S2 DSK on product	Classic Inclusion Steps: 1. Initiate add flow for Security Devices in the Ring mobile application – Follow the guided add flow instructions provided in the Ring mobile application. 2. Select add manually and enter the 5-digit DSK pin found on the package of the Ring Alarm Glass Break Sensor or the 5-digit DSK pin found under the QR code on the device. 3. After powering on the device, press and hold the setup button on the front for 3 seconds. Release the button and the device will enter Classic inclusion mode.
1	Classic Inclusion	Classic Inclusion Steps: 1. Initiate add flow for Security Devices in the Ring mobile application – Follow the guided add flow instructions provided in the Ring mobile application. 2. Select add manually and enter the 5-digit DSK pin found on the package of the Ring Alarm Glass Break Sensor or the 5-digit DSK pin found under the QR code on the device. 3. After powering on the device, press and hold the setup button on the front for 3 seconds. Release the button and the device will enter Classic inclusion mode.
2	Classic Exclusion	Exclusion Instructions: 1. Initiate remove “Ring Alarm Glass Break Sensor” flow in the Ring Alarm mobile application – Select the settings icon from device details page and choose “Remove Device” to remove the device. This will place the controller into Remove or “Z-Wave Exclusion” mode. 2. With the controller in Remove (Z-Wave Exclusion) mode, use a paper clip or similar object and tap the pinhole button. The device’s red LED turns on solid to indicate the device was removed from the network.
4	Wake-Up Procedure	Comm Test / Manual Wake Up A comm test can be triggered by press the button on the front of the device. This will cause the device to send a Comm test Notification. A solid Green LED indicates a successful comm test.
5	Factory Reset Procedure	Factory Default Instructions 1. 1. To restore Ring Alarm Glass Break Sensor to factory default settings, locate the pinhole reset button on the device. This is found inside the battery compartment on the back of the device after removing the back bracket. 2. Using a paperclip or similar object, insert it into the pinhole, press and hold the button down for 10 seconds. 3. The device will rapidly blink green continuously for 10 seconds. After about 10 seconds, when the green blinking stops, release the button. The red LED will turn on solid to indicate the device was removed from the network.

Supported Notification Types

Supports NWI

Yes

Supports Explorer Frames

Yes

Is Flirs

Yes

Supports SmartStart

Yes

Radio Range Z-Wave (m)