Product Recognition | |
|---|
Certification Number | ZC14-21120039 |
|---|
Name | Glass Break Sensor |
|---|
Short Description | Ring Alarm Glass Break Sensor is a wireless sensor for the Ring Alarm system which provides users the ability to know when a glass break is detected. |
|---|
Long Description | Ring Alarm Glass Break Sensor is a wireless sensor for the Ring Alarm system which provides users the ability to know when a glass break is detected. After installing the sensor on a wall or ceiling or shelf and setting up the sensor in the Ring app, monitor and receive notifications when the glass break is detected. The Ring Alarm Base Station is required to enable Glass Break Sensor features and functions within the Ring app. |
|---|
Brand | Ring |
|---|
Product Identifier | Glass Break Sensor |
|---|
Product Line | Ring Alarm |
|---|
OEM Version | HW: 01 FW: 01.05:01.01 |
|---|
Hardware Platform | ZGM130S037HGN2 / ZGM130S037HGN1 |
|---|
Z-Wave Version | 7.16.3 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Notification Sensor DT |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_LISTENING |
|---|
Manufacturer ID | 0x0346 |
|---|
Product Type ID | 0x0A01 |
|---|
Product ID | 0x0301 |
|---|
User Icon | 0x2102 |
|---|
Installer Icon | 0x2102 |
|---|
Frequency Plans | US_LR: 912.00MHz, 920.00MHz |
|---|
Categories | Sensors |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_BATTERY_V3 | Battery V3 | 0x80 | 3 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 |
|
|---|
S2 Classes | S2_AUTHENTICATED |
|---|
Documents | Category | Description | File |
|---|
Manual_English | Base on Market Cert review, fixed the issue on User manual. | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Color | | Outdoor Use | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Flag Advanced | Size | Min Value | Max Value | Default Value |
|---|
1 | Heartbeat Interval | empty | 1 | Yes | 1 | 0 | 0 | 0x46 | 2 | Application Retries | empty | 1 | Yes | 1 | 0 | 0 | 0x01 | 3 | Application Level Retry Base Wait Time Period | empty | 1 | Yes | 1 | 0 | 0 | 0x05 | 4 | Low Battery Threshold (percentage) | empty | 1 | Yes | 1 | 0 | 0 | 0x19 | 5 | Critical Battery Threshold (percentage) | empty | 1 | Yes | 1 | 0 | 0 | 0x0A | 6 | Supervisory Report Timeout | empty | 1 | Yes | 2 | 0 | 0 | 0x2710 | 7 | Z-wave Sleep Timeout (secs) | empty | 1 | Yes | 1 | 0 | 0 | 0x0A | 8 | Glass break Clear delay (in seconds) | empty | 1 | Yes | 1 | 0 | 0 | 0x0F | 9 | Faults within clear delay flag | empty | 1 | Yes | 1 | 0 | 0 | 0x00 | 10 | Enable LED | empty | 1 | Yes | 1 | 0 | 0 | 0x01 | 11 | Enable detection | empty | 1 | Yes | 1 | 0 | 0 | 0x00 | 17 | Mic-OFF time | empty | 1 | Yes | 1 | 0 | 0 | 0x06 |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | Classic Inclusion Steps:
1. Initiate add flow for Security Devices in the Ring mobile application – Follow the guided add flow instructions provided in the Ring mobile application.
2. Select add manually and enter the 5-digit DSK pin found on the package of the Ring Alarm Glass Break Sensor or the 5-digit DSK pin found under the QR code on the device.
3. After powering on the device, press and hold the setup button on the front for 3 seconds. Release the button and the device will enter Classic inclusion mode. | 1 | Classic Inclusion | Classic Inclusion Steps:
1. Initiate add flow for Security Devices in the Ring mobile application – Follow the guided add flow instructions provided in the Ring mobile application.
2. Select add manually and enter the 5-digit DSK pin found on the package of the Ring Alarm Glass Break Sensor or the 5-digit DSK pin found under the QR code on the device.
3. After powering on the device, press and hold the setup button on the front for 3 seconds. Release the button and the device will enter Classic inclusion mode. | 2 | Classic Exclusion | Exclusion Instructions:
1. Initiate remove “Ring Alarm Glass Break Sensor” flow in the Ring Alarm mobile application – Select the settings icon from device details page and choose “Remove Device” to remove the device. This will place the controller into Remove or “Z-Wave Exclusion” mode.
2. With the controller in Remove (Z-Wave Exclusion) mode, use a paper clip or similar object and tap the pinhole button. The device’s red LED turns on solid to indicate the device was removed from the network. | 4 | Wake-Up Procedure | Comm Test / Manual Wake Up
A comm test can be triggered by press the button on the front of the device. This will cause the device to send a Comm test Notification. A solid Green LED indicates a successful comm test. | 5 | Factory Reset Procedure | Factory Default Instructions
1. 1. To restore Ring Alarm Glass Break Sensor to factory default settings, locate the pinhole reset button on the device. This is found inside the battery compartment on the back of the device after removing the back bracket.
2. Using a paperclip or similar object, insert it into the pinhole, press and hold the button down for 10 seconds.
3. The device will rapidly blink green continuously for 10 seconds. After about 10 seconds, when the green blinking stops, release the button. The red LED will turn on solid to indicate the device was removed from the network. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Home Security | (Refer to parameters): State idle | Home Security | Sensor status: Intrusion | Home Security | Cover status: Tampering, product cover removed | Power Management | Power status: Power has been applied | Power Management | Voltage drop/drift | System | SW status: System software failure (manufacturer proprietary failure code provided) | System | Heartbeat |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Is Flirs | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave LR (m) | 400 |
|---|
