Product Recognition | |
|---|
Certification Number | ZC10-16075139 |
|---|
Name | Heimdall |
|---|
Short Description | Heimdall is a smart home Gateway designed by BTstar Technology Co.,Ltd. |
|---|
Long Description | Remote control and management of home device.
Support real-time control
Timing arrangement
Scenarios Design
Support real-time monitoring
Smart products including gateway/controller, siren, smart plug, door sensor, lights, door lock ..etc |
|---|
Brand | BTSTAR |
|---|
Product Identifier | Heimdall |
|---|
OEM Version | HW: 1 FW: 4.05:01.01 |
|---|
Hardware Platform | SD3503 |
|---|
Z-Wave Version | 6.51.06 |
|---|
Library Type | CONTROLLER_STATIC |
|---|
Device Type | Gateway |
|---|
Role Type | ROLE_TYPE_CONTROLLER_CENTRAL_STATIC |
|---|
Manufacturer ID | 0x024A |
|---|
Product Type ID | 0x0102 |
|---|
Product ID | 0x0304 |
|---|
User Icon | 0x0500 |
|---|
Installer Icon | 0x0500 |
|---|
Frequency Plans | EU: 869.85MHz, 868.40MHz |
|---|
Categories | All Controllers, Gateway Controller |
|---|
Countries / Regions | European Union |
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_NO_OPERATION | No Operation | 0x00 | 1 | COMMAND_CLASS_THERMOSTAT_FAN_MODE_V4 | Thermostat Fan Mode V4 | 0x44 | 4 | COMMAND_CLASS_USER_CODE | User Code | 0x63 | 1 | COMMAND_CLASS_DOOR_LOCK_V2 | Door Lock V2 | 0x62 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi-Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_SWITCH_BINARY | Switch Binary | 0x25 | 1 | COMMAND_CLASS_BASIC | Basic | 0x20 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_CRC_16_ENCAP | CRC16 Encapsulation | 0x56 | 1 | COMMAND_CLASS_SECURITY | Security S0 | 0x98 | 1 | COMMAND_CLASS_SENSOR_MULTILEVEL_V7 | Sensor Multilevel V7 | 0x31 | 7 | COMMAND_CLASS_THERMOSTAT_MODE_V3 | Thermostat Mode V3 | 0x40 | 3 | COMMAND_CLASS_THERMOSTAT_SETPOINT_V3 | Thermostat Setpoint V3 | 0x43 | 3 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_SWITCH_MULTILEVEL_V3 | Switch Multilevel V3 | 0x26 | 3 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_METER_V3 | Meter V3 | 0x32 | 3 | COMMAND_CLASS_MULTI_CHANNEL_V4 | Multi-Channel V4 | 0x60 | 4 | COMMAND_CLASS_SWITCH_COLOR_V2 | Switch Color V2 | 0x33 | 2 | COMMAND_CLASS_NOTIFICATION_V5 | Notification V5 | 0x71 | 5 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CMD | Multi-Command | 0x8F | 1 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 | Association Group Information V2 | 0x59 | 2 |
|
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Communications Connections | Value |
|---|
Ethernet (Wired) | Ethernet (Wireless/WiFi) |
| Controller Supports Multiple Z-Wave Interfaces | | Firmware Updatable | Value |
|---|
Updatable by Consumer by Wire |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 1 | 0 | Z-Wave Plus Lifeline |
|
|---|
Texts | ID | Description | Value |
|---|
24 | Controller Exclusion | A. Ensure gateway connected, click “Remove” to Exclude devices, please flick the right button to excluded it according to the product manual.
B. After device Exclude show information , At the same time the
device is removed at the “Device” interface. | 23 | Controller Inclusion | A. Ensure Gateway is connected, enter device page and click “Add” to include devices, please flick the right button to include it according to the product manual.
B. After device include show information (as attached photo), You can view the device at the “Device” interface
C. If cannot include the device in 60 seconds, please remove the device and
include it again.
D. In the process of inclusion, please note the In/Ex changes of gateway, lights flash
only when the gateway works properly. | 5 | Factory Reset | Click “Reset” , show “Proccessing…” to reset the Z-Wave network.Refer user manual page 12 | 3 | Learn Mode (adding another controller) | Ensure the Gateway not included any device or Reset the Gateway.
You can review and control the device for learned Gateway.
Into the Learn Mode, show “Processing…” , operate another Controller into inclusion device mode, after the completion of the study to be prompted to inclusion success.
When you need initiate a replication of network information from the controller to another controller or want to receive network information, please enter ""include"" and ""learn mode""； Refer user manual page 11. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
