Product Recognition
Certification Number	ZC10-17085722
Name	Home IoT
Short Description	Home IoT Terminal TH-GW10
Long Description	This home gateway (HGW) works as a hub for IoT devices including sensors. Design: as the HGW will be used in a living room, it has a minimal cylindrical design conveying a sense of quality Wide-angle camera Voice control Bluetooth speaker
Brand	TOSHIBA
Product Identifier	TH-GW10
OEM Version	HW: 1 FW: 5.10:02.25:01.00
Hardware Platform	ZM5304
Z-Wave Version	6.61.00
Library Type	CONTROLLER_BRIDGE
Device Type	Gateway
Role Type	ROLE_TYPE_CONTROLLER_CENTRAL_STATIC
Manufacturer ID	0x0333
Product Type ID	0x0001
Product ID	0x0001
User Icon	0x0500
Installer Icon	0x0500
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	All Controllers, Gateway Controller
Countries / Regions	United States of America
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_APPLICATION_STATUS Application Status 0x22 1 COMMAND_CLASS_CRC_16_ENCAP CRC16 Encapsulation 0x56 1 COMMAND_CLASS_SECURITY Security S0 0x98 1 COMMAND_CLASS_VERSION_V2 Version V2 0x86 2 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO Association Group Info 0x59 1 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_DOOR_LOCK Door Lock 0x62 1 COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_ZIP_V3 Z/IP V3 0x23 3 COMMAND_CLASS_ZIP_PORTAL Z/IP Portal 0x61 1 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 Multi-Channel Association V3 0x8E 3 COMMAND_CLASS_BATTERY Battery 0x80 1 COMMAND_CLASS_SWITCH_BINARY Switch Binary 0x25 1 COMMAND_CLASS_BASIC Basic 0x20 1 COMMAND_CLASS_CONFIGURATION Configuration 0x70 1 COMMAND_CLASS_CRC_16_ENCAP CRC16 Encapsulation 0x56 1 COMMAND_CLASS_SECURITY Security S0 0x98 1 COMMAND_CLASS_SENSOR_BINARY_V2 Sensor Binary V2 0x30 2 COMMAND_CLASS_SENSOR_MULTILEVEL_V6 Sensor Multilevel V6 0x31 6 COMMAND_CLASS_THERMOSTAT_FAN_MODE_V3 Thermostat Fan Mode V3 0x44 3 COMMAND_CLASS_THERMOSTAT_MODE_V2 Thermostat Mode V2 0x40 2 COMMAND_CLASS_THERMOSTAT_SETPOINT_V2 Thermostat Setpoint V2 0x43 2 COMMAND_CLASS_VERSION_V2 Version V2 0x86 2 COMMAND_CLASS_WAKE_UP_V2 Wake Up V2 0x84 2 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_SWITCH_MULTILEVEL_V3 Switch Multilevel V3 0x26 3 COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_METER_V3 Meter V3 0x32 3 COMMAND_CLASS_ASSOCIATION_GRP_INFO Association Group Info 0x59 1 COMMAND_CLASS_MULTI_CHANNEL_V4 Multi-Channel V4 0x60 4 COMMAND_CLASS_ZIP_GATEWAY Z/IP Gateway 0x5F 1 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2 COMMAND_CLASS_NOTIFICATION_V4 Notification V4 0x71 4 COMMAND_CLASS_MULTI_CMD Multi-Command 0x8F 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual User’s Guide.pdf
Features	Feature Values Communications Connections Value Ethernet (Wireless/WiFi) Bluetooth Supported Notification Types Value Smoke Alarm CO Alarm Heat Alarm Access Control Home Security Emergency Alarm Gas Alarm Color Value Antique Brass Sensors Value Air Temperature Luminance Humidity Smoke Density General Purpose Carbon Monoxide
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 1 0 Z-Wave Plus Lifeline
Texts	ID Description Value 23 Controller Inclusion Described in Product manual “Items on Home Screen” Adding a sensor Follow the steps below to add a sensor. 1. Tap Add Sensor. 2. Tap Add Sensor on the displayed screen. (The app starts searching a sensor and the screen below appears.) 3. Operate the sensor you are adding so that the app can find it. Refer to the instruction manual supplied for the sensor for details. When the app finds a sensor, the screen below appears. 4. Tap Done. The sensor has been added to the app. 24 Controller Exclusion Described in Product manual “Items on Home Screen” Removing a sensor Follow the steps below to remove a sensor. 1. Tap a sensor icon you want to remove on the Home screen. 2. Tap Remove Sensor on the displayed screen. The screen below appears and the app starts removing the sensor. 3. Tap OK on the displayed screen. The sensor has been removed. 3 Learn Mode (adding another controller) To enter Learn Mode, the operation is available only via Web UI. Please reboot the device; hold down the network button (backside) and Volume Down until you see the Top LED board blinking, then you can release the buttons. Next step, you can check the IP Address of the device from the APP. Open a web browser and enter the web URL, https://, with the username and password, toshiba/homeiot. After you logged in, you can select Network Manager at the left side and click the button, ""Initiate."". Please note, if the device is already set as a controller, you need to click the Reset button first. 5 Factory Reset Described in Product manual “Parts Name” >Reset button Press and hold the button using a pen tip or like for 5 seconds or more. Pressing and holding the button makes the all Volume indicators and Microphone mute indicators starts blinking. After blinking stops, release button. After that, the settings have been reverted back to the default. If this controller is the primary controller of Z-Wave for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller of Z-Wave in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
Supports NWI	Yes
Supports Explorer Frames	Yes