Product Recognition
Certification Number	ZC10-16105263
Name	In-Wall Dimmer Switch
Short Description	In-Wall dimmer
Long Description	It is an In-wall type device controlled by Z-Wave controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access, you can dim lights at home from your mobile phone separately, and manual dim light by push button .
Brand	show home
Product Identifier	ZW31T
OEM Version	HW: 1 FW: 20.15
Hardware Platform	ZM5202
Z-Wave Version	6.51.07
Library Type	SLAVE_ROUTING
Device Type	Light Dimmer Switch
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x015D
Product Type ID	0x0111
Product ID	0x261C
User Icon	0x1C00
Installer Icon	0x1C02
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	All Lighting Devices, Dimming Lighting Devices
Countries / Regions	United States of America
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual ZW31T-manual1004.pdf
Features	Feature Values Electric Load Type Value Incandescent Switch Load Capacity Watts Value 500 Neutral Wire Required Switch Type Value Push Button
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Z-Wave Plus Lifeline
Texts	ID Description Value 2 Exclusion 1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. 2. Once the controller is ready to Exclude your device, triple press the Up/Down push button to exclude it from the network. 5 Factory Reset 1. Use controller to remove device from network will reset it to factory default. 2. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable. 1 Inclusion 1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. 2. Once the controller is ready to include your device, triple press the Up/Down push button to include it into the network. 3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance. 4. The device is associated in the same group when it included in setting process. Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed. If your controller features remote access, you can now control all devices in Z-Wave network from mobile devices.
Supports NWI	Yes
Supports Explorer Frames	Yes