| Product Recognition | |
|---|
| Certification Number | ZC10-16065099 |
|---|
| Name | In-Wall Smart Dimmer |
|---|
| Short Description | In-wall Smart Dimmer |
|---|
| Long Description | It is an In-wall type device controlled by Z-Wave controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access, you can dim lights at home from your mobile phone separately, and manual dim light by push button . |
|---|
| Brand | show home |
|---|
| Product Identifier | ZW31 |
|---|
| OEM Version | HW: 1 FW: 20.15 |
|---|
| Hardware Platform | ZM5202 |
|---|
| Z-Wave Version | 6.51.06 |
|---|
| Library Type | SLAVE_ROUTING |
|---|
| Device Type | Light Dimmer Switch |
|---|
| Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
| Manufacturer ID | 0x015D |
|---|
| Product Type ID | 0x0112 |
|---|
| Product ID | 0x1F1C |
|---|
| User Icon | 0x1C00 |
|---|
| Installer Icon | 0x1C02 |
|---|
| Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
| Categories | All Lighting Devices, Dimming Lighting Devices |
|---|
| Countries / Regions | United States of America |
|---|
| Documents | |
|---|
| Features | | Feature | Values |
|---|
| Electric Load Type | | Value |
|---|
| Incandescent | | Dimmable LED |
| | Firmware Updatable | | Value |
|---|
| Updatable by Professional/Technician |
| | Color | | | IP (Ingress Protection) Rated | | | Switch Load Capacity Watts | | | Neutral Wire Required | | | Outdoor Use | | | Switch Type | | Value |
|---|
| Decorator Paddle Rocker |
|
|
|---|
| Association Groups | | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
| 1 | 5 | 0 | Z-Wave Plus Lifeline |
|
|---|
| Texts | | ID | Description | Value |
|---|
| 1 | Inclusion | 1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.
2. Once the controller is ready to include your device, triple press the Up/Down push button to include it in the network.
3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.
4. The device is associated in the same group when it included in setting process.
Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed. | | 2 | Exclusion | 1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.
Once the controller is ready to Exclude your device, triple press the Up/Down push button to exclude it from the network. | | 5 | Factory Reset | Use controller to remove device from network will reset it to factory default.
*Use this procedure only in the event that the network primary controller is missing or otherwise inoperable. |
|
|---|
| Supports NWI | Yes |
|---|
| Supports Explorer Frames | Yes |
|---|
