Product Recognition | |
|---|
Certification Number | ZC10-18096230 |
|---|
Name | LGU+ IoT Switch |
|---|
Short Description | U+ Switch enables Light ON/OFF remotely with push buttons and wireless connection(Z-Wave) |
|---|
Long Description | U+ Switch enables Light ON/OFF remotely with push buttons and wireless connection(Z-Wave)
- It is easy to install.
- Support 480(Watt) light power capacity.
- Support temperature & humidity measurement.
- Notification function for malfunction. |
|---|
Brand | LGU+ IoT@home |
|---|
Product Identifier | SSE-304 |
|---|
OEM Version | HW: 4 FW: 39.16 |
|---|
Hardware Platform | ZM5101 |
|---|
Z-Wave Version | 6.71.03 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | On/Off Power Switch |
|---|
Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
Manufacturer ID | 0x0233 |
|---|
Product Type ID | 0x0059 |
|---|
Product ID | 0x0001 |
|---|
User Icon | 0x0700 |
|---|
Installer Icon | 0x0700 |
|---|
Frequency Plans | KR: 920.90MHz, 921.70MHz, 923.10MHz |
|---|
Categories | All Lighting Devices, On/Off Switches/Devices |
|---|
Countries / Regions | Republic of Korea |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4 | Firmware Update Meta-Data V4 | 0x7A | 4 | COMMAND_CLASS_SENSOR_MULTILEVEL_V5 | Sensor Multilevel V5 | 0x31 | 5 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi-Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_SWITCH_BINARY | Switch Binary | 0x25 | 1 | COMMAND_CLASS_BASIC | Basic | 0x20 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_MULTI_CHANNEL_V4 | Multi-Channel V4 | 0x60 | 4 | COMMAND_CLASS_SECURITY_2 | Security S2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_NOTIFICATION_V4 | Notification V4 | 0x71 | 4 |
|
|---|
S2 Classes | S2_UNAUTHENTICATED |
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Sensors | Value |
|---|
Air Temperature | Humidity |
| Firmware Updatable | Value |
|---|
Updatable by Professional/Technician |
| Supported Notification Types | | Switch Type | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 5 | 0 | ZWAVE Plus Lifeline | 2 | 5 | 0 | Button 1 switch ON/OFF Notification | 3 | 5 | 0 | Button 2 switch ON/OFF Notification | 4 | 5 | 0 | Button 3 switch ON/OFF Notification |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
1 | Temperature & Humidity transmission period time. | Temperature & Humidity transmission period time. The unit is second. | 0 | 2 | 0 | 0 | 600 | From | To | Description |
|---|
60 | 3600 | This unit is second. | 0 | 0 | |
|
|
|---|
Texts | ID | Description | Value |
|---|
6 | Additional Special Features | This device supports temperature & humidity measurement function. | 5 | Factory Reset | 1) Hold the low touch button for 10 seconds.
- Keep holding the button, then at 5 second, red LED of 3rd
button is blinking 6 times and keep holding10 seconds
later, red LED of 3rd is blinking 6 times again. In this time
factory reset will be started if you release the button.
2) After factory reset is done, all the lamps will be turned off
and all variables will be initialized to default values.
Please use this procedure only when the network primary controller is missing or otherwise inoperable. | 1 | Inclusion | ▶ Add / Remove by the button in the bottom (3rd Button)
▶ Press the 3rd button for above 5 seconds,
- Then, red color LED blinks every 0.5 second 6 times.
- At this time released the button during the red color LED
blinking.
- Then, ZWAVE Add / Remove operation is started.
- Over 30 seconds, Inclusion/ Exclusion mode is stopped. | 2 | Exclusion | ▶ Press the 3rd button for above 5 seconds,
- Then, red color LED blinks every 0.5 second 6 times.
- At this time released the button during the red color LED
blinking.
- Then, ZWAVE Add / Remove operation is started.
- Over 30 seconds, Inclusion/ Exclusion mode is stopped. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Power Management | (Refer to parameters): State idle |
|
|---|
Supported Multilevel Sensors | Multilevel Sensor Type |
|---|
Air temperature | Humidity |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
