Product Recognition | |
|---|---|
Certification Number | ZC10-19026384 |
Name | Mold Detector |
Short Description | The device measures environmental parameters and will warn when the air in the room will allow growth of mold. |
Long Description | This device measures the three air quality parameters temperature, humidity and dew point an reports them to a central controller. Beside this, the device can directly control groups of other Z-Wave devices on over- and undershooting a set temperature and/or humidity parameter. This can be used to establish control loops for temperature and humidity. The device wakes up every 4 minutes to measure the values and it will send unsolicited reports when values change. Additionally, the device will report all values on request.
The mold detector is actively monitoring the danger of mold in a room based on the temperature and humidity and will issue alarm warnings when critical air conditions met. Wireless Alarm and red and a green blinking LED will indicate a mold condition. This local LED warning function is also available when the device is not included in any Z-Wave network and works stand alone. |
Brand | Popp & Co. |
Product Identifier | POPE700878 |
OEM Version | HW: 1 FW: 1.00 |
Hardware Platform | ZM5101 |
Z-Wave Version | 6.81.01 |
Library Type | SLAVE_ENHANCED_232 |
Device Type | Notification Sensor |
Role Type | ROLE_TYPE_SLAVE_SLEEPING_REPORTING |
Manufacturer ID | 0x0154 |
Product Type ID | 0x0004 |
Product ID | 0x0014 |
User Icon | 0x0C10 |
Installer Icon | 0x0C00 |
Frequency Plans | EU: 869.85MHz, 868.40MHz |
Categories | Sensors, HVAC |
Countries / Regions | European Union |
Supported Command Classes | |
Controlled Command Classes | |
S2 Classes | S2_UNAUTHENTICATED |
Documents | |
Features | |
Association Groups | |
Configuration Parameters | |
Texts | |
Supported Notification Types | |
Supported Multilevel Sensors | |
Supports NWI | Yes |
Supports Explorer Frames | Yes |
Supports SmartStart | Yes |
Radio Range Z-Wave (m) | 40 |