Product Recognition
Certification Number	ZC14-26010580
Name	MultiSensor 8
Short Description	Aeotec MultiSensor 8
Description	Aeotec MultiSensor 8 adopts Z-Wave® technology and is an intelligent wireless sensor device that integrates motion, temperature, humidity, light and acceleration sensors. The product supports battery or USB power supply. The installation methods include ceiling installation and wall mounted installation, and the sensitivity of motion sensor is also adjustable. This product supports Security 2 Command Class. While a Security S2 enabled Controller is needed in order to fully use the security feature. This product can be operated in any Z-Wave network with other Z-Wave/ Z-Wave Plus® certified devices from other manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. This product also supports SmartStart.
Brand	Aeotec
Brand Owner	Aeotec Limited
Identifier	ZWA066-C
Product Line	Z-Wave Plus v2 line
Product URL	www.aeotec.com
OEM Version	HW: 66 FW: 01.00
Hardware Platform	EFR32ZG23A
Z-Wave Version	7.23.2
Library Type	END_NODE_ENHANCED_232
Device Type	Notification Sensor DT
Role Type	ROLE_TYPE_END_NODE_ALWAYS_ON, ROLE_TYPE_END_NODE_SLEEPING_REPORTING
Manufacturer ID	0x0371
Product Type ID	0x0002
Product ID	0x0042
User Icon	0x0C07
Installer Icon	0x0C07
Radio Range Z-Wave (m)	40
Radio Range Z-Wave LR (m)	400
Frequency Plans	EU: 869.85MHz, 868.40MHz, EU_LR: 864.00MHz, 866.00MHz
Categories	Sensors
Countries / Regions	Armenia, Bahrain, European Union, Cyprus, Moldova, Egypt, French Guiana, Georgia, Iraq, Jordan, Kazakhstan, Kuwait, Lebanon, Libya, Maldives, Mauritius, Nigeria, Oman, Philippines, Qatar, Saudi Arabia, South Africa, Turkmenistan, United Arab Emirates, ZU, Yemen
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_SENSOR_BINARY_V2 Binary Sensor V2 0x30 2 COMMAND_CLASS_CONFIGURATION_V4 Configuration V4 0x70 4 COMMAND_CLASS_SENSOR_MULTILEVEL_V11 Multilevel Sensor V11 0x31 11 COMMAND_CLASS_NOTIFICATION_V8 Notification V8 0x71 8 COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 Association Group Information (AGI) V3 0x59 3 COMMAND_CLASS_BATTERY Battery 0x80 1 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 Firmware Update Meta Data V5 0x7A 5 COMMAND_CLASS_INDICATOR_V3 Indicator V3 0x87 3 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 Multi Channel Association V3 0x8E 3 COMMAND_CLASS_VERSION_V3 Version V3 0x86 3 COMMAND_CLASS_WAKE_UP_V2 Wake Up V2 0x84 2 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_SECURITY_2 Security 2 0x9F 1 COMMAND_CLASS_SUPERVISION Supervision 0x6C 1 COMMAND_CLASS_TRANSPORT_SERVICE_V2 Transport Service V2 0x55 2 COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1
S2 Classes	S2_AUTHENTICATED, S2_UNAUTHENTICATED
Documents	Category File Manual_English SPEC-ZWA066-MultiSensor8202512191.pdf
Features	Feature Values Battery Quantity Value 2 Battery Type Value CR123A Color Value White Firmware Updatable Value Updatable by Consumer by RF
Association Groups	Group Number Maximum Nodes Supported End Point ID Group Name Profile 1 5 0 Lifeline 0x0001 2 5 0 Motion 0x7107 3 5 0 Over Heat 0x3101 4 5 0 Under Heat 0x3101 5 5 0 Over Humidity 0x3105 6 5 0 Under Humidity 0x3105 7 5 0 Over Light 0x3103 8 5 0 Under Light 0x3103 9 5 0 Mold danger 0x7110 10 5 0 Temperature 0x3101 11 5 0 Tamper 0x7107
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value 1 Enable Binary Sensor Report For motion state 2 1 0 0 0x00 2 Motion Retrigger Time Motion re-detection time 1 2 0 0 0x00F0 3 Motion Untrigger Time Motion event release delay time 1 2 0 0 0x0000 4 Motion sensitivity Sensitivity of motion sensor 1 1 0 0 0x0B 5 Motion Group Control Requirement Motion Group Control Requirement 1 2 0 0 0x7530 6 Tamper Report Enable/Disable Used to enable/disable tamper report 1 1 0 0 0x04 7 Minimum acceleration change to report Trigger acceleration report 1 1 0 0 0x00 8 Motion Group Control Group2 Motion Group Control Group2 2 1 0 0 0x00 9 Motion Group Value Setting Motion Group Value Setting 1 2 0 0 0xFF00 10 Temperature & Dew Point Scale scale for auto reports and setting 2 1 0 0 0x00 11 Threshold Check Time Set threshold Check Time 1 2 0 0 0x0000 17 Under Humidity Group Threshold Group6 Under Humidity Group Threshold 1 1 0 0 0x28 23 Temperature Threshold Minimum temperature change to report 1 1 0 0 0x0A 24 Humidity Threshold Minimum humidity change to report 1 1 0 0 0x05 25 Lux Threshold Minimum Lux change to report 1 2 0 0 0x00FA 31 Report Indicator Report Indicator 1 4 0 0 0x00032140
Texts	ID Description Value 8 Where to find S2 DSK on product Page 4 in the Manual 1 Classic Inclusion 1. Turn your main controller/ gateway into adding/ inclusion mode. 2. Press the Action Button on product twice quickly. 2 Classic Exclusion 1. Turn your main controller/ gateway into removing/ exclusion mode. 2. Press the Action Button on product twice quickly. 4 Wake-Up Procedure Click the button once. 5 Factory Reset Procedure Press and hold the action button for at least 12 seconds.
Supported Notification Types	Notification Type Event / State Heat Alarm (Refer to parameters): State idle Heat Alarm Heat sensor status: Overheat detected Heat Alarm Heat sensor status: Under heat detected Home Security (Refer to parameters): State idle Home Security Cover status: Tampering, product cover removed Home Security Motion sensor status: Motion detection Power Management (Refer to parameters): State idle Power Management Power status: Power has been applied Power Management Mains status: AC mains disconnected Power Management Mains status: AC mains re-connected Power Management Battery maintenance status: Replace battery now Weather Alarm (Refer to parameters): State idle Weather Alarm Moisture alarm status: Moisture alarm
Supported Multilevel Sensors	Multilevel Sensor Type Air temperature Illuminance Humidity Dew point Acceleration X-axis Acceleration Y-axis Acceleration Z-axis
Supports NWI	Yes
Supports Explorer Frames	Yes
Supports SmartStart	Yes