Product Recognition
Certification Number	ZC10-14080009
Name	On/Off Mini Plug
Short Description	The AN180-6 is a on/off switch mini plug
Long Description	The On/Off Mini Plug is a Z-Wave enabled device which is fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturer, and ours can also be used in other manufacturer’s Z-Wave enabled networks. Inclusion of this unit on other manufacturer’s Wireless Controller menu allows remote operation of the unit and the connected load. The On/Off Mini Plug is designed to control the on/off status of lighting and appliances load in your house. At 220-240V voltage, this Plug can support up to 1500W resistive, 800W incandescent, 200W motor, or 200W fluorescent load.
Brand	Everspring
Product Identifier	AN180-6
OEM Version	02
Hardware Platform	SD3502
Z-Wave Version	6.51.02
Library Type	SLAVE_ENHANCED_232
Device Type	On/Off Power Switch
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x0060
Product Type ID	0x0004
Product ID	0x0007
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	All Lighting Devices, On/Off Switches/Devices
Countries / Regions	European Union
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_BASIC Basic 0x20 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual manual_AN180_20140729.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 1 0 1. When the unit is powered for the first time, the unit will send a Notification Report to the node of Group 1. 2. When setting the unit or changing the unit’s status, the unit will send a Binary Switch Report to the node of Group 1. 3. Device Reset: When performing Reset the unit will send Device Reset Locally Notification to the node of Group1. 4. The minimum interval time between two reports sent from this unit to the node of Group 1 is 3 seconds. Refer to Configuration parameter 2 for more information 2 4 0 When the button on the unit or the wall switch is pressed, the unit will send a Basic Set command to the nodes of Group 2. When the unit is OFF, Basic Set Value = 0x00. When the unit is ON, Basic Set Value = 0xFF.
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2 The delaying time to report to Group 1 The delaying time to report to Group 1 0 1 0 0 3 From To 3 25 3 Remember the last status 1: Remember, 0: do not remember 0 1 0 0 1 From To 1 0 1 Basic Set Command value Basic Set Command value 0 2 0 0 255 From To 0 99 255 255
Texts	ID Description Value 1 Inclusion 1. Put the Z-Wave Controller into inclusion mode. 2. Press the link key three times within 1.5 seconds to put the unit into inclusion mode. (Please refer to the documentation for the location of the link key.) 2 Exclusion 1. Put the Z-Wave Controller into exclusion mode. 2. Press the link key three times within 1.5 seconds to put the unit into exclusion mode. (Please refer to the documentation for the location of the link key.) 3 Learn Mode (adding another controller) NR 4 Device Wake-Up NR 6 Additional Special Features NR 5 Factory Reset (This procedure should only be used when the network primary controller is inoperable.) 1. Press the link key three times within 1.5 seconds to put the unit into exclusion mode. 2. Within 1 second of step 1, press link key again and hold it until LED is off (about 5 seconds). (Please refer to the documentation for the location of the link key.) 3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 4 minutes.
Supports NWI	Yes
Supports Explorer Frames	Yes