COMMAND_CLASS_CONFIGURATION_V4

Configuration V4

0x70

4

COMMAND_CLASS_POWERLEVEL

Powerlevel

0x73

1

COMMAND_CLASS_ASSOCIATION_V3

Association V3

0

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Multi-Channel Association V3

0x8E

3

COMMAND_CLASS_INDICATOR_V3

Indicator V3

0x87

3

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Transport Service V2

0x55

2

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Device Reset Locally

0x5A

1

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Z-Wave Plus Info V2

0x5E

2

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5

Firmware Update Meta-Data V5

0x7A

5

COMMAND_CLASS_SWITCH_MULTILEVEL_V4

Switch Multilevel V4

0x26

4

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association Group Information V3

0x59

3

COMMAND_CLASS_BASIC_V2

Basic V2

0x20

2

COMMAND_CLASS_SECURITY_2

Security S2

0x9F

1

COMMAND_CLASS_VERSION_V3

Version V3

0x86

3

COMMAND_CLASS_CENTRAL_SCENE_V3

Central Scene V3

0x5B

3

COMMAND_CLASS_SUPERVISION

Supervision

0x6C

1

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Manufacturer Specific V2

0x72

2

Manual_Primary_Lang

Product Manual

Color

Firmware Updatable

Outdoor Use

Switch Load Capacity Watts

3

5

0

BASIC SET

When the output of the MP22ZD is changed, On (0xFF) or Off (0x00). The MP22ZD will automatically send out a related basic set command. On (0xFF) or Off (0x00) to its associated group.

2

5

0

BASIC SET

When the output of the MP22ZD is changed, On (0xFF) or Off (0x00). The MP22ZD will automatically send out a related basic set command. On (0xFF) or Off (0x00) to its associated group.

1

3

0

Lifeline

Z-Wave Lifeline Device Reset Locally Notification: Issued when Factory Reset is performed. Indicator Report: Issued when included successfully. Switch Multilevel Report: Issued when output level is changed. (Determined by Parameter 80). Basic Report: Issued when output level is changed(Determined by Parameter 80).

2

LED Indicator

Parameter=2，Size=1，Value=0 On when Off and Off when On Value=1 On when On and Off when Off Value=2 Always Off Value=3 Always On Default =0

2

1

0

3

0

3

Auto Turn-Off Timer

Auto Turn-Off Timer--- Values: 0 – 65535 (minutes)

2

4

0

65535

0

5

Auto Turn-On Timer

Auto Turn-On Timer

2

4

0

65535

0

8

Restores state after power failure

Restores state after power failure Parameter=8，Size=1，Value=0 output off Value=1 output on Value=2 out put the state after power Default =2

2

1

0

2

2

10

Multilevel minimum value can be set

Multilevel minimum value can be set（Local Button）> this should apply to both for local or Z-Wave operation Parameter=10，Size=1，Value=0 disable Value=1 . . Value=99 Default = 1

2

1

0

99

1

11

Multilevel maximum value can be set

Multilevel maximum value can be set（Local Button）> this should apply to both for local or Z-Wave operation Parameter=11，Size=1，Value=0 disable Value=1 . . Value=100 - NOT ACCEPTED BY HUB Default = 99

2

1

0

100

99

23

LED Indicator Color

LED Indicator Color Parameter=23，Size=1，Value=0 White Value=1 Blue Value=2 Green Value=3 Red Default = 1

2

1

0

3

1

24

LED Indicator Brightness

LED Indicator Brightness Parameter=24，Size=1，Value=0 Bright (100%) Value=1 Medium (60%) Value=2 Low (30%) Default =1

2

1

0

2

1

25

Single Tap Behavior

Single Tap Behavior: when switch is off and press UPPER paddle 1 time, switch turns on to x brightness （Local Button） Parameter=25，Size=1， Value = 0 last brightness level   Value = 1 custom value set in parameter 18   Value = 2 maximum brightness set in parameter 11 Value = 3 full 100% brightness Default = 0

2

1

0

3

0

1

Locally Button function

Parameter=1，Size=1，Value=0 Up Button: On Down Button: Off Value=1 Up Button: Off Down Button: On Value=2 Up Button: On/Off Down Button: On/Off Default = 0

2

1

0

2

0

9

Ramp rate

Ramp rate（Local Button + Z-Wave）> change to local and Z-Wave like in the latest ZEN30 firmware, also applies to any multilevel changes (so there should be soft transition between 20 and 80% brightness if changed from the hub for example) Parameter=9，Size=1, Value=1 from 0x63 to 0x00 or from 0x00 to 0x63 need 1s Value=2 from 0x63 to 0x00 or from 0x00 to 0x63 need 2s . . Value=99 from 0x63 to 0x00 or from 0x00 to 0x63 need 99s Default = 1

2

1

1

99

1

8

Where to find S2 DSK on product

The device is compatible with SmartStart SmartStart enabled products can be added into a Z-Wave™ network by scanning the Z-Wave™ QR Code found on the top of the outlet or the back of the box with a controller providing SmartStart inclusion.No further action is required and the SmartStart product will be added automatically within 10 minutes of being switched on and in the network vicinity. QR CODE the QR code are sticked to the side of the case,DSK is included in the QR code. DSK The DSK code can be found on the DSK label which is attached on the packaging box.

1

Classic Inclusion

Adding Your Device To A Hub The device support two methods of inclusion,When using a Z-Wave Plus™ certified controller choose Network Wide Inclusion or SmartStart, Network Wide Inclusion To A Z-Wave™ Network 1,Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. 2,When prompted by your primary controller, click the button three times in one second.

2

Classic Exclusion

Adding Your Device To A Hub The device support two methods of inclusion,When using a Z-Wave Plus™ certified controller choose Network Wide Inclusion or SmartStart, Network Wide Inclusion To A Z-Wave™ Network 1,Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. 2,When prompted by your primary controller, click the button three times in one second.

5

Factory Reset Procedure

Press click Z-Wave button 3 times quickly, and hold for at least 10 seconds at the third time to restore the device to the factory (Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.)