Product Recognition | |
|---|
Certification Number | ZC14-25030508 |
|---|
Name | OUTDOOR DOUBLE PLUG |
|---|
Short Description | The Zooz Z-Wave Long Range Outdoor Double Plug (ZEN14) offers dual on/off control for two devices, featuring weatherproof IP65 housing, S2 security, and SmartStart inclusion. |
|---|
Long Description | PRODUCT HIGHLIGHTS:
- Z-Wave® on/off control of 2 individual loads
- IP65 rated for outdoor use
- NEW 800 series Z-Wave® chip for faster control
- S2 authenticated security and SmartStart
- Z-Wave Long Range ready for ultra reliable no-mesh communication (you need a LR enabled hub)
- ETL listed for compliance with North American safety standards
SPECIFICATIONS:
- Model Number: ZEN14 800LR
- Z-Wave® Region: US/CA/MX
- Power: 110 VAC, 60 Hz
- Maximum Load: 15 A, 150 W LED bulbs, 1000 W incandescent, 1/3 hp motor total between 2 outlets
- Range: Up to 150 |
|---|
Brand | Zooz |
|---|
Product Identifier | ZEN14 800LR |
|---|
Product Line | Smart Plugs |
|---|
OEM Version | HW: 08 FW: 08.00 |
|---|
Hardware Platform | EFR32ZG23A |
|---|
Z-Wave Version | 7.19.3 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Binary Switch DT |
|---|
Role Type | ROLE_TYPE_END_NODE_ALWAYS_ON |
|---|
Manufacturer ID | 0x027A |
|---|
Product Type ID | 0x7000 |
|---|
Product ID | 0xB003 |
|---|
User Icon | 0x0700 |
|---|
Installer Icon | 0x0700 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz, US_LR: 912.00MHz, 920.00MHz |
|---|
Categories | On/Off Switches/Devices, Lighting Accessories |
|---|
Countries / Regions | Canada, Mexico, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_BASIC_V2 | Basic V2 | 0x20 | 2 | COMMAND_CLASS_SWITCH_BINARY_V2 | Binary Switch V2 | 0x25 | 2 | COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_MULTI_CHANNEL_V4 | Multi Channel V4 | 0x60 | 4 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 |
|
|---|
S2 Classes | S2_AUTHENTICATED, S2_UNAUTHENTICATED |
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Features | Feature | Values |
|---|
Color | | Electric Load Type | Value |
|---|
Incandescent | LED | Inductive (e.g. Motor) |
| Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
| Loads Controlled | | Outdoor Use | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 | 2 | 5 | 0 | Basic Set Group 1 | 0x2001 | 3 | 5 | 0 | Basic Set Group 2 | 0x2002 | 1 | 0 | 1 | Lifeline | 0x0001 | 2 | 5 | 1 | Basic Set Group 1 | 0x2001 | 1 | 0 | 2 | Lifeline | 0x0001 | 2 | 5 | 2 | Basic Set Group 2 | 0x2002 |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value |
|---|
1 | Reaction of led | Change the reaction of the indicator. | 1 | 1 | 0 | 0 | 0x00 | 2 | Auto Turn Off 1 | Minutes for EP1 to turn off automatically. | 1 | 4 | 0 | 0 | 0x00000000 | 3 | Auto Turn Off 2 | Minutes for EP2 to turn off automatically. | 1 | 4 | 0 | 0 | 0x00000000 | 4 | Auto Turn On 1 | Minutes for EP1 to turn on automatically. | 1 | 4 | 0 | 0 | 0x00000000 | 5 | Auto Turn On 2 | Minutes for EP2 to turn on automatically. | 1 | 4 | 0 | 0 | 0x00000000 | 6 | Status restore | Restore status after power failure. | 1 | 1 | 0 | 0 | 0x02 | 7 | Indicator brightness | Setting indicator's brightness. | 1 | 1 | 0 | 0 | 0x02 | 8 | Manual control output | Enable or disable output manually. | 1 | 1 | 0 | 0 | 0x01 |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the back of the plug to complete SmartStart inclusion. SmartStart enabled products can be added into a ZWave® network by scanning the Z-Wave® QR Code present on the product with a controller providing SmartStart inclusion. | 1 | Classic Inclusion | While the hub is looking for new devices, click the ZWave® button 3 times as quickly as possible. The LED indicator will start flashing blue to confirm inclusion mode and turn green for 2 seconds once inclusion is
completed. | 2 | Classic Exclusion | 1. Bring the plug within direct range of your Z-Wave® gateway (hub).
2. Put the Z-Wave® hub into exclusion mode (not sure how to do that? ask@getzooz.com).
3. Press and release the Z-Wave® button 3 times quickly.
4. Your hub will confirm exclusion and the plug will disappear from your controller's device list. | 5 | Factory Reset Procedure | When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the plug is powered, then click the Z-Wave® button twice and hold it the third time for 10 seconds. The LED indicator will flash green 3 times to confirm a successful reset. NOTE: All previously recorded activity and custom settings will be erased from the device’s memory. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
Radio Range Z-Wave LR (m) | 400 |
|---|
