Plug-Control2 – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC14-26040606

Name

Plug-Control2

Short Description

Plug-Control2 is a universal, Z-Wave Plus® compatible, remotely controlled outlet adapter. This device may be applied wherever you want to control electrical devices with up to 2750W load.

Description

Plug-Control2 is a universal, Z-Wave Plus® compatible, remotely controlled outlet adapter. This device may be applied wherever you want to control electrical devices with up to 2750W load. Plug-Control2 is equipped with a power and energy metering function. It uses a LED ring to visualize the current load with colour changing illumination and operating mode. This is the smallest and most attractive device of this type available in the world. Plug-Control2 may be operated using the B-button located on its casing or via any Z-Wave® compatible hub.

Brand

Nice

Brand Owner

Nice

Identifier

FGWP-103

Product Line

Plug-Control2

OEM Version

HW: 03 FW: 08.00

Hardware Platform

EFR32ZG23B

Z-Wave Version

7.24.2

Library Type

END_NODE_ENHANCED_232

Device Type

Binary Switch DT

Role Type

ROLE_TYPE_END_NODE_ALWAYS_ON

Manufacturer ID

0x010F

Product Type ID

0x0603

Product ID

0x1000

User Icon

0x0700

Installer Icon

0x0700

Radio Range Z-Wave (m)

Frequency Plans

EU: 869.85MHz, 868.40MHz

Categories

Energy Meters, On/Off Switches/Devices

Countries / Regions

European Union

Supported Command Classes

S2 Classes

S2_AUTHENTICATED, S2_UNAUTHENTICATED

Documents

Association Groups

Configuration Parameters

Texts

ID	Description	Value
8	Where to find S2 DSK on product	If you’re adding the device in the Security S2 Authenticated mode, input the PIN Code labelled on the device. The PIN Code is also an underlined part of the device specific key (DSK) labelled at the bottom of the box.
1	Classic Inclusion	1. Plug the device into a socket nearby the main Z-Wave hub. 2. Set the main hub to add mode (secure or non-secure). For more information, see the hub manual. 3. Quickly press the B-button, three times. 4. If you’re adding the device in the Security S2 Authenticated mode, input the PIN Code labelled on the device. The PIN Code is also an underlined part of the device specific key (DSK) labelled at the bottom of the box. 5. Wait for the adding process to finish. 6. Successful adding is confirmed by the Z-Wave hub message and the device LED indicator: » Green - successful (non-secure, S0, S2 non-authenticated mode). » Magenta - successful (Security S2 Authenticated mode). » Red - not successful.
2	Classic Exclusion	To remove the device from the Z-Wave network: 1. Place Plug-Control2 within the direct range of your Z-Wave hub. 2. Identify the B-button switch. 3. Set the main hub in remove mode (see the hub’s manual). 4. Quickly, three times press the B-button switch. 5. Wait for the removing process to end. 6. Successful removing will be confirmed by the Z-Wave hub’s message.
5	Factory Reset Procedure	1. Make sure the device is powered. 2. Press and hold the B-button. 3. Wait for the LED ring to glow yellow (4th menu position). 4. Release the B-button. 5. Click the B-button once to confirm selection. 6. After few seconds the device will restart with factory settings, which is signalled with the red ring colour. Note. Resetting the device is not the recommended way of removing the device from the Z-Wave network. Use reset procedure only if the primary hub is missing or inoperable. Certain device removal can be achieved by the procedure of removing described in chapter “5. Removing the device”.

Supported / Controlled Meter Types

Supported Notification Types

Supports NWI

Yes

Supports Explorer Frames

Yes

Supports SmartStart

Yes