Product Recognition
Certification Number	ZC10-15095001
Name	Plug-in Dual Smart Dimmer With 3.4A USB Charging
Short Description	Transform any home into a smart home with the Jasco Z-Wave Plug-in Dual Smart Dimmer With 3.4A USB Charging. This module enable wireless control on on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more!
Long Description	Transform any home into a smart home with the Jasco Z-Wave Plug-in Dual Smart Dimmer With 3.4A USB Charging. This module enable wireless control on on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more! Use the dimmer control to customize the lighting output and create the perfect ambiance for any room. The space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet or obstructing placement of furniture. This module also enables you to have independent or simultaneous control of each outlet! Take control of your home lighting with Jasco Z-Wave Smart Lighting Controls!
Brand	Jasco Products Company
Product Identifier	28174
OEM Version	5.2
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ENHANCED_232
Device Type	Light Dimmer Switch
Manufacturer ID	0x0063
Product Type ID	0x5044
Product ID	0x3131
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	All Lighting Devices, Dimming Lighting Devices
Countries / Regions	United States of America
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual 28174-1 QSG.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 1 0 Z-Wave Plus Lifeline
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 11 When receiving an all on or all off command To adjust all command speed 0 1 0 0 1 From To Description 1 99 To adjust all command speed 0 0 3 LED Light When shipped from the factory, the LED is set to turn ON when the connected light is turned OFF. This is the default setting and can be changed if your primary controller supports the node configuration function. To make the LED turn ON when the light is turned ON, change parameter 3’s value to “1”. To turn the LED OFF at all times, change parameter 3’s value to 2. 0 1 0 0 0 From To Description 1 1 LED light on when on 2 2 LED Light off at all times 7 Endpoint 1 when receiving a dim command Number of steps or levels 0 1 0 0 1 From To Description 1 99 number of steps or levels 0 0 8 Endpoint 1 when receiving a dim command Timing of steps 0 2 0 0 3 From To Description 1 255 Timing of steps 0 0 9 End point 2 when receiving a dim command number of steps or levels 0 1 0 0 1 From To Description 1 99 number of steps or levels 0 0 10 Endpoint 2 when receiving a dim command Timing of steps 0 2 0 0 3 From To Description 1 255 timing of steps 0 0
Texts	ID Description Value 2 Exclusion To exclude and reset the device: 1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network. 2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart dimmer to exclude it from the network. 1 Inclusion Adding your device to a Z-wave network: 1. Follow the instructions for your Z-wave certified controller to include the smart dimmer to the Z-wave network. 2. Once the controller is ready to include your smart dimmer, single press and release the manual/program button on the smart dimmer to include it in the network. 3. Once your controller has confirmed that the smart dimmer has been included, refresh the Z-wave network to optimize performance. Please reference the controller/gateway’s manual for instructions. Now you have complete control to turn your lamp ON/OFF or set Dim levels according to groups, scenes, schedules and interactive automations programmed by your controller. If your Z-wave certified controller features Remote Access, you can now control your lighting from your mobile devices 5 Factory Reset To return your dimmer to factory defaults: 1. If plugged in, unplug the Dimmer from the receptacle. 2. Press and hold the top button for at least 3 seconds while you plug the dimmer into a receptacle. Note: This should only be used in the event your network’s primary controller is missing or otherwise inoperable.
Supports NWI	Yes
Supports Explorer Frames	Yes