Product Recognition | |
|---|
Certification Number | ZC10-18126336 |
|---|
Name | Plug-In Module - ON/OFF |
|---|
Short Description | Eaton’s Z-Wave Plus On/OFF Plug-in module to provide local and remote wireless ON/OFF control of a single outlet while leaving the other outlet always ON. |
|---|
Long Description | Eaton’s Z-Wave Plus Wireless ON/OFF Plug-in module can be used to provide local and remote wireless ON/OFF control of a single outlet. Controlled outlet can be manually and remotely controlled by commands sent from your compatible Z-Wave certified controller leaving the other outlet always ON.
• Provides wireless control of one outlet leaving the other outlet always ON
• Rated for up to 12A plug loads and up to 300W of LEDs
• Can be associated with up to 4 other devices
• Supports Z-Wave Plus functionality with S2 security certification
• Voice and app based control when used with compatible Z-Wave controller or Eaton’s home automation hub |
|---|
Brand | Eaton |
|---|
Product Identifier | RF96APM |
|---|
OEM Version | HW: 1 FW: 1.01:00.01 |
|---|
Hardware Platform | SD3502 |
|---|
Z-Wave Version | 6.71.01 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | On/Off Power Switch |
|---|
Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
Manufacturer ID | 0x001A |
|---|
Product Type ID | 0x0053 |
|---|
Product ID | 0x0050 |
|---|
User Icon | 0x0701 |
|---|
Installer Icon | 0x0701 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | All Lighting Devices, On/Off Switches/Devices, Motor Control |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4 | Firmware Update Meta-Data V4 | 0x7A | 4 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_SWITCH_ALL | Switch All | 0x27 | 1 | COMMAND_CLASS_SWITCH_BINARY | Switch Binary | 0x25 | 1 | COMMAND_CLASS_BASIC | Basic | 0x20 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_SECURITY | Security S0 | 0x98 | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_SECURITY_2 | Security S2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_NOTIFICATION_V4 | Notification V4 | 0x71 | 4 |
|
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_BASIC | Basic | 0x20 | 1 |
|
|---|
S2 Classes | S2_UNAUTHENTICATED, S2_AUTHENTICATED |
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Z-Wave Scene Type | | Color | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
| Switch Load Capacity Watts | | Loads Controlled | | Supported Notification Types | | Electric Load Type | Value |
|---|
Incandescent | Fluorescent | MLV (Magnetic) | ELV (Electronic) | LED | Inductive (e.g. Motor) |
| Switch Load Capacity Current | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 4 | 0 | Z-Wave Plus Lifeline
| 2 | 4 | 0 | Basic Set
When the button on the unit is pressed, the unit will send a Basic Set command to the nodes of Group 2. When the unit is OFF, Basic Set Value = 0x00. When the unit is ON, Basic Set Value = 0xFF |
|
|---|
Configuration Parameters | |
|---|
Texts | ID | Description | Value |
|---|
1 | Inclusion | This ON/OFF plug supports Auto Inclusion feature where it will automatically enter Inclusion mode when first powered up after a factory reset.
1. There is an ON/OFF button on the front of the device which is used to carry out inclusion, exclusion or association.
2. Put your Z-Wave Controller into inclusion/exclusion mode.
3. Plug this ON/OFF Plug-in module into a wall outlet near the load to be controlled.
4. The Inclusion process should be completed when the LED stops blinking.
Note: If Auto Inclusion fails, refer to the Troubleshooting section regarding Manual Inclusion
If auto inclusion fails:
1. Put the Z-Wave Controller into Inclusion mode
2. Press the ON/OFF button 3 times within
1.5 seconds to put the unit into Inclusion mode | 2 | Exclusion | 1. Put the Z-Wave Controller into Exclusion mode
2. Press the ON/OFF button 3 times within
1.5 seconds to put the unit into Exclusion mode | 5 | Factory Reset | Please use this procedure only when the network primary controller is missing or otherwise inoperable
1. Press the ON/OFF button 3 times within
1.5 seconds to put the unit into exclusion mode
2. Within 1 second of step 1, press and hold the
button for 5 seconds
3. Node ID is deleted. The device reverts to factory
default state |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Appliance | (Refer to parameters): State idle |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
