Product Recognition | |
|---|
Certification Number | ZC10-16055062 |
|---|
Name | PLUG-IN SMART METER APPLIANCE MODULE |
|---|
Short Description | ZWN-333M IS A PLUG-IN SMART METER ON/OFF SWITCH, ABLE TO MEASURE THE USAGE. |
|---|
Long Description | This ZWN-333M Smart Meter Appliance Module is a Z-Wave enabled device and fully interoperable with other Z-Wave certified device from other manufacturers and/or other applications, which can report wattage energy usage or kWh energy usage to a Z-Wave gateway. In a Z-Wave network, ZWN-333M can be controlled to turn on/off to save energy, also act as a wireless repeater regardless of vendor to increase reliability of the network. With a horizontal design, the Smart Meter Appliance Module will not block other nearby AC outlets. |
|---|
Brand | Enerwave Green Automation |
|---|
Product Identifier | ZWN-333M |
|---|
OEM Version | HW: 1 FW: 5.10 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.51.07 |
|---|
Library Type | SLAVE_ROUTING |
|---|
Device Type | On/Off Power Switch |
|---|
Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
Manufacturer ID | 0x011A |
|---|
Product Type ID | 0x0111 |
|---|
Product ID | 0x0101 |
|---|
User Icon | 0x0700 |
|---|
Installer Icon | 0x0700 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | Energy Meters, All Lighting Devices, On/Off Switches/Devices |
|---|
Countries / Regions | United States of America |
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Supported Meter Type | | Switch Type | Value |
|---|
Push Button with Indicator |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
3 | 5 | 0 | PowerReport: Send meter power report | 1 | 1 | 0 | Z-Wave Plus Lifeline: Send device reset locally notification | 2 | 5 | 0 | StatusReport: Send basic report |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
1 | LEDdirect | synchronization of load power and LED indicator. 0: Power on, LED off 1: Power on, LED on | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
1 | 1 | Power on, LED on | 0 | 0 | Power on, LED off |
|
|
|---|
Texts | ID | Description | Value |
|---|
1 | Inclusion | Once program button is pressed and hold for 3 second, the device will enter into
learn mode to accomplish adding or removing by controller. Refer to the instruction
for your primary controller to access the setup function and add or remove devices. | 2 | Exclusion | Once program button is pressed and hold for 3 second, the device will enter into
learn mode to accomplish adding or removing by controller. Refer to the instruction
for your primary controller to access the setup function and add or remove devices. | 5 | Factory Reset | Once program button is pressed and hold for 10 second, the device will send a device reset locally notification to controller. Then clear all of information for the network, and restore factory defaults, and reset the module. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable. |
|
|---|
Supported / Controlled Meter Types | Meter Type | Rate Type | Description |
|---|
Electric meter | Import | Electric Meter Consumption |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
