Product Recognition
Certification Number	ZC10-17015398
Name	Qubino Flush RGBW Dimmer
Short Description	Qubino Flush RGBW Dimmer
Long Description	Qubino Flush RGBW module is used to control RGB/RGBW strips and LED strips or bulbs to create countless colour options and has 5 special scene effects. It can also control halogen lights and fans. Its extremely small size allows for easy installation behind wall sockets and switches. Controlled devices may be powered by 12 or 24 VDC. All IN and OUT terminals may be user configured for LED control or 100 kΩ signal readouts.
Brand	QUBINO
Product Identifier	ZMNHWD1
OEM Version	HW: 255 FW: 2.07
Hardware Platform	ZM5101
Z-Wave Version	6.51.06
Library Type	SLAVE_ENHANCED_232
Device Type	Light Dimmer Switch
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x0159
Product Type ID	0x0001
Product ID	0x0054
User Icon	0x0600
Installer Icon	0x0600
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	All Lighting Devices, Dimming Lighting Devices
Countries / Regions	European Union
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_SWITCH_BINARY Switch Binary 0x25 1 COMMAND_CLASS_BASIC Basic 0x20 1 COMMAND_CLASS_CONFIGURATION Configuration 0x70 1 COMMAND_CLASS_SWITCH_MULTILEVEL_V2 Switch Multilevel V2 0x26 2 COMMAND_CLASS_VERSION_V2 Version V2 0x86 2 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO Association Group Info 0x59 1 COMMAND_CLASS_SWITCH_COLOR_V2 Switch Color V2 0x33 2 COMMAND_CLASS_MANUFACTURER_SPECIFIC Manufacturer Specific 0x72 1 COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2 Firmware Update Meta-Data V2 0x7A 2
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual Qubino_Flush RGBW Dimmer PLUS extended manual_eng_2.2.pdf
Features	Feature Values Neutral Wire Required Firmware Updatable Value Updatable by Consumer by RF
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Z-Wave Plus Lifeline
Configuration Parameters	Parameter Number Name Description Format Flag Advanced Size Min Value Max Value Default Value Parameter Values 1 Input switch type *.default value 1 *. 1-bi-stable switch type *. 2-mono stable(Push button)switch type 0 Yes 1 1 2 1 From To Description 1 2 switch type 2 Switch mode *.default value 1 *. 1-Normal Mode *. 2-Brightness Mode *. 3-Rainbow Mode 0 Yes 1 1 3 1 From To Description 1 3 Switch mode 3 Auto Scene Mode set *.default value 1-Ocean 2-lightning 3-Rainbow Mode 4-Snow 5-Sun 0 Yes 1 1 5 1 From To Description 1 5 Auto Scene Mode set 4 Auto scene duration * default value 3 * 1-127 delay duration is from 1s to 127s * -128~-1 delay duration is from 1 min. to 127min. 0 Yes 1 -128 127 3 From To Description 1 127 duration is from 1s to 127s -128 -1 duration is from 1 min. to 127min.
Texts	ID Description Value 1 Inclusion Include the R.G.B.W. color LED Dimmer intor the Z-Wave network, press service button 3 times in 2 seconds.If the device is properly include the green light will remains on. 2 Exclusion Exclude the Flush RGBW Dimmer into Z-Wave network, press 3 times in 2 seconds.If the device is proporly excluded, the green light will blink and data will bereset to the factory default values. 5 Factory Reset Please note that re-including the proudct will reset the data to the default values. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
Supports NWI	Yes
Supports Explorer Frames	Yes