Product Recognition
Certification Number	ZC10-14110010
Name	Remote
Short Description	The Remote PSR03 is a simple control can control AV device through Z-Wave-to-IR extender, and it can also controls 8 lighting groups ON/OFF via basic set, based on Z-Wave™ technology.
Long Description	The Remote PSR03 is a simple control can control AV device through Z-Wave-to-IR extender, and it can also controls 8 lighting groups ON/OFF via basic set, based on Z-Wave™ technology. It is a Z-Wave™ plus product, it supports the security, OTA... Those newest features of the Z-Wave™ technology. Z-Wave™ is a wireless communication protocol designed for home automation, specifically to remotely control applications in residential and light commercial environments. The technology uses a low-power RF radio embedded or retrofitted into home electronics devices and systems, such as lighting, home access control, entertainment systems and household appliances.
Brand	Philio
Product Identifier	PSR03
OEM Version	01
Hardware Platform	SD3502
Z-Wave Version	6.51.02
Library Type	SLAVE_ENHANCED_232_NOFLIRS_NOMR
Device Type	Remote Control - AV
Role Type	ROLE_TYPE_SLAVE_PORTABLE
Manufacturer ID	0x013C
Product Type ID	0x0008
Product ID	0x001D
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	All Controllers, Handheld Controller
Countries / Regions	European Union
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_BASIC Basic 0x20 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual PSR03_Manual.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 4 0 Z-Wave Plus Lifeline 8 4 0 Lighting group 7 9 4 0 Lighting group 8 2 4 0 Lighting group 1 3 4 0 Lighting group 2 4 4 0 Lighting group 3 5 4 0 Lighting group 4 6 4 0 Lighting group 5 7 4 0 Lighting group 6
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 82 Association Group 2 Basic Set Level Setting the BASIC command value to turn on the light in the association group 2. 0 means using the value of configuration 2 to set. 0 1 0 0 0 From To Description 0 0 Use the value set by configuration parameter 2. -1 -1 BASIC Command On (0xFF) 1 99 Setting the BASIC command value to turn on the light in the association group 2. 83 Association Group 3 Basic Set Level Setting the BASIC command value to turn on the light in the association group 3. 0 means using the value of configuration 2 to set. 0 1 0 0 0 From To Description 0 0 Use the value set by configuration parameter 2. -1 -1 BASIC Command On (0xFF) 1 99 Setting the BASIC command value to turn on the light in the association group 3. 84 Association Group 4 Basic Set Level Setting the BASIC command value to turn on the light in the association group 4. 0 means using the value of configuration 2 to set. 0 1 0 0 0 From To Description 0 0 Use the value set by configuration parameter 2. -1 -1 BASIC Command On (0xFF) 1 99 Setting the BASIC command value to turn on the light in the association group 4. 85 Association Group 5 Basic Set Level Setting the BASIC command value to turn on the light in the association group 5. 0 means using the value of configuration 2 to set. 0 1 0 0 0 From To Description 0 0 Use the value set by configuration parameter 2. -1 -1 BASIC Command On (0xFF) 1 99 Setting the BASIC command value to turn on the light in the association group 5. 86 Association Group 6 Basic Set Level Setting the BASIC command value to turn on the light in the association group 6. 0 means using the value of configuration 2 to set. 0 1 0 0 0 From To Description 0 0 Use the value set by configuration parameter 2. -1 -1 BASIC Command On (0xFF) 1 99 Setting the BASIC command value to turn on the light in the association group 6. 87 Association Group 7 Basic Set Level Setting the BASIC command value to turn on the light in the association group 7. 0 means using the value of configuration 2 to set. 0 1 0 0 0 From To Description 0 0 Use the value set by configuration parameter 2. -1 -1 BASIC Command On (0xFF) 1 99 Setting the BASIC command value to turn on the light in the association group 7. 88 Association Group 8 Basic Set Level Setting the BASIC command value to turn on the light in the association group 8. 0 means using the value of configuration 2 to set. 0 1 0 0 0 From To Description 0 0 Use the value set by configuration parameter 2. -1 -1 BASIC Command On (0xFF) 1 99 Setting the BASIC command value to turn on the light in the association group 8. 7 Customer Function Customer function switch, using bit control. Bit0: Switch AV control/Lighting group control. (0: AV control, 1: lighting group control) 0 1 0 0 0 From To Description 0 0 AV Control 1 1 Lighting Group Control 2 Basic Set Level Setting the BASIC command value to turn on the light. The 0xFF(-1) means turn on the light. For dimmer equipment 1 to 100 means the light strength. 0 means turn off the light. 0 1 0 0 -1 From To Description 1 99 Set the light to level 1-99, 99 is full brightness -1 -1 -1 (0xFF) means turn the light on 0 0 Turn off the light 89 Association Group 9 Basic Set Level Setting the BASIC command value to turn on the light in the association group 9. 0 means using the value of configuration 2 to set. 0 1 0 0 0 From To Description 0 0 Use the value set by configuration parameter 2. -1 -1 BASIC Command On (0xFF) 1 99 Setting the BASIC command value to turn on the light in the association group 9.
Texts	ID Description Value 5 Factory Reset Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable. 1. Hold down the central key, then press the top-right key four times within 1.5 seconds and do not release the top-right key in the 4 th pressed, and the LED will light ON. 2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the keys. If successful, the LED will light ON one second. Otherwise, the LED will flash once. 3. IDs are remove and all settings will reset to factory default. 23 Controller Inclusion 1. Have Z-Wave TM Controller entered add mode. 2. Hold down the central key, then press the top-right key three times within 1.5 seconds to enter the add mode. 3. After add successful, the device will wake to receive the setting command from Z-Wave ™ Controller about 20 seconds. 24 Controller Exclusion 1. Have Z-Wave ™ Controller entered remove mode. 2. Hold down the central key, then press the top-right key three times within 1.5 seconds to enter the remove mode. Node ID has been excluded. 4 Device Wake-Up After the device adding to the network, it will wake-up once per day in default. When it wake-up it will broadcast the “Wake Up Notification” message to the network, and wake-up 10 seconds for receive the setting commands. The wake-up interval minimum setting is 30 minutes, and maximum setting is 120 hours. And the interval step is 30 minutes. If the user want to wake-up the device immediately, please press the button once. The device will wake-up 10 seconds.
Supports NWI	Yes
Supports Explorer Frames	Yes