Product Recognition | |
|---|
Certification Number | ZC10-25070011 |
|---|
Name | RGBW-Control |
|---|
Short Description | Universal remote control for RGB/RGBW and other LEDs. |
|---|
Description | RGBW-Control is an universal, Z-Wave Plus compatible RGB/RGBW controller.
RGBW-Control uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads.
It can also measure active power and energy consumed by the load. Controlled devices may be powered by 12 or 24V DC.
Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc. |
|---|
Brand | Nice |
|---|
Brand Owner | Nice |
|---|
Identifier | FGRGBW-442 |
|---|
Product Line | Nice RGBW-Control |
|---|
OEM Version | HW: 02 FW: 05.01:05.01:01.00 |
|---|
Hardware Platform | ZM5101A-CME3 |
|---|
Z-Wave Version | 6.81.03 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Multilevel Switch - Color Tunable Multilevel |
|---|
Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
Manufacturer ID | 0x010F |
|---|
Product Type ID | 0x0902 |
|---|
Product ID | 0x2000 |
|---|
User Icon | 0x0600 |
|---|
Installer Icon | 0x0600 |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | On/Off Switches/Devices, Dimming Lighting Devices |
|---|
Countries / Regions | Canada, Mexico, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_CENTRAL_SCENE_V3 | Central Scene V3 | 0x5B | 3 | COMMAND_CLASS_SWITCH_COLOR_V3 | Color Switch V3 | 0x33 | 3 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_METER_V3 | Meter V3 | 0x32 | 3 | COMMAND_CLASS_SENSOR_MULTILEVEL_V11 | Multilevel Sensor V11 | 0x31 | 11 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_PROTECTION_V2 | Protection V2 | 0x75 | 2 | COMMAND_CLASS_APPLICATION_STATUS | Application Status | 0x22 | 1 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 | Association Group Information (AGI) V2 | 0x59 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4 | Firmware Update Meta Data V4 | 0x7A | 4 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_CRC_16_ENCAP | CRC-16 Encapsulation | 0x56 | 1 | COMMAND_CLASS_MULTI_CHANNEL_V4 | Multi Channel V4 | 0x60 | 4 | COMMAND_CLASS_SECURITY | Security 0 | 0x98 | 1 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 |
|
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_SWITCH_COLOR_V3 | Color Switch V3 | 0x33 | 3 |
|
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | In chapter 5.1:
4. If you are adding in Security S2 Authenticated, input the underlined part of the DSK, which is labelled on the box. | 1 | Classic Inclusion | To add the device to the Z-Wave network manually:
1. Power the device.
2. Set the main hub in the (Security/non-Security Mode) add mode. For more information, see the hub manual.
3. Quickly, three times click the service button.
4. If you are adding in Security S2 Authenticated, input the underlined part of the DSK, which is labelled on the box.
5. LED starts blinking yellow, wait for the adding process to end.
6. Adding result is confirmed with the Z-Wave hub message and the LED color:
• Green – successful (non-secure, S0, S2 Unauthenticated)
• Magenta – successful (Security S2 Authenticated)
• Red – not successful | 2 | Classic Exclusion | To remove the device from the Z-Wave network:
1. Power the device.
2. Set the main hub into the remove mode. For more information, see the hub manual.
3. Quickly, three times click the service button.
4. LED starts blinking yellow, wait for the removing process to end.
Successful removing is confirmed with the Z-Wave hub message and red LED color. | 5 | Factory Reset Procedure | Reset procedure enables you to restore the device back to its factory settings, which means all information about the Z-Wave hub and user configuration are deleted. Resetting to factory defaults doesn't reset energy consumption memory.
1. Press and hold the service button to enter the menu.
2. Release service button when the device glows yellow.
3. Quickly click the service button to confirm.4. After a few seconds the device is restarted, which is signalled with the red color. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
