Product Recognition | |
|---|
Certification Number | ZC10-19016343 |
|---|
Name | Ring Smoke/CO Listener |
|---|
Short Description | Ring Smoke/CO Listener is a smart sound sensor for Ring Alarm. This sensor listens for the alarm sound of a smoke and/or CO detector. |
|---|
Long Description | Ring Smoke/CO Listener is a smart sound sensor for Ring Alarm. This sensor listens for the alarm sound of a smoke and/or CO detector. It does not sense smoke or CO directly. Instead, it adds smart functionality to your existing smoke or CO alarm (or smoke/CO combo).
When your smoke or CO alarm begins to sound, the Smoke/CO Listener activates and Ring Alarm notifies you of the issue, wherever you are. If your system is professionally monitored, our monitoring center is also notified. |
|---|
Brand | Ring |
|---|
Product Identifier | 4SS1S80EN0 |
|---|
OEM Version | HW: 1 FW: 10.01 |
|---|
Hardware Platform | ZM5101 |
|---|
Z-Wave Version | 6.81.00 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | Notification Sensor |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_REPORTING |
|---|
Manufacturer ID | 0x0346 |
|---|
Product Type ID | 0x0601 |
|---|
Product ID | 0x0101 |
|---|
User Icon | 0x0C01 |
|---|
Installer Icon | 0x0C01 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | Sensors |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4 | Firmware Update Meta-Data V4 | 0x7A | 4 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_SECURITY_2 | Security S2 | 0x9F | 1 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 |
|
|---|
S2 Classes | S2_UNAUTHENTICATED, S2_AUTHENTICATED |
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Color | | Battery Quantity | | Battery Type | | Firmware Updatable | Value |
|---|
Updatable by Consumer via Internet |
| Supported Notification Types | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 5 | 0 | Z-Wave Plus Lifeline |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
3 | Installation Test | 0: Cancel Installation Test Mode 1: Start Installation Test Mode | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
0 | 1 | 0: Cancel Installation Test Mode 1: Start Installation Test Mode |
| 2 | “hear” CO Detectors | 1: Smoke Detector Siren 2: Smoke+CO Detector Siren | 0 | 1 | 0 | 0 | 1 | From | To | Description |
|---|
1 | 2 | 1: Smoke Detector Siren 2: Smoke+CO Detector Siren |
| 1 | Unsolicited Battery Report | 255 to 4200 seconds in 255 second increments that the sensor should wait between sending unsolicited battery reports. | 0 | 2 | 0 | 0 | 4200 | From | To | Description |
|---|
255 | 4200 | 255 to 4200 seconds in 255 second increments that the sensor should wait between sending unsolicited battery reports. |
|
|
|---|
Texts | ID | Description | Value |
|---|
4 | Device Wake-Up | The sensor will wake up every so often and when the case is closed to send a Wake-Up Notification to allow the life line master node controller that the sensor is now available for any queued messages that the controller may have for the sensor. The time between Wake-Up Notifications can be configured with the Wake-Up Notification command class to be between 1 and 24 hours with interval steps of 1 minute. | 2 | Exclusion | Exclusion Instructions -
to remove Ring Smoke/CO Listener from your system:
Open the side menu in the Ring app and tap Devices, then Base Station. Next, select your Listener and tap the gear- shaped icon. Then tap Remove Device.
When prompted, open the Listener and remove and reinstall the battery to complete the removal. | 1 | Inclusion | Inclusion Instructions -
Begin the setup process near your Ring Alarm Base Station.
In the Ring app, tap Set Up a Device. Choose Security Devices, then Sensors,
then Ring Smoke/CO Listener, then tap Add Device.
To complete the setup process, follow the in-app instructions.
When prompted, scan the QR Code or enter the PIN.
This begins the pairing process. The QR Code and PIN are on the back of your Listener and in the product packaging.
When prompted, pull out the clear tab.
This turns the Listener on. Your Alarm Base Station then finds it automatically.
As the Listener pairs to your Alarm Base Station, its LED ring blinks slowly, then quickly. Once it pairs, the LED glows blue for three seconds. | 5 | Factory Reset | Reset Instructions -
To factory reset, press and hold the Setup button for 10 seconds. When the LED ring stops blinking, your Listener has reset.
This process disconnects the Listener from Ring Alarm. To begin using the Listener again, repeat the setup process in the Ring app.
Note: Please use this procedure only when the network primary controller is missing or otherwise inoperable. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Smoke Alarm | (Refer to parameters): State idle | CO Alarm | (Refer to parameters): State idle |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
