RisControl Smart Home Z-Wave Controller – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC14-25020502

Name

RisControl Smart Home Z-Wave Controller

Short Description

Long Description

RisControl is a high-resolution Smart Touchscreen Keypad with an intuitive, easy to navigate user interface. RisControl combines standard keypad functionality with the ability to operate RISCO’s Smart Home cloud-based solution, and alarm and video, from one customizable screen. The RisControl can be used in 3 operation modes, as follows: • Smart Home + Security –RisControl is connected to a control panel via the RS-485 bus. For Smart Home operation, RisControl is connected to other RisControl units and to the RISCO Cloud via Wi-Fi • Smart Home Only–RisControl is connected to other RisControl units (and to the RISCO Cloud) via Wi-Fi • Security Only- RisControl is connected to a control panel via the RS-485 bus and to the RISCO Cloud via Wi-Fi

Brand

RISCO Ltd.

Product Identifier

RisControlZW100

Product Line

RisControl

OEM Version

HW: 01 FW: 02.05:02.05

Hardware Platform

EFR32ZG23A

Z-Wave Version

7.22.1

Library Type

CONTROLLER_BRIDGE

Device Type

Gateway DT

Role Type

ROLE_TYPE_CONTROLLER_CENTRAL_STATIC

Manufacturer ID

0x035e

Product Type ID

0x0001

Product ID

0x0003

User Icon

0x0100

Installer Icon

0x0100

Frequency Plans

US: 916.00MHz, 908.40MHz

Categories

Gateway Controller, Security Systems

Countries / Regions

Argentina, Bahamas, Barbados, Bermuda, Bolivia, British Virgin Islands, Canada, Cayman Islands, Colombia, Guatemala, Haiti, Honduras, Jamaica, Mexico, Panama, Saint Kitts and Nevis, Suriname, Trinidad and Tobago, Turks and Caicos Islands, United States of America

Supported Command Classes

Controlled Command Classes

S2 Classes

S2_ACCESS_CONTROL, S2_AUTHENTICATED, S2_UNAUTHENTICATED

Documents

Features

Association Groups

Texts

ID	Description	Value
23	Controller Classic Inclusion	1.Click the RisControl Smart Home Sub Tab, then click the Smart Devices Side Tab and then click . Add Devoce , Select the option+ include Device 2.When the ADD NEW SMART DEVICE Side Panel opens, the Gateway enters the Inclusion Mode and waits for an Inclusion signal from the device to be added. 3.Manually enter the Smart Device into Inclusion Mode, according to the device’s Installation Instructions. Note: The Home Automation Gateway will wait for 2 minutes to receive an Inclusion signal from the new Z-Wave Smart Device before the timeout period elapses. During data collection (which takes between several seconds to several minutes to complete) the following Side Panel opens. 4.In the Device Name field that shortly opens, enter a name for the device that best describes its function and/or location and then click save.
24	Controller Classic Exclusion	To Delete a Z-Wave Device: 1.From the Sites List of the RISCO Cloud, click the SITE that you wish to enter 2.Click the SMART HOME Sub Tab, then click the SMART DEVICES Side Tab and click Remove device ; the REMOVE DEVICE pop-up window appears. 3.Activate the Exclude mode for the Smart Device that you want to exclude, according to the device’s Installation Instructions; after a short time, the device is removed.
10	Controller Replication	N/A
11	Controller SmartStart Inclusion	1.From the Smart Devices screen, click Add device and then click on+Smart Start option 2.The SMART START Side Panel opens; you can either scan the QR code or manually enter the DSK of a device you want to add. 3.When the device is found, type the Label and click the “Add” button to register the device. 4.Add all the devices for Inclusion to the provision list. 5.To add a device, click Add Another To start the Inclusion process, click on the “Start Inclusion” button and start powering up the devices that were added. A message indicating that Inclusion has started will be displayed. 6.Click the “Close” button to return to Smart Home main page. While Inclusion is in progress, a message that indicates smart start is displayed on SMART DEVICES Sub tab. 7.The Inclusion will automatically stop after a configured time. To stop the Inclusion process manually, click "Click here to stop" and then click on ”Yes, stop Inclusion” button to confirm the operation. Note: If the Inclusion is not in progress and there are registered devices for Inclusion, a message will be displayed on the SMART DEVICES Sub tab indicating the number of the devices waiting Inclusion. 8.To access the provision list or edit it, click on ."Click to view or to start inclusion."The SMART START Side Panel opens, displaying the registered devices To add a device, click Add another To remove a device, click Delete
25	Controller Provisioning List	To access the provision list or edit it, click on ."Click to view or to start inclusion."The SMART START Side Panel opens, displaying the registered devices To add a device, click Add another To remove a device, click Delete
5	Factory Reset Procedure	You can reset all the Z-Wave settings of the RisControl Smart Home Gateway. Note: This action will remove all the connected devices from the system. 1.Click the GATEWAY Side Tab. 2.Click on the Gateway; the EDIT GATEWAY Side Panel opens. 3.If you are sure you want to proceed with the reset, click Reset, otherwise, click Cancel.

Supports NWI

Yes

Supports Explorer Frames

Yes

Supports SmartStart

Yes

Radio Range Z-Wave (m)