Rocket Bulb – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC10-19016346

Name

Rocket Bulb

Short Description

The JLabs CCT bulb is based on Z-Wave protocol, realizing basic function of on/of/dim/tunable white. The CCT Retrofit produces beautiful high quality light that you can tune, dim, and control from your smartphone or tablet

Long Description

1. Standard form factor and appearance of the light bulb with 806 lm output 2. Tunable white: dimmable from 5% to 100%, tunable from 2700K to 6500K. 3. Possible to be included in groups, scenes, or schedules 4Suitable for indoor lighting: Corridors, Bedroom, Living Room, etc. 5. Voltage: 100V

Brand

RouteZ

Product Identifier

JZB01CCT

OEM Version

HW: 1 FW: 2.07

Hardware Platform

ZM5101

Z-Wave Version

6.81.03

Library Type

SLAVE_ENHANCED_232

Device Type

Light Dimmer Switch

Role Type

ROLE_TYPE_SLAVE_ALWAYS_ON

Manufacturer ID

0x039F

Product Type ID

0x060A

Product ID

0x0021

User Icon

0x0600

Installer Icon

0x0600

Frequency Plans

JP: 922.50MHz, 923.90MHz, 926.30MHz

Categories

All Lighting Devices, Dimming Lighting Devices

Countries / Regions

Japan

Supported Command Classes

S2 Classes

S2_UNAUTHENTICATED

Documents

Features

Association Groups

Configuration Parameters

Texts

ID	Description	Value
1	Inclusion	SmartStart Inclusion:(Trigger:OFF-->ON) 1. The LED light will flash twice (first time 6500K, second time 2700K), and send node info frame. 2. Add for inclusion(SmartStart Inclusion): (If your controller does not support SmartStart inclusion, please refer to the manual for your controller for non-SmartStart inclusion.) Add the led bulb DSK into the primary controller SmartStart Provisioning List (If you don’t know how to do this, refer to its manual). a) Power cycle once for led bulb. b) The led bulb will send “Explorer Auto inclusion” frame to start SmartStart Inclusion. c) Wait a moment, the led bulb should be added to the controller.Then the led bulb will flash once(2700K) when it has been included into the network. Note: The led bulb will start SmartStart Inclusion when it is removed from a Z-Wave network. Normal Inclusion:(Trigger:OFF-->ON-->OFF-->ON-->OFF-->ON) 1. The LED light will flash twice, and send node info frame. 2. Add for inclusion(Normal Inclusion): a) Set the Z-Wave network main controller into learning mode. b) Power cycle once for led bulb. c) Wait a moment, the led bulb should be added to the controller.Then the led bulb will flash once when it has been included into the network.
2	Exclusion	Trigger:OFF-->ON-->OFF-->ON-->OFF-->ON 1. LED Bulb will light up with previously saved state and send node info frame. 2. Remove for exclusion: a) Assuming led bulb was added to controller and was power on. b) Set the Z-Wave network main controller into removing mode. c) Power cycle triple for led bulb (OFF->ON->OFF->ON->OFF->ON). d) Wait a moment, the led bulb should be removed from the controller.Then the led bulb will flash once and dim to 5%.
5	Factory Reset	Reset the device : Trigger:OFF-->ON-->OFF-->ON-->OFF-->ON-->OFF-->ON-->OFF-->ON-->OFF-->ON Led bulb re-power 6 times (between 0.5-2 seconds each time); If the 6th power on, the led bulb flashes twice (first time 6500K, second time 2700K), which means that the resetting is successful. it will send “Device Reset Locally Command”. Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Supports NWI

Yes

Supports Explorer Frames

Yes

Supports SmartStart

Yes

Radio Range Z-Wave (m)