Product Recognition | |
|---|
Certification Number | ZC14-24020398 |
|---|
Name | S2 Double Switch |
|---|
Short Description | The 800 Series Z-Wave™ Long Range version of the Zooz Double Switch, a perfect replacement for your stacked wall switch. |
|---|
Long Description | FEATURES:
- Manual or Z-Wave™ control of 2 separate loads (dimmer + relay)
- Perfect replacement for a fan / light combo (neutral wire required)
- Scene control for multi-tap scenarios on select hubs
- Quick and easy pigtail wire installation (single pole only)
- 4-color LED indicator and air-gap switch for added safety
- NEW: 800 Z-Wave™ chip with SmartStart S2 authenticated security
- Packed with advanced dimming features including ramp rate control, custom on brightness level, and double tap to full brightness
- Remembers and restores on/off status after power failure
- Z-Wave™ Long Range for ultra reliable no-mesh communication
SPECIFICATIONS:
- Model Number: ZEN30 800LR
- Z-Wave™ Region: US/MX/CA
- Power: 120 VAC, 60 Hz
- Dimmer Max Load: 75 W LED, 250 W incandescent; DON’T use with tube lights, DC powered fixtures, or chandeliers
- Relay Max Load: 15 A (1/2 HP)
- Operating Temperature: 32-104° F (0-40° C)
- Installation and Use: Indoor only |
|---|
Brand | Zooz |
|---|
Product Identifier | ZEN30 800LR |
|---|
Product Line | Light Switches |
|---|
OEM Version | HW: 04 FW: 04.10 |
|---|
Hardware Platform | EFR32ZG23A |
|---|
Z-Wave Version | 7.19.3 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Multilevel Switch DT |
|---|
Role Type | ROLE_TYPE_END_NODE_ALWAYS_ON |
|---|
Manufacturer ID | 0x027A |
|---|
Product Type ID | 0xA000 |
|---|
Product ID | 0xA008 |
|---|
User Icon | 0x0604 |
|---|
Installer Icon | 0x0600 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz, US_LR: 912.00MHz, 920.00MHz |
|---|
Categories | On/Off Switches/Devices, Dimming Lighting Devices |
|---|
Countries / Regions | Canada, Mexico, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_SWITCH_MULTILEVEL_V4 | Multilevel Switch V4 | 0x26 | 4 | COMMAND_CLASS_BASIC_V2 | Basic V2 | 0x20 | 2 | COMMAND_CLASS_MULTI_CHANNEL_V4 | Multi Channel V4 | 0x60 | 4 | COMMAND_CLASS_SWITCH_BINARY_V2 | Binary Switch V2 | 0x25 | 2 | COMMAND_CLASS_CENTRAL_SCENE_V3 | Central Scene V3 | 0x5B | 3 | COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 |
|
|---|
S2 Classes | S2_AUTHENTICATED, S2_UNAUTHENTICATED |
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Features | Feature | Values |
|---|
Color | | Electric Load Type | Value |
|---|
Incandescent | LED | Dimmable LED | Inductive (e.g. Motor) |
| Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
| Loads Controlled | | Neutral Wire Required | | Z-Wave Scene Type | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 | 2 | 5 | 0 | Dimmer Basic Set Group | 0x2001 | 3 | 5 | 0 | MULTILEVEL SET Group | 0x2001 | 4 | 5 | 0 | Relay Basic Set Group | 0x2002 | 1 | 0 | 1 | Lifeline | 0x0001 | 2 | 5 | 1 | Dimmer Basic Set Group | 0x2001 | 3 | 5 | 1 | MULTILEVEL SET Group | 0x2001 | 1 | 0 | 2 | Lifeline | 0x0001 | 2 | 5 | 2 | Relay Basic Set Group | 0x2002 |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value |
|---|
1 | IndicatorDimmerMode | Led indicator mode for dimmer. | 1 | 1 | 0 | 0 | 0x00 | 2 | IndicatorRelayMode | Led indicator mode for relay. | 1 | 1 | 0 | 0 | 0x00 | 3 | IndicatorDimmerColor | Led indicator color for dimmer. | 1 | 1 | 0 | 0 | 0x00 | 4 | IndicatorRelayColor | Led indicator color for relay. | 1 | 1 | 0 | 0 | 0x00 | 5 | IndicatorDimmerBrightness | Led indicator brightness for dimmer. | 1 | 1 | 0 | 0 | 0x01 | 6 | IndicatorRelayBrightness | Led indicator brightness for relay. | 1 | 1 | 0 | 0 | 0x01 | 7 | IndicatorSceneMode | Led indicator mode for scene. | 1 | 1 | 0 | 0 | 0x01 | 8 | DimmerAutoTurnOffTimer | Auto turn off timer for dimmer. | 1 | 4 | 0 | 0 | 0x00000000 | 9 | DimmerAutoTurnOnTimer | Auto turn on timer for dimmer. | 1 | 4 | 0 | 0 | 0x00000000 | 10 | RelayAutoTurnOffTimer | Auto turn off timer for relay. | 1 | 4 | 0 | 0 | 0x00000000 | 11 | RelayAutoTurnOnTimer | Auto turn on timer for relay. | 1 | 4 | 0 | 0 | 0x00000000 | 17 | Double Tap Behavior | Double Tap behavior. | 1 | 1 | 0 | 0 | 0x00 | 23 | Custom brightness level | Custom brightness level. | 1 | 1 | 0 | 0 | 0x00 | 24 | DimmerReportAndIndicatorBehavior | Disable local control behavior for dimmer. | 1 | 1 | 0 | 0 | 0x00 | 25 | RelayReportAndIndicatorBehavior | Disable local control behavior for relay. | 1 | 1 | 0 | 0 | 0x00 | 31 | Ramp rate for physical off | Rate when turn off by short press the paddle. | 1 | 1 | 0 | 0 | 0x00 |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | SCAN THE QR CODE / ENTER THE 5-DIGIT DSK if using the new SmartStart method. (arrow pointing to the QR code next to text) | 1 | Classic Inclusion | 1. Initiate inclusion (pairing) in the app (or web interface).
2. TAP THE DIMMER UP 3 TIMES QUICKLY if using traditional Z-Wave™ inclusion.
3. The LED indicator will blink blue to signal communication and turn green for 3 seconds if inclusion is successful or turn red for 3 seconds if the pairing attempt fails. | 2 | Classic Exclusion | 1. Bring your Z-Wave™ gateway (hub) close to the switch if possible
2. Put the Z-Wave™ hub into exclusion mode (not sure how to do that? ask@getzooz.com)
3. Tap the lower paddle on the dimmer 3 times quickly (the LED indicator will start blinking blue)
4. Your hub will confirm exclusion, the LED indicator on the switch will turn green for 3 seconds, and the device will disappear from your controller's device list
reset | 5 | Factory Reset Procedure | If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To complete the reset process manually, press and hold the lower paddle on the dimmer for at least 15 seconds
until the LED indicators start flashing, then release. Then immediately press and hold the upper paddle on the dimmer for at least 15 seconds.
The LED indicators will flash again to confirm successful reset. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
Radio Range Z-Wave LR (m) | 400 |
|---|
