Product Recognition
Certification Number	ZC10-15050016
Name	Secure Key Chain Controller
Short Description	The Z-Wave.Me Key Fob is a Z-Wave device that can both control other Z-Wave devices as primary controller and activate scenes as secondary controller.
Long Description	The Secure Key Fob Controller is a 4 button Z-Wave device capable to act both as primary or secondary controller. The four buttons can control other Z-Wave devices such as switches, dimmer and even door locks directly. Various options - configurable by Z-Wave configuration commands - define the actions and the commands used for this control. It is possible to use two sets of buttons (one of on/open/up and one for off/closed/down) or 4 single buttons to control 4 different groups of devices. The controller also allows triggering scenes in a central controller. Again different modes can be configured to adapt to the various implementations of scenes in different central controllers in the market. Control options also include special modes like 'all on/off' or always controlling the Z-Wave device in proximity to the fob. The device supports secure communication when included with enhanced security option and when communicating to a device also supporting enhanced security option. Otherwise the device will automatically turn into normal communication. to maintain backward compatibility.
Brand	Z-Wave.Me
Product Identifier	ZME_KFOBC
OEM Version	1
Hardware Platform	ZM5202
Z-Wave Version	6.51.03
Library Type	CONTROLLER_PORTABLE
Device Type	Remote Control - Simple
Role Type	ROLE_TYPE_CONTROLLER_PORTABLE
Manufacturer ID	0x0115
Product Type ID	0x0100
Product ID	0x0103
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	All Controllers, Handheld Controller
Countries / Regions	European Union
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL Switch Multilevel 0x26 1 COMMAND_CLASS_DOOR_LOCK Door Lock 0x62 1 COMMAND_CLASS_MULTI_COMMAND Multi-Command V1 0x8F 0 COMMAND_CLASS_MULTI_CHANNEL Multi-Channel V1 0x60 0 COMMAND_CLASS_WAKE_UP Wake Up 0x84 1 COMMAND_CLASS_BASIC Basic 0x20 1 COMMAND_CLASS_SECURITY Security S0 0x98 1 COMMAND_CLASS_CENTRAL_SCENE Central Scene 0x5B 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual ZMEEKFOBC_Manualfinal.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 10 0 Z-Wave Plus Lifeline 2 10 0 Control Group A, controlled by button 1 or single clicks of buttons 1 and 3 3 10 0 Control Group B, controlled by button 2 or single clicks of buttons 2 and 4 4 10 0 Control Group C, controlled by button 3 or double clicks of buttons 1 and 3 5 10 0 Control Group D, controlled by button 4 or double clicks of buttons 2 and 4
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 11 Command to Control Group A This parameter defines the command to be sent to devices of control group A when the related button is pressed 0 1 0 0 8 From To Description 8 8 Central Scene to Gateway 0 0 Disabled 1 1 Switch On/Off and Dim (send Basic Set and Switch Multilevel) 2 2 Switch On/Off only (send Basic Set) 3 3 Switch All 4 4 Send Scenes 5 5 Send Preconfigured Scenes 7 7 Control DoorLock 2 Button 2 and 4 pair mode In separate mode button 2 works with control group B, button 4 with control group D. Click is On, Hold is dimming Up, Double click is Off, Click-Hold is dimming Down. In pair button B/D are Up/Down correspondingly. Click is On/Off, Hold is dimming Up/Down. Single clicks works with group B, double click with group D. 0 1 0 0 1 From To Description 2 2 In pair with double clicks 1 1 In pair without double clicks 0 0 seperately 25 Blocks wakeup even when wakeup interval is set 0 1 0 0 1 From To Description 0 0 Wakeup is blocked 1 1 Wakeup is not blocked 1 Button 1 and 3 pair mode In separate mode button 1 works with group A, button 3 with groups C. Click is On, Hold is dimming Up, Double click is Off, Click-Hold is dimming Down. In pair button 1/3 are Up/Down correspondingly. Click is On/Off, Hold is dimming Up/Down. Single clicks works with group A, double click with group C. 0 1 0 0 1 From To Description 0 0 seperately 1 1 In pair without double clicks 2 2 In pair with double clicks
Texts	ID Description Value 24 Controller Exclusion Enter management mode by push all four buttons together for one second - green led blinks slowly), hit button 3 ( enter primary controller functions - green led blinks faster) and then button 3 again. 23 Controller Inclusion When in factory default push Button 3 (secure) or Button 4 (normal) for one second to enter inclusion mode. The inclusion mode is indicated by a blinking green LED. From second device on you need to enter management mode push all four buttons together for one second - green led blinks slowly), hit button 3 ( enter primary controller functions - green led blinks faster) and then button 1 (secure) or button 2 (normal). 4 Device Wake-Up Enter management mode by push all four buttons together for one second - green led blinks slowly), then hit button 2 . 3 Learn Mode (adding another controller) When in factory default push Button 1 (secure) or Button 2 (normal) for one second to enter learn mode. The learn mode is indicated by a blinking LEDs red/green. Learn mode will only activate when device is in factory reset state. 5 Factory Reset Enter management mode by push all four buttons together for one second - green led blinks slowly), then hit button 3 followed by keeping button 4 pushed down for 10 seconds. The first five seconds the green LED still blinks followed by a long red, shot green sequence. Once LEDs go off, reset was executed. Please use this procedure only if the device is secondary controller and the primary controller is missing or otherwise inoperable.
Supports NWI	Yes
Supports Explorer Frames	Yes