Product Recognition
Certification Number	ZC10-14080008
Name	Secure Wall Controller
Short Description	The Z-Wave.Me Wall Controller is a Z-Wave device that can both control other Z-Wave devices and activate scenes.
Long Description	The Z-Wave.Me Wall Controller is a Z-Wave device that can both control other Z-Wave devices and activate scenes. Although it is controlling other devices, the Wall Controller cannot act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The device can be used in different modes that are selected by configuration parameters: Control of groups of other Z-Wave devices using 'ON', 'OFF' and Dim commands. Activation of predefined scenes in Gateways or other Z-Wave devices. This device support secure communication when included by a controller that also supports secure communication.
Brand	Z-Wave.Me
Product Identifier	ZME_WALLC-S
OEM Version	1
Hardware Platform	ZM5202
Z-Wave Version	6.51.01
Library Type	SLAVE_ENHANCED_232
Device Type	Wall Controller
Role Type	ROLE_TYPE_SLAVE_PORTABLE
Manufacturer ID	0x018F
Product Type ID	0x0100
Product ID	0x0101
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	All Lighting Devices, Lighting Accessories
Countries / Regions	European Union
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL Switch Multilevel 0x26 1 COMMAND_CLASS_DOOR_LOCK Door Lock 0x62 1 COMMAND_CLASS_MULTI_COMMAND Multi-Command V1 0x8F 0 COMMAND_CLASS_MULTI_CHANNEL Multi-Channel V1 0x60 0 COMMAND_CLASS_WAKE_UP Wake Up 0x84 1 COMMAND_CLASS_BASIC Basic 0x20 1 COMMAND_CLASS_SECURITY Security S0 0x98 1 COMMAND_CLASS_CENTRAL_SCENE Central Scene 0x5B 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual ZME_WALLC-S-Manual.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 3 10 0 Control Group B, controlled by button 2 or single clicks of buttons 2 and 4 4 10 0 Control Group C, controlled by button 3 or double clicks of buttons 1 and 3 1 10 0 Z-Wave Plus Lifeline 2 10 0 Control Group A, controlled by button 1 or single clicks of buttons 1 and 3 5 10 0 Control Group D, controlled by button 4 or double clicks of buttons 2 and 4
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1 Button 1 and 3 pair mode In separate mode button 1 works with group A, button 3 with groups C. Click is On, Hold is dimming Up, Double click is Off, Click-Hold is dimming Down. In pair button 1/3 are Up/Down correspondingly. Click is On/Off, Hold is dimming Up/Down. Single clicks works with group A, double click with group C. 0 1 0 0 1 From To Description 2 2 In pair with double clicks 0 0 seperately 1 1 In pair without double clicks 25 Blocks wakeup even when wakeup interval is set 0 1 0 0 1 From To Description 0 0 Wakeup is blocked 1 1 Wakeup is not blocked 2 Button 2 and 4 pair mode In separate mode button 2 works with control group B, button 4 with control group D. Click is On, Hold is dimming Up, Double click is Off, Click-Hold is dimming Down. In pair button B/D are Up/Down correspondingly. Click is On/Off, Hold is dimming Up/Down. Single clicks works with group B, double click with group D. 0 1 0 0 1 From To Description 2 2 In pair with double clicks 1 1 In pair without double clicks 0 0 seperately 11 Command to Control Group A This parameter defines the command to be sent to devices of control group A when the related button is pressed 0 1 0 0 8 From To Description 5 5 Send Preconfigured Scenes 7 7 Control DoorLock 8 8 Central Scene to Gateway 0 0 Disabled 1 1 Switch On/Off and Dim (send Basic Set and Switch Multilevel) 2 2 Switch On/Off only (send Basic Set) 3 3 Switch All 4 4 Send Scenes
Texts	ID Description Value 2 Exclusion Re-Inclusion and Exclusion are performed by pushing button 1 in management mode. Pushing all four buttons for 5 sec. turns the device into management mode (indicated by blinking green LED). 4 Device Wake-Up (1) Turn the device into Management Mode by keeping all four buttons pushed for 5 seconds, (2) click on Button 2. 1 Inclusion Place your primary controller in inclusion mode by following the manufacturer's instructions, then activate inclusion on the wall controller by pressing any one of the four buttons for one second. Inclusion mode is indicated by the red/green blinking of the LEDs until the timeout occurs after 10 seconds. 5 Factory Reset Use this procedure only if the primary controller is missing or otherwise inoperable. (1) Turn the device into Management Mode by keeping all four buttons pushed for 5 seconds, (2) click on Button 3, (3) keep button 4 pushed for 4 seconds.
Supports NWI	Yes
Supports Explorer Frames	Yes