Security Camera – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC14-23100346

Name

Security Camera

Short Description

Avigilon's Z-Wave™ enabled security cameras allow for a wireless connection to Z-Wave™ sensors.

Long Description

Avigilon's Z-Wave™ cameras are part of Avigilon's new flagship fixed camera line. The cameras encompass the latest imaging technology and provide a more powerful analytics edge platform. The Z-Wave™ cameras include a built-in microphone and a Z-Wave™ controller. All Z-Wave™ cameras come with infrared illuminators for night vision. The Z-Wave™ cameras allow operators to connect to wireless Z-Wave™ sensors such as door open/close sensors, motion detectors and panic buttons to provide a comprehensive security solution.

Brand

Avigilon

Product Identifier

ACBUSREE

Product Line

Security Cameras

OEM Version

HW: 01 FW: 07.18:07.18

Hardware Platform

ZGM230SA

Z-Wave Version

7.18.1

Library Type

CONTROLLER_BRIDGE

Device Type

Gateway DT

Role Type

ROLE_TYPE_CONTROLLER_CENTRAL_STATIC

Manufacturer ID

0x003F

Product Type ID

0x0001

Product ID

0x0004

User Icon

0x0500

Installer Icon

0x0500

Frequency Plans

EU: 869.85MHz, 868.40MHz

Categories

Gateway Controller, All Controllers, Security Systems

Countries / Regions

European Union

Supported Command Classes

Controlled Command Classes

S2 Classes

S2_ACCESS_CONTROL, S2_AUTHENTICATED, S2_UNAUTHENTICATED

Documents

Features

Association Groups

Texts

ID	Description	Value
23	Controller Classic Inclusion	Add a Z-Wave Device Z-Wave must be enabled to add a device. 1. Click Add Node in the Network Management section. The camera will start scanning for Z-Wave devices. 2. Set your Z-Wave device to be added as a node in your network as described in its User Manual. 3. If your Z-Wave device requires a PIN, you will be asked to enter this PIN and click Submit. The device PIN should be included in its packaging. Tip: Typically the device PIN is the first five digits of your Z-Wave device's DSK. 4. Wait for the adding process to complete. Once it has been added, the device will be listed in the Network Management table. Tip: The Network Management table will display information on all of your connected devices, such as the device's Name, Status, Battery %, and Node ID.
24	Controller Classic Exclusion	Remove a Z-Wave Device This is the recommended way to remove a device from your Z-Wave network. 1. Click Remove Node in the Network Management section. The camera will start scanning for Z-Wave devices. 2. Set your Z-Wave device to be excluded from your network as described in its User Manual. 3. Wait for the removal process to complete. Once it has been removed, the device will be removed from the Network Management table.
11	Controller SmartStart Inclusion	Using SmartStart SmartStart enabled devices can be added to the Z-Wave network so that they are automatically added within 10 minutes of powering the device within the network range. To add devices to SmartStart: 1. Enter the device specific key (DSK) into the field and click Add DSK. The Provisioning List below will be updated with the added DSK. 2. Repeat this step for any other devices you want to add. 3. If you need to remove devices from the Provisioning List, select them and click Remove Selected DSKs. 4. Click Apply to save your settings. 5. Install and power the Z-Wave devices and they will be automatically added to the network within 10 minutes.
25	Controller Provisioning List	Using SmartStart SmartStart enabled devices can be added to the Z-Wave network so that they are automatically added within 10 minutes of powering the device within the network range. To add devices to SmartStart: 1. Enter the device specific key (DSK) into the field and click Add DSK. The Provisioning List below will be updated with the added DSK. 2. Repeat this step for any other devices you want to add. 3. If you need to remove devices from the Provisioning List, select them and click Remove Selected DSKs. 4. Click Apply to save your settings. 5. Install and power the Z-Wave devices and they will be automatically added to the network within 10 minutes.
10	Controller Replication	Copying network information to another control device is executed as part of the inclusion process. This is also referred to as Replication by some Z-Wave devices.
5	Factory Reset Procedure	Reset the Z-Wave Network If this controller is the primary controller for your network, resetting it will result in the nodes of your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network's primary controller is missing or otherwise inoperable. Important: - This process will remove all Z-Wave devices from the camera. - After resetting the network, you will also need to remove each Z-Wave device or reset it to factory defaults before you can add it back to the network. - Use this process only when the camera primary controller is missing or faulty. 1. Click Reset Network in the Network Management section. The process will be triggered immediately. 2. All added Z-Wave devices will be removed from the network and the Network Management section will be empty.

Supports NWI

Yes

Supports Explorer Frames

Yes

Supports SmartStart

Yes