Product Recognition | |
|---|
Certification Number | ZC10-17065638 |
|---|
Name | Siren |
|---|
Short Description | Siren can detect the movement by infrared sensor or can detect the movement along with open sensor.
Alarm will be sounded once movement is detected.
A Z-Wave controller can be used for adjusting sound of alarm, or to turn it on/off, etc. |
|---|
Long Description | Siren will detect the movement of people or animals in real time and then report it to Z-Wave gateway (LTE Router) through the Z-Wave protocol.
It Will be used with AA Battery, Battery life time is 1year.
And it can be installed easily by using double side tape. |
|---|
Brand | LG U+ |
|---|
Product Identifier | SIR-01 |
|---|
OEM Version | HW: 18 FW: 39.36 |
|---|
Hardware Platform | ZM5101 |
|---|
Z-Wave Version | 6.61.00 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | Siren |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_LISTENING |
|---|
Manufacturer ID | 0x022C |
|---|
Product Type ID | 0x004E |
|---|
Product ID | 0x0001 |
|---|
User Icon | 0x0F00 |
|---|
Installer Icon | 0x0F00 |
|---|
Frequency Plans | KR: 920.90MHz, 921.70MHz, 923.10MHz |
|---|
Categories | Sensors, Security Add-Ons |
|---|
Countries / Regions | Republic of Korea |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_SWITCH_BINARY | Switch Binary | 0x25 | 1 | COMMAND_CLASS_BASIC | Basic | 0x20 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_SECURITY | Security S0 | 0x98 | 1 | COMMAND_CLASS_NOTIFICATION_V3 | Notification V3 | 0x71 | 3 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_MANUFACTURER_SPECIFIC | Manufacturer Specific | 0x72 | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2 | Firmware Update Meta-Data V2 | 0x7A | 2 |
|
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_SWITCH_BINARY | Switch Binary | 0x25 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 |
|
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Firmware Updatable | Value |
|---|
Updatable by Professional/Technician |
| Battery Quantity | | Color | | Switch Type | | Battery Type | | IP (Ingress Protection) Rated | | Outdoor Use | | Supported Notification Types | Value |
|---|
Home Security | Emergency Alarm |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 5 | 0 | Lifeline Association Group supporting up to 5 nodes. |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
1 | Alarm function On/OFF | Enables or Disables the alarm function. To enable, use the hex value 0xFF which is -128. | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
0 | 0 | Alarm function off | -128 | -128 | Alarm function on |
| 2 | Alarm Sound level control | - 0x00 : Mute - 0x01 : Level 1 - 0x02 : Level 2 - 0x03 : Level 3 - 0x04 : Level 4 - 0x05 : Level 5 (Max) | 0 | 1 | 0 | 0 | 1 | From | To | Description |
|---|
1 | 5 | The alarm sound is set to level 1 through 5 (Maximum) | 0 | 0 | The alarm sound is muted |
| 3 | Alarm operating time Control | This parameter sets the time that the alarm will operate when it is triggered. | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
0 | 0 | 1 Minute | 1 | 1 | 5 Minutes | 2 | 2 | 10 Minutes | 3 | 3 | 15 Minutes | 4 | 4 | 20 Minutes |
| 4 | Alarm sound preview | This parameter provides a 3 second preview of the alarm sound. Use value -128 or hex value 0xFF. | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
-128 | -128 | Alarm operating (3 sec) |
|
|
|---|
Texts | ID | Description | Value |
|---|
2 | Exclusion | 1. Press the action button for 5 seconds
2. Green LED is turned on after pressing 5 seconds of action button
3. Inclusion will be discontinued once the product is removed from the network
4. If the device is successfully excluded, the Green LED blinks 3 times | 1 | Inclusion | 1. Press & hold action button for 5 seconds when siren is in the excluded status
2. LED of siren will be on 5 seconds later
3. Siren will try inclusion for 1 minute when action button is released
4. LED will blink 3 times with 250ms interval if inclusion is successful | 5 | Factory Reset | 1. Press the action button for 10 seconds
2. The Green LED is turned on after pressing 10 seconds of the action button
3. If the Device is removed (factory reset), the Green LED blinks 5 times
※ Please use this procedure only when the network primary controller is
missing or otherwise inoperable | 4 | Device Wake-Up | The device can be made to wake-up prior to the normal wake-up interval by pressing the action button. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Home Security | (Refer to parameters): State idle | Emergency Alarm | (Refer to parameters): State idle |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Is Flirs | Yes |
|---|
