Product Recognition
Certification Number	ZC10-16010004
Name	Smart Energy In Wall Meter
Short Description	This dual meter module is a transceiver which is a Z-WaveTM enabled device and it is able to detect Instant power wattage of connected light or appliances.
Long Description	This dual meter module is a transceiver which is a Z-WaveTM enabled device and is fully compatible with any Z-WaveTM enabled network. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. And it can act as repeaters within the network regardless of vendor to increase reliability of the network. Mini size design let the module can easily hide itself into the electricity distribution box and that will be good for the house decoration. This dual meter module is able to detect Instant power wattage (13800W/230Vac)(60 Amperes) of connected light or appliances.
Brand	Philio
Product Identifier	PAB01-1
OEM Version	01
Hardware Platform	SD3502
Z-Wave Version	6.51.06
Library Type	SLAVE_ENHANCED_232
Device Type	Whole Home Meter - Simple
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x013C
Product Type ID	0x0006
Product ID	0x001A
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	Energy Meters
Countries / Regions	European Union
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual PAB01 manual-20151110.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 1 0 Z-Wave Plus Lifeline For group 1, the Switch will report ：(1) Instant Power Consumption (Watt) read from CT1， (2) Accumulated Power Consumption (KWh) read from CT1. 2 1 0 For group 2, the Switch will report ：(1) Instant Power Consumption (Watt) read from CT2， (2) Accumulated Power Consumption (KWh) read from CT2. 3 1 0 For group 3, the Switch will report (1) The sum of instant Power Consumption (Watt) read from CT1 and CT2 (2) The sum of accumulated Power Consumption (KWh) read from CT1 and CT2.
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1 Watt Meter Report Period If the setting is configured for 1hour (set value =720), the PAB01 will report its instant power consumption every 1 hour to the node of correspond Group. The maximum interval to report its instant power consumption is 45 hours (5s*32767/3600=45hr). 0 2 0 0 720 From To Description 1 32767 5*720s=3600s=1 hour 2 KWH Meter Report Period If the setting is configured for 1hour (set value =720), the PAB01 will report its Accumulated Power Consumption (KW/h) every 1 hour to the node of correspond Group. The maximum interval to report its Accumulated Power Consumption (KW/h) is 45 hours (5s*32767/3600=45hr). 0 2 0 0 720 From To Description 1 32767 5*720s=3600s=1 hour 3 Selected Endpoint If Controller can't use Multi_Channel command class to access the endpoint of PAB01, you may configure the endpoint value to react the Basic Command Class 、Binary Switch Command Class or Meter Command Class V3. 0 1 0 0 3 From To Description 1 1 1：CT1 2 2 2：CT2 3 3 3：CT1 and CT2 4 Threshold of Current for Load Caution This is a warning when the current of load over the preset threshold value, If the setting value is 6000, when the load wattage of CT1 or CT2 over 60A, PAB01 will send current Meter Report command to the node of correspond Group. 0 2 0 0 6000 From To Description 10 6000 6000*0.01A=60A 5 Threshold of KWh for Load Caution This is a warning when the KWh of load over the preset threshold value, If the setting value is 10000, when the Accumulated Power Consumption of CT1 or CT2 over this value, PAB01 will send KWh Meter Report command to the node of correspond Guoup, minum value is 1KWh and default value is 10000 kWh. 0 2 0 0 10000 From To Description 1 10000 10000*1KWH=10000KWH 6 Existence of Endpoint3 Multi-Channel Command is a good way to control relay1 and relay2 of PAB01 individually. The endpoint3 of PAB01 is related to both relay1 and relay2. In some condition it becomes redundant in Multi-Channel Command Class. When the Existence of Endpoint3 is set as 2, the endpoint3 will be disabled. The default value is 1. Endpoint1 and Endpoint2 are fixed, only Endpoint3 is dynamic. 0 1 0 0 1 From To Description 1 1 1 : Endpoint3 exist 2 2 2 : No Endpoint3
Texts	ID Description Value 1 Inclusion 1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer. 2. Pressing Include button three times within 2 seconds will enter inclusion mode. 2 Exclusion 1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer. 2. Pressing Include button three times within 2 seconds will enter exclusion mode. 3. Node ID has been excluded. 5 Factory Reset Use this procedure only in the event that the primary controller is lost or otherwise inoperable. 1. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode. 2. Within 1 second, press Include button again for 5 seconds. 3. IDs are excluded.
Supports NWI	Yes
Supports Explorer Frames	Yes