Product Recognition
Certification Number	ZC10-16065127
Name	Smart Plug
Short Description	Smart plug is a Z-Wave Switch plugin module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool.
Long Description	Smart plug is a Z-Wave Switch plugin module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool. It can report wattage consumption or kWh energy usage. Smart Plug is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade .
Brand	Hank
Product Identifier	HKZW-SO03
OEM Version	HW: 1 FW: 1.00
Hardware Platform	ZM5101
Z-Wave Version	6.51.08
Library Type	SLAVE_ENHANCED_232
Device Type	On/Off Power Switch
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x0208
Product Type ID	0x0101
Product ID	0x000A
User Icon	0x0700
Installer Icon	0x0700
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	Energy Meters, All Lighting Devices, On/Off Switches/Devices
Countries / Regions	United States of America
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual HKZW-SO03_manual.pdf
Features	Feature Values Firmware Updatable Value Updatable by Consumer by RF Supported Meter Type Value Electric Energy Switch Load Capacity Watts Value 1800W
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Z-Wave Plus Lifeline. Association command class allows Smart Plug to communicate with other Z-Wave devices directly, such as sending BASIC REPORT whenever the smart plug is turn on or off.
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 24 Notification when Load status change Smart Plug can send notifications to association device (Group Lifeline) when state of smart plug’s load change. 0 1 0 0 1 From To Description 0 0 The function is disabled 1 1 Send Basic report 2 2 Send Basic report only when Load condition is not changed by Z-WAVE Command 151 Threshold of change in wattage Power threshold to be interpreted, when the change value of load power exceeds the setting threshold, the smart plug will send meter report to associated device (Group Lifeline). 0 2 0 0 50 From To Description 0 0 The function is disabled. 1 65535 The minimum change value in wattage for sending a meter report to the associated device 152 Threshold of change in wattage percentage Power percentage threshold to be interpreted, when change value of the load power exceeds the setting threshold, the smart plug will send meter report to associated device (Group Lifeline). 0 1 0 0 10 From To Description 0 0 The function is disabled. 1 255 The minimum change value in wattage percent for sending a meter report to the associated device 172 Intervals of sending METER REPORT (for kWh) The interval of sending meter report(in term of kWh) to associated device (Group Lifeline). 0 4 0 0 300 From To Description 0 0 The function is disabled. 5 2678400 The time for sending a meter report 173 Intervals of sending METER REPORT (for voltage). The interval of sending meter report(in term of voltage) to associated device (Group Lifeline). 0 4 0 0 0 From To Description 0 0 The function is disabled 5 2678400 The time for sending a meter report 174 Intervals of sending METER REPORT (for current). The interval of sending meter report(in term of current) to associated device (Group Lifeline). 0 4 0 0 0 From To Description 0 0 The function is disabled. 5 2678400 The time for sending a meter report
Texts	ID Description Value 2 Exclusion 1) Insert the Plug into a socket. 2) Set the Z-Wave network controller into the exclusion mode (see Z-Wave controller operating manual). 3) Triple click the Z button. 4) RGB LED indicator will blink orange till the removing process is completed, than the indicator will keep orange for 3 seconds. 1 Inclusion 1) Connect the power supply. 2) Set the Z-Wave network main controller into inclusion mode (see Z-Wave network controller operating manual). 3) Triple click the Z-button or power up the device , RGB LED indicator should blink fast in blue. 4) Smart Plug should be recognized and included into the Z-Wave network. 5 Factory Reset 1) Insert the Plug into a socket, 2) Press and hold the Z button for more than 20 seconds, 3) If holding time more than 20seconds, the RGB LED indicator will keep yellow for 2 seconds, which means resetting is complete. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
Supported / Controlled Meter Types	Meter Type Rate Type Description Electric meter Import Electric Meter Consumption
Supports NWI	Yes
Supports Explorer Frames	Yes