Product Recognition
Certification Number	ZC10-14080006
Name	Smoke Detector
Short Description	The MT:2651 is a Z-Wave enabled smoke detector.
Long Description	The MT-2651 is a Z-Wave enabled smoke detector which is designed to sense smoke that comes into the detector's chamber and send Z-Wave signal and warning sound (with audibility as 85dB at 3m) if it detects a certain density of smoke. The detector is battery operated and includes the ability to detects the battery level and will report an alert signal if the battery is under certain low level. The sensitivity of its sensor is meet both UL217 and EN14604 standard. The MT:2651 also supports its firmware could updated over Z-WAVE network.
Brand	devolo
Product Identifier	MT:2651
Hardware Platform	ZM5202
Z-Wave Version	6.51.02
Library Type	SLAVE_ENHANCED_232
Device Type	Notification Sensor
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	Sensors
Countries / Regions	European Union
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual Full Manual_Home_Control_Smoke-Detector_0217_en_online.pdf
Features	Feature Values Battery Quantity Value 1 Battery Type Value CR123A Color Value White Firmware Updatable Value Updatable by Professional/Technician
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Z-Wave Plus Lifeline
Texts	ID Description Value 2 Exclusion Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the MT:2651 from your controller. Press the program switch of MT:2651 for 1 second at least to be excluded. The red LED setting light will flash continuously in Exclusion condition. (Please refer to the user manual to understand the program switch location) 1 Inclusion Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the MT:2651 to your controller. To get in the “inclusion” mode, the distance between detector and controller is suggested to be in one meter. Press the program switch of MT:2651 for 1 second at least to be included. After setting, the LED Setting Lighting should go off, if not, please try again. (Please refer to the user manual to understand the program switch location) 4 Device Wake-Up Press program switch once, the detector will send NIF signal first and will also send “Wake Up Notification” after 3 seconds. (Please refer to the user manual to understand the program switch location)
Supports NWI	Yes
Supports Explorer Frames	Yes