Product Recognition | |
|---|
Certification Number | ZC14-22040101 |
|---|
Name | temperature humidity XS SENSOR |
|---|
Short Description | Monitor temperature and humidity indoors or outdoors under eve with this 700 series extra small sensor. |
|---|
Long Description | PRODUCT HIGHLIGHTS:
- Monitor temperature and humidity via Z-Wave™
- NEW 700 series chip for faster communication and more battery life than ever
- Extra small for discreet mounting
- Snap-in mounting bracket available (sold separately)
- Powered by a single coin battery
- The latest S2 security and SmartStart for secure set-up
- Supports OTA firmware updates
PRODUCT SPECS:
- Model Number: ZSE44
- Power: 1 x CR2450 battery
- Operating Temperature: 5°-104° F
- Dimensions: 2.2” x 1.3” x 0.2”
- Range: Up to 130 feet line of sight
- Installation and Use: Indoor or outdoor under eve (can’t be exposed to direct rainfall or sun, a little splash is OK) |
|---|
Brand | Zooz |
|---|
Product Identifier | ZSE44 |
|---|
Product Line | XS Sensors |
|---|
OEM Version | HW: 01 FW: 01.00 |
|---|
Hardware Platform | ZGM130S037HGN2 / ZGM130S037HGN1 |
|---|
Z-Wave Version | 7.16.3 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Notification Sensor DT |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_REPORTING |
|---|
Manufacturer ID | 0x027A |
|---|
Product Type ID | 0x7000 |
|---|
Product ID | 0xE004 |
|---|
User Icon | 0x0CFF |
|---|
Installer Icon | 0x0CFF |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | Sensors |
|---|
Countries / Regions | Canada, Mexico, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_SENSOR_MULTILEVEL_V11 | Multilevel Sensor V11 | 0x31 | 11 |
|
|---|
S2 Classes | S2_AUTHENTICATED, S2_UNAUTHENTICATED |
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Color | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 | 2 | 5 | 0 | Basic Set when temperature high | 0x7104 | 3 | 5 | 0 | Basic Set when temperature low | 0x7104 | 4 | 5 | 0 | Basic Set when humidity high | 0x7110 | 5 | 5 | 0 | Basic Set when humidity low | 0x7110 |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value |
|---|
1 | Battery report threshold | When battery level exceeds threshold, the unit need to report to hub. | 1 | 1 | 0 | 0 | 0x05 | 2 | Low battery alarm report value | Setting the threshold for low battery alarm report. | 1 | 1 | 0 | 0 | 0x0A | 3 | Temperature report threshold | Minimum Temperature change to report. | 1 | 1 | 0 | 0 | 0x0A | 4 | Humidity report threshold | Minimum humidity change to report. | 1 | 1 | 0 | 0 | 0x05 | 5 | Temperature High Alarm Value | Temperature High Watermark value. | 1 | 1 | 0 | 0 | 0x78 | 6 | Temperature High command control | Temperature High Notification and Association Group Control. | 1 | 1 | 0 | 0 | 0x07 | 7 | Temperature Low Alarm Value | Temperature Lower Watermark value. | 1 | 1 | 0 | 0 | 0x0A | 8 | Temperature Low command control | Temperature Low Notification and Association Group Control. | 1 | 1 | 0 | 0 | 0x07 | 9 | Humidity High Alarm Value | Humidity High Watermark value. | 1 | 1 | 0 | 0 | 0x00 | 10 | Humidity High command control | Humidity High Notification and Association Group Control. | 1 | 1 | 0 | 0 | 0x07 | 11 | Humidity Low Alarm Value | Humidity Lower Watermark value. | 1 | 1 | 0 | 0 | 0x00 | 17 | Humidity report interval | When the time since the last humidity report exceeds this value, it will report again. | 1 | 2 | 0 | 0 | 0x00F0 |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | Printed on the inside of the sensor’s battery cover. | 1 | Classic Inclusion | 1. Initiate inclusion on your Z-Wave hub.
2. While the hub is looking for new devices, click the Z-Wave™ button 3 times as quickly as possible.
3. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed. | 2 | Classic Exclusion | 1. Bring the sensor within direct range of your Z-Wave™ hub.
2. Put the Z-Wave™ hub into exclusion mode (not sure how to do that? ask@getzooz.com).
3. Click the Z-Wave™ button 3 times as quickly as possible.
4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list. | 4 | Wake-Up Procedure | The sensor’s wake-up interval is set to 12 hours by default to save battery life. Use the Wake Up Command Class to adjust the interval. Click the Z-Wave™ button 4 times quickly to wake the sensor up manually. The LED indicator will flash once to confirm the device is awake. During wakeup, the sensor turns the Z-Wave™ radio on for one minute to receive communication from the hub. Long wake-up interval will not affect how often the sensor reports to your hub so we recommend leaving the default setting to conserve battery. | 5 | Factory Reset Procedure | When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave™ button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave™ button twice more to finalize the reset.
The LED indicator will flash 3 times to confirm a successful reset.
NOTE: All previously recorded activity and custom settings will be erased from the device’s memory. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Heat Alarm | Heat sensor status: Overheat detected | Heat Alarm | Heat sensor status: Under heat detected | Weather Alarm | Moisture alarm status: Moisture alarm |
|
|---|
Supported Multilevel Sensors | Multilevel Sensor Type |
|---|
Air temperature | Humidity |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
