Product Recognition | |
|---|
Certification Number | ZC14-22040100 |
|---|
Name | TILT | SHOCK XS SENSOR |
|---|
Short Description | Use the Tilt | Shock XS Sensor to monitor your garage doors and other important points of entry in your home. |
|---|
Long Description | PRODUCT HIGHLIGHTS:
- Quick and reliable tilt and vibration alerts to your hub
- NEW 700 series chip for faster communication and more battery life than ever
- Extra small for discreet mounting
- Protective rubber coating
- Powered by a long-lasting single coin battery
- The latest S2 security and SmartStart for secure set-up
- Supports OTA firmware updates
PRODUCT SPECIFICATIONS:
- Model Number: ZSE43
- Power: 1 x CR2032 battery
- Operating Temperature: 5°-104° F
- Dimensions: 1.9” x 1” x 0.3”
- Range: Up to 130 feet line of sight
- Installation and Use: Indoor or outdoor under eve (can’t be exposed to direct rainfall or sun, a little splash is OK) |
|---|
Brand | Zooz |
|---|
Product Identifier | ZSE43 |
|---|
Product Line | XS Sensors |
|---|
OEM Version | HW: 01 FW: 01.00 |
|---|
Hardware Platform | ZGM130S037HGN2 / ZGM130S037HGN1 |
|---|
Z-Wave Version | 7.16.3 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Notification Sensor DT |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_REPORTING |
|---|
Manufacturer ID | 0x027A |
|---|
Product Type ID | 0x7000 |
|---|
Product ID | 0xE003 |
|---|
User Icon | 0x0C00 |
|---|
Installer Icon | 0x0C06 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | Sensors |
|---|
Countries / Regions | Canada, Mexico, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_SENSOR_BINARY_V2 | Binary Sensor V2 | 0x30 | 2 |
|
|---|
S2 Classes | S2_AUTHENTICATED, S2_UNAUTHENTICATED |
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 | 2 | 5 | 0 | Basic Set for contact sensor | 0x7106 | 3 | 5 | 0 | Basic Set for shock sensor | 0x7107 |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value |
|---|
1 | Indicator On Off | LED blinks once door open/close or shock triggered | 1 | 1 | 0 | 0 | 0x03 | 2 | Battery Report Threshold | Battery report threshold % | 1 | 1 | 0 | 0 | 0x05 | 3 | Battery Alarm Report | Battery Alarm Report | 1 | 1 | 0 | 0 | 0x14 | 4 | Level for vibration | Sensitive level setting for vibration alarm arming and disarming. | 1 | 1 | 0 | 0 | 0x00 | 5 | Delay for open | Delay in seconds with ON command report (door open) | 1 | 2 | 0 | 0 | 0x0000 | 6 | Delay for close | Delay in seconds with OFF command report (door closed) | 1 | 2 | 0 | 0 | 0x0000 | 7 | Enable contact or shock sensor | Enable contact or shock sensor | 1 | 1 | 0 | 0 | 0x02 | 8 | Setting for AGI 2 | Select basic on or off command for association group 2. | 1 | 1 | 0 | 0 | 0x03 | 9 | Setting for AGI 3 | Select basic on or off command for association group 3. | 1 | 1 | 0 | 0 | 0x03 | 10 | Report for contact | Select report type(Notification or binary sensor) when contact sensor triggered. | 1 | 1 | 0 | 0 | 0x00 | 11 | Report delay after tamper disarming | Report will be issued after some seconds determined by this parameter. | 1 | 2 | 0 | 0 | 0x0003 |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the inside of the sensor’s battery cover to complete SmartStart inclusion. | 1 | Classic Inclusion | 1. Initiate inclusion on your hub.
2. While the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed. | 2 | Classic Exclusion | 1. Bring the sensor within direct range of your Z-Wave hub.
2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).
3. Click the Z-Wave button 3 times as quickly as possible.
4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list. | 4 | Wake-Up Procedure | Click the Z-Wave button 4 times quickly to wake the sensor up manually. The LED indicator will flash once to confirm the device is awake. During wake-up, the sensor turns the Z-Wave radio on for one minute to receive communication from the hub. | 5 | Factory Reset Procedure | When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave button twice more to finalize the reset. The LED indicator will flash 3 times to confirm a successful reset. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Access Control | Door state: Window/door is open | Access Control | Door state: Window/door is closed | Home Security | Cover status: Tampering, product cover removed |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
