| Product Recognition | |
|---|
| Certification Number | ZC10-16030007 |
|---|
| Name | Touch |
|---|
| Short Description | Oomi Touch is not only a touch device but also a Z-Wave touch sensor, it has built in a Z-Wave module, which let you can easily receive its sensor notifications from anywhere in the world. |
|---|
| Long Description | Oomi Touch is a smart mobility device based on the android OS. It is not only a touch device but also a Z-Wave touch sensor, it has built in a Z-Wave module, which let you can easily receive its sensor notifications form anywhere in the world.
It is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade. |
|---|
| Brand | Oomi |
|---|
| Product Identifier | FT102-A |
|---|
| OEM Version | HW: 66 FW: 1.13 |
|---|
| Hardware Platform | ZM5101 |
|---|
| Z-Wave Version | 6.51.06 |
|---|
| Library Type | SLAVE_ROUTING |
|---|
| Device Type | Notification Sensor |
|---|
| Role Type | ROLE_TYPE_SLAVE_SLEEPING_LISTENING |
|---|
| Manufacturer ID | 0x016A |
|---|
| Product Type ID | 0x0102 |
|---|
| Product ID | 0x0066 |
|---|
| Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
| Categories | Sensors |
|---|
| Countries / Regions | United States of America |
|---|
| Controlled Command Classes | | Identifier | Name | Key | Version |
|---|
| COMMAND_CLASS_BASIC | Basic | 0x20 | 1 |
|
|---|
| Documents | |
|---|
| Association Groups | | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
| 1 | 5 | 0 | Z-Wave Plus Lifeline.
The Notification Report CC or Hail CC can be sent in this association group. |
|
|---|
| Configuration Parameters | | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
| 255 | Reset your Touch | Reset your Touch. | 0 | 4 | 0 | 0 | 0 | | From | To | Description |
|---|
| 1431655765 | 1431655765 | Reset the Touch to factory default settings. | | 0 | 0 | Reset the configuration parameters to default settings. |
| | 80 | Configure which command would be sent when the Sensor is triggered. | To configure which command will be sent when the Sensor is triggered. | 0 | 1 | 0 | 0 | 0 | | From | To | Description |
|---|
| 0 | 0 | Send Notification Report CC. | | 1 | 1 | Send Hail CC. |
|
|
|---|
| Texts | | ID | Description | Value |
|---|
| 1 | Inclusion | Let your primary Controller/gateway into Inclusion mode, then press once the ""Learn"" Button in the app of Touch. | | 2 | Exclusion | Let your primary Controller/gateway into Exclusion mode, then press once the ""Learn"" Button in the app of Touch. | | 5 | Factory Reset | Press the ""Reset"" button in the app of Touch. This procedure only be used when the primary controller is missing or inoperable. | | 6 | Additional Special Features | Support the Over The Air (OTA) feature for the product’s firmware upgrade. |
|
|---|
| Supports NWI | Yes |
|---|
| Supports Explorer Frames | Yes |
|---|
| Is Flirs | Yes |
|---|
