Product Recognition | |
|---|
Certification Number | ZC14-25050522 |
|---|
Name | ULTRALOQ Latch3 Z-Wave Smart Lock |
|---|
Short Description | Control your Ultraloq Smart Lock remotely with a smartphone app via Z-Wave: lock/unlock, share access, and view entry logs. |
|---|
Description | Control Your Ultraloq Smart Lock Anytime, Anywhere: Lock, unlock, share access and see a Log of who’s entered and exactly when they did remotely using smartphone App with Z-Wave. Share code remotely to your family, guests or service people for permanent access, specific dates or periods of time.
Certified Highest Security and Durability: Proven for up to 35 times strength of standard residential locks along with a 7 times longer lifespan.IP65 rated dust and weatherproof external Smart Lock built to withstand heat and cold. DIY Installation: Replace your current deadbolt with just a screwdriver. Backed by Ultraloq, world’s leading smart lock brand with more than 1 million happy American users. Plus lifetime mechanical warranty and 18 months electronic warranty. |
|---|
Brand | ULTRALOQ |
|---|
Identifier | LATCH3-ZWAVE |
|---|
Product Line | ultraloq.com |
|---|
OEM Version | HW: 01 FW: 01.00:03.00 |
|---|
Hardware Platform | EFR32ZG28A |
|---|
Z-Wave Version | 7.23.0 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Lock DT |
|---|
Role Type | ROLE_TYPE_END_NODE_SLEEPING_LISTENING |
|---|
Manufacturer ID | 0x0452 |
|---|
Product Type ID | 0x0004 |
|---|
Product ID | 0x0004 |
|---|
User Icon | 0x0300 |
|---|
Installer Icon | 0x0300 |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | Locks |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_BASIC_V2 | Basic V2 | 0x20 | 2 | COMMAND_CLASS_DOOR_LOCK_V4 | Door Lock V4 | 0x62 | 4 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_USER_CODE | User Code | 0x63 | 1 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_SECURITY | Security 0 | 0x98 | 1 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 |
|
|---|
S2 Classes | S2_ACCESS_CONTROL |
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Communications Protocol | Value |
|---|
Manufacturer's Open/Documented Protocol |
| Door Lock Type | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
| IP (Ingress Protection) Rated | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 |
|
|---|
Texts | ID | Description | Value |
|---|
1 | Classic Inclusion | 4.2 How to add the product into Z-Wave network
1. Follow the user guide of hub to enter inclusion mode.
2. Operate on lock Enter "Include mode": Hold the "0" button for 3 seconds, hear 2 beeps and
flashing blue light, internal LED Flashing Green light. The lock now enters setup mode.
3. Follow the prompts, scan the QR code located on the better cover, or enter the 5-digit PIN
code.
Note: Please complete the preparation within 30 seconds. If you miss, please press the
ULTRALOQ button again to enter. | 5 | Factory Reset Procedure | Please note that all data will be erased if you reset U-Bolt Z-Wave to factory default.
Please use a Reset Needle to push the Reset Button (located inside the battery
compartment) for around 10 seconds until you hear one long beep and two short beeps. | 8 | Where to find S2 DSK on product | 4.1 Z-Wave DSK Location
1. You can find the QR code on the battery cover of your door lock.
2. You may also find the DSK in the user manual of each product.
Note: Please do not remove or damage them. | 2 | Classic Exclusion | 4.3 How to remove the product from the Z-Wave network
1. Follow the user guide of hub to enter exclusion mode.
2. Operate on lock Enter "Exclusion mode": Hold the "0" button for 3 seconds, hear 2 beeps and
flashing blue light, internal LED Flashing Green light.
3. Remove from the hub. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Access Control | Manual lock operation | Access Control | Manual unlock operation | Access Control | RF lock operation | Access Control | RF unlock operation | Access Control | Keypad lock operation | Access Control | Keypad unlock operation | Access Control | Auto lock locked operation | Access Control | Lock state: Lock jammed | Access Control | All user codes deleted | Access Control | Single user code deleted | Access Control | New user code added | Access Control | New user code not added due to duplicate code | Access Control | Keypad state: Keypad temporary disabled | Home Security | Tampering, invalid code |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Is Flirs | Yes |
|---|
Supports SmartStart | Yes |
|---|
