Product Recognition | |
|---|
Certification Number | ZC10-17075690 |
|---|
Name | Window Blind Controller |
|---|
Short Description | Retrofit blind motor to tilts Horizontal 2" and 2.5" slatted-style blinds. |
|---|
Long Description | An intelligent Z-Wave blind motor that installs out of sight in existing Horizontal (2" and 2 1/2" slatted-style) blind headrails. Use iBlinds to tilt the slats open, closed or use the value slider for precise positioning of the slat tilt angle. |
|---|
Brand | iBlinds |
|---|
Product Identifier | IB2.0 |
|---|
OEM Version | HW: 255 FW: 1.65 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.61.00 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | Window Covering - Endpoint Aware |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_LISTENING |
|---|
Manufacturer ID | 0x0287 |
|---|
Product Type ID | 0x0003 |
|---|
Product ID | 0x000D |
|---|
User Icon | 0x1900 |
|---|
Installer Icon | 0x1900 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | Window Covering |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_SWITCH_BINARY_V2 | Switch Binary V2 | 0x25 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_SWITCH_MULTILEVEL_V4 | Switch Multilevel V4 | 0x26 | 4 | COMMAND_CLASS_BASIC_V2 | Basic V2 | 0x20 | 2 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 | Association Group Information V2 | 0x59 | 2 |
|
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Color | | Window Covering Control Features | Value |
|---|
Endpoint Aware | Position Aware | Automatic Calibration | Supports Horizontal Blinds/Louvers | Supports Tilt Motion | Supports Open/Close Motion |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 5 | 0 | Z-Wave Plus Lifeline |
|
|---|
Texts | ID | Description | Value |
|---|
1 | Inclusion | Follow the directions for your Z-Wave hub/controller to place it in the add for inclusion mode.
Press the inclusion button once and wait for the device to be discovered and joined to the Z-Wave network. Follow the directions of your Z-Wave controller to uniquely identify your iblinds device. (Ex: Bedroom iblind)
Note: If the device is not joined to the network. Press the CLBR button Wait 1 minutes and repeat steps 1 and 2 again. If you continue to have trouble joining the iblinds motor to the Z-Wave network follow the Z-Wave network Exclusion process below. | 2 | Exclusion | Follow the directions for your Z-Wave device to place it in the exclusion mode.
Press the exclude button once and wait for the device to be removed from the Z-Wave network. | 5 | Factory Reset | The Device Reset Locally function is used to reset the device to fatory defalut. The reset operation resets protocol data (HomeID, NodeID) as well as all application specific data to factory default values.vice Reset Locally
NOTE: Please only use this function when the primary controller is missing or inoperable!
1. Press the INC / EXC button 3
Press the INC / EXC button 3 times within 5 seconds to enable the device reset function.
2. Wait 30 Seconds Press CLBR button
After device is reset wait 30 seconds and press the CLBR button to reboot the device and make it ready for Z-Wave Inclusion. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Is Flirs | Yes |
|---|
