Product Recognition | |
|---|
Certification Number | ZC10-20016831 |
|---|
Name | Z-Wave Garage Door Controller |
|---|
Short Description | Garage Door Remote Controller |
|---|
Long Description | The ADT GD00Z-8-ADT is the next iteration of the best selling line of Z-Wave controlled remote garage door status indicator and activator, with S2 security and OTA capability. Open or close a sectional garage door remotely through a Z-Wave certified Gateway or Security Panel. Compatible with virtually any garage door opener connected to a sectional garage door. Audible and visual warnings prior to remotely-activated door movement, meeting UL 325 safety requirements. Included tilt sensor reports door "open" or "close" information. |
|---|
Brand | ADT |
|---|
Product Identifier | GD00Z-8-ADT |
|---|
Product Line | GoControl |
|---|
OEM Version | HW: 3 FW: 3.00:03.02 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.71.00 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | Barrier Operator |
|---|
Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
Manufacturer ID | 0x014F |
|---|
Product Type ID | 0x4744 |
|---|
Product ID | 0x3531 |
|---|
User Icon | 0x1E00 |
|---|
Installer Icon | 0x1E00 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | Motor Control |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4 | Firmware Update Meta-Data V4 | 0x7A | 4 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_APPLICATION_STATUS | Application Status | 0x22 | 1 | COMMAND_CLASS_SECURITY | Security S0 | 0x98 | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_BARRIER_OPERATOR | Barrier Operator | 0x66 | 1 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_SECURITY_2 | Security S2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 |
|
|---|
S2 Classes | S2_ACCESS_CONTROL |
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | User Manual | |
|
|---|
Features | Feature | Values |
|---|
Firmware Updatable | Value |
|---|
Updatable by Professional/Technician |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Description |
|---|
1 | 1 | 0 | Lifeline | Z-Wave Plus Lifeline |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | Security 2 DSK label can be found on the bottom side of the product. | 6 | Other Special Features | N/A | 1 | Classic Inclusion | 1. Place your Z-Wave Controller into Include mode.
2. Press and release the link button on the GD00Z-8-ADT. | 2 | Classic Exclusion | 1. Place your Z-Wave Controller into Exclude mode.
2. Press and release the link button on the GD00Z-8-ADT. | 5 | Factory Reset Procedure | Reset the GD00Z-8-ADT by pressing the LINK button 5 times. A quick beep followed by a longer beep will indicate the reset.
Reset should only be used in the case of a missing or inoperative primary controller. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Access Control | (Refer to parameters): State idle | Access Control | Barrier unable to perform requested operation due to UL requirements |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
