Product Recognition | |
|---|
Certification Number | ZC10-17085733 |
|---|
Name | Z-Wave Keypad |
|---|
Short Description | 12 button numerical keypad with extra ring button, can work as primary or as secondary controller |
|---|
Long Description | This keypad is a security enabled Z-Wave Plus product. An security enabled Z-Wave controller must be used to fully utilize this product. The keypad allows securely controlling devices - such as door locks - and trigger actions in a gateway – such as arm/disarm alarm system– based on the entry of certain key codes. Additionally a bell key allows emulating a doorbell by operating e.g. a chimney or a light or both.
The device can operate in two different modes. The mode is chosen the way the device is included into a Z-Wave network:
(a) Stand Alone Mode. In this case the keypad acts as the primary network controller and will include other devices such as e.g. a strike lock control or a chimney. No other central controller is needed. The management of user codes is done using the keypad itself.
(b) Network Mode. The keypad is included as additional device into an exiting network. In Z-Wave terms it will then act as secondary controller. It will send commands to a central controller and is managed by this controller. In this mode the device can still directly control door locks but it can also be used to trigger scenes in a central controller.
The device is protected by a tamper switch sending out an alarm message when the enclosure is opened. |
|---|
Brand | Popp |
|---|
Product Identifier | 700045 |
|---|
OEM Version | HW: 1 FW: 1.06 |
|---|
Hardware Platform | ZM5101 |
|---|
Z-Wave Version | 6.51.10 |
|---|
Library Type | CONTROLLER_PORTABLE |
|---|
Device Type | Notification Sensor |
|---|
Role Type | ROLE_TYPE_CONTROLLER_PORTABLE_REPORTING |
|---|
Manufacturer ID | 0x0154 |
|---|
Product Type ID | 0x0005 |
|---|
Product ID | 0x0002 |
|---|
User Icon | 0x0300 |
|---|
Installer Icon | 0x0300 |
|---|
Frequency Plans | EU: 869.85MHz, 868.40MHz |
|---|
Categories | Locks |
|---|
Countries / Regions | European Union |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_USER_CODE | User Code | 0x63 | 1 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_SECURITY | Security S0 | 0x98 | 1 | COMMAND_CLASS_SENSOR_BINARY_V2 | Sensor Binary V2 | 0x30 | 2 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_NOTIFICATION_V5 | Notification V5 | 0x71 | 5 | COMMAND_CLASS_CENTRAL_SCENE_V3 | Central Scene V3 | 0x5B | 3 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V3 | Firmware Update Meta-Data V3 | 0x7A | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 |
|
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_DOOR_LOCK | Door Lock | 0x62 | 1 | COMMAND_CLASS_BASIC | Basic | 0x20 | 1 |
|
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Z-Wave Scene Type | | Battery Quantity | | Battery Type | | Color | | Outdoor Use | | Supported Notification Types | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 10 | 0 | Z-Wave Plus Lifeline | 2 | 10 | 0 | Door Lock Control | 3 | 10 | 0 | Ring Button Control |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
4 | Ring Button OFF Command | This value is sent into Association Group 3 when the door bell button is released or the timeout has reached. | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
0 | 99 | Basic Set Command Value | 255 | 255 | Basic Set Command Value |
| 5 | Central Scene ID for User Codes | This parameter defines if different user codes shall cause individual or similar scene ID sent to the main controller. | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
0 | 0 | Constant Scene ID 20 for all User Codes | 1 | 1 | Individual User Codes 1 ... 20 |
| 6 | Buzzer Confirmation | This parameter defines if the internal buzzer shall be used to confirm button presses. | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
0 | 0 | Disabled | 1 | 1 | Enabled |
| 1 | Door Lock Automatic Secure Timeout | After this time a CLOSE command is sent to the controlled door lock. On default no CLOSE command is sent assuming that the strike lock has its own timeout set | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
0 | 127 | seconds |
| 2 | Ring Button Press Basic Command OFF Timeout | After this time the Door Bell will receive an OF command regardless of the actuall button is pressed or not | 0 | 1 | 0 | 0 | 3 | From | To | Description |
|---|
0 | 127 | seconds |
| 3 | Ring Button ON Command | This value is sent into Association Group 3 when the door bell button is pressed. | 0 | 1 | 0 | 0 | 255 | From | To | Description |
|---|
0 | 99 | Basic Set Command Value | 255 | 255 | Basic Set Command Value |
|
|
|---|
Texts | ID | Description | Value |
|---|
4 | Device Wake-Up | Hit the RING button | 1 | Inclusion | Turn into Management Mode (remove cover), hit button 1 and confirm with * (Star Key) | 2 | Exclusion | Turn into Management Mode (remove cover), hit button 2 and confirm with * (Star Key) | 3 | Learn Mode (adding another controller) | Turn into Management Mode (remove cover), hit button 4 and confirm with * (Star Key) | 5 | Factory Reset | Turn into Management Mode (remove cover), hit button 5 and keep button * (star key) pushed for 10 seconds. This procedure should only be used when the primary controller is inoperable. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Access Control | (Refer to parameters): State idle |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
