COMMAND_CLASS_CONFIGURATION_V4

Configuration V4

0x70

4

COMMAND_CLASS_SWITCH_BINARY_V2

Switch Binary V2

0x25

2

COMMAND_CLASS_POWERLEVEL

Powerlevel

0x73

1

COMMAND_CLASS_ASSOCIATION_V3

Association V3

0

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V4

Multi-Channel Association V4

0

COMMAND_CLASS_INDICATOR_V3

Indicator V3

0x87

3

COMMAND_CLASS_SENSOR_BINARY_V2

Sensor Binary V2

0x30

2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Transport Service V2

0x55

2

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Device Reset Locally

0x5A

1

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Z-Wave Plus Info V2

0x5E

2

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5

Firmware Update Meta-Data V5

0x7A

5

COMMAND_CLASS_MULTI_CHANNEL_V4

Multi-Channel V4

0x60

4

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association Group Information V3

0x59

3

COMMAND_CLASS_NOTIFICATION_V8

Notification V8

0x71

8

COMMAND_CLASS_BASIC_V2

Basic V2

0x20

2

COMMAND_CLASS_SECURITY_2

Security S2

0x9F

1

COMMAND_CLASS_VERSION_V3

Version V3

0x86

3

COMMAND_CLASS_SUPERVISION

Supervision

0x6C

1

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Manufacturer Specific V2

0x72

2

Manual_Primary_Lang

Product Manual

Firmware Updatable

Switch Type

2

5

0

BASIC SET

Send on/off control

1

1

0

Lifeline

Z-Wave Lifeline

3

5

0

BASIC SET

Send on/off control

10

Input 1 trigerring

Connect input and output or separate the output from the input for switch 1

2

1

0

1

1

Warning: Undefined variable $field_object in /nas/content/live/zwaprodcatalog/wp-content/themes/hello-elementor-child/single-z-wave-product.php on line 98

From	To	Description
1	1	trigger unable (default); trigger the relay and hub notification
0	0	trigger disable (only notification to hub according to set par 2)

6

EP1 Auto Turn-off Timer

Setting auto off timer value for relay one

2

4

0

65535

0

1

Restore state after power failure

Restore state after power failure: always off, always on or follow the status before power failure

2

1

0

4

1

7

EP1 Auto Turn-on Timer

Setting auto on timer value for relay one

2

4

0

65535

0

2

Select switch one's type

Select switch one's type: switch or sensor

2

1

0

9

2

Yes

3

Select switch two's type

Select switch two's type: switch or sensor

2

1

0

9

2

Yes

8

EP2 Auto Turn-off Timer

Setting auto off timer value for relay two

2

4

0

65535

0

11

Input 2 trigerring

Connect input and output or separate the output from the input for switch 2

2

1

0

1

1

9

EP2 Auto Turn-on Timer

Setting auto on timer value for relay two

2

4

0

65535

0

5

LED indicator

Indicator inverse, follow, always on or always off

2

1

0

3

0

24

Sw1,Sw2 setting

DC motor mode: sync R1 and R2 together to prevent them from being activated at the same time

2

1

0

1

0

17

EP2 Auto Turn-Off Timer Unit

Setting auto off timer unit(minutes, seconds or hours) for relay two

2

1

0

2

0

8

Where to find S2 DSK on product

SmartStart enabled products can be added into a Z-Wave network by scanning the Z-Wave™ QR Code found on the top of the outlet or the back ofthe box with a controller providing SmartStart inclusion.No further action is required and the SmartStart product will be added automatically within10 minutes of being switched on and in the network vicinity.QR CODEthe QR code are sticked to the side of the case,DSK is included in the QR code.DSKThe DSK code can be found on the DSK label which is attached on the packaging box.

1

Classic Inclusion

Network Wide Inclusion To A Z-Wave™ Network1,Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.2,When prompted by your primary controller, click the Up or Down button three times in one second.

2

Classic Exclusion

Network Wide Inclusion To A Z-Wave™ Network1,Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.2,When prompted by your primary controller, click the Up or Down button three times in one second.

5

Factory Reset Procedure

press 4x, then LED lit for 4s, within this time press 4x again – LED blinks 3 times then off to FACTORY RESET(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.)

17

Dynamic Capabilities

* After changing the values of the parameter, first exclude the device (without setting the parameters to their default values),wait at least 5 seconds and then re-include the device! While par=4 to 9.

Smoke Alarm

(Refer to parameters): State idle

Smoke Alarm

Sensor status: Smoke detected

CO Alarm

(Refer to parameters): State idle

CO Alarm

Sensor status: Carbon monoxide detected

CO2 Alarm

(Refer to parameters): State idle

CO2 Alarm

Sensor status: Carbon dioxide detected

Heat Alarm

(Refer to parameters): State idle

Heat Alarm

Heat sensor status: Overheat detected

Water Alarm

(Refer to parameters): State idle

Water Alarm

Sensor status: Water leak detected

Access Control

(Refer to parameters): State idle

Access Control

Door state: Window/door is open