Product Recognition
Certification Number	ZC10-16045035
Name	Z-Wave Plus Micro Smart Plug ON/OFF
Short Description	The NodOn Micro Smart Plug is among the world's smallest Z-Wave Smart Plug, offering in addition Power and Energy Metering Capabilities
Long Description	The NodOn Micro Smart Plug can be controlled by any kind of Z-Wave® (or Z-Wave Plus®) gateway or other Z-Wave® controller (standalone mode) such as the NodOn® Soft Remote or Octan Remote. It existed in both standard, Type E (French) or Schuko (German). Its very small design and volume allow easy integration, without obstructing nearby power holes on a power strip. Furthermore, it can perform Power and Energy Metering. The NodOn Smart Plug is based on brand new 500 series Z-Wave® module from Sigma Designs®, and support all the new features of Z-Wave Plus® standard: Longer range (up to 40m), lower power consumption, higher data rate transmission, and many more new features.
Brand	NodOn
Product Identifier	MSP-3-1-X1
OEM Version	HW: 1 FW: 1.00
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ENHANCED_232
Device Type	On/Off Power Switch
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x0165
Product Type ID	0x0001
Product ID	0x0003
User Icon	0x0701
Installer Icon	0x0701
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	Energy Meters, All Lighting Devices, On/Off Switches/Devices
Countries / Regions	European Union
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_APPLICATION_STATUS Application Status 0x22 1 COMMAND_CLASS_BASIC Basic 0x20 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual NodOn-MSP-3-1-xx-UserGuide-160314-EN-interactive.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 3 5 0 Follow Complementary State: When the Micro Smart Plug is switched ON (respectively OFF) using the local button, it will send OFF (respectively ON) command to the associated devices. No command is sent if the Micro Smart Plug is switched ON or OFF wirelessly. 4 5 0 Metering - High Threshold - Set ON/OFF: When the Micro Smart Plug reaches over the high threshold of power defined by the configuration parameter, it will send OFF or ON command to the associateddevices. This group is configurable through the parameter 25 and 27. 5 5 0 Metering - Low Threshold - Set ON/OFF: When the Micro Smart Plug reaches below the low threshold of ower defined by the configuration parameter, it will send OFF or ON command to the associated devices. This group is configurable through the parameters 26 and 27. 6 5 0 Metering – Report: All the meter reports and notifications triggered by Metering parameters will be reported to the devices present in this group. This group is configurable through the parameters 21, 22, 23 and 24. 1 5 0 Z-Wave Plus® Lifeline: This group is generally used to report information of the Micro Smart Plug to the Main Controller of the networ 2 5 0 Follow State: When the Micro Smart Plug is switched ON (respectively OFF) using the local button, it will send ON (respectively OFF) command to the associated devices. No command is sent if the Micro Smart Plug is switched ON or OFF wirelessly. This group is configurable through the parameter 3.
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 5 Alarm 1 Type Configuration This parameter is to set the Alarm 1 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need. 0 2 0 0 0 From To Description 0 65535 To set-up your values please follow this link : www.nodon.fr/support/msp3/alarm 6 Alarm 1 Specifications This parameter is to set the Alarm 1 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need. 0 4 0 0 0 From To Description 0 2097151999 To set-up your values please follow this link : www.nodon.fr/support/msp3/alarm 3 Follow State This parameter allows to enable or disable Group 2 & Group 3. 0 1 0 0 3 From To Description 2 2 Group 2 disable, Group 3 enable 3 3 Group 2 and Group 3 enable 0 0 Group 2 and Group 3 disable 1 1 Group 2 enable, Group 3 disable 4 Always ON This parameter forces the Micro Smart Plug status to be ON. While enable it is not possible to switch OFF the plug (local or wireless). 0 1 0 0 0 From To Description 0 0 Always ON disable 1 1 Always ON enable 1 Default State This parameter defines the status of the Micro Smart Plug after a power outage or after being plugged. 0 1 0 0 2 From To Description 1 1 OFF 0 0 ON 2 2 State before power outage 11 Alarm 4 Type Configuration This parameter is to set the Alarm 4 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need. 0 2 0 0 0 From To Description 0 65535 To set-up your values please follow this link : www.nodon.fr/support/msp3/alarm 8 Alarm 2 Specifications This parameter is to set the Alarm 2 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need. 0 4 0 0 0 From To Description 0 2097151999 To set-up your values please follow this link : www.nodon.fr/support/msp3/alarm 24 Metering Pulse Whatever other metering reports, this parameter will send one power and one energy report to the lifeline every x s (Seconds). 0 2 0 0 3600 From To Description 0 0 Metering Pulse disable 1 65535 Metering Pulse enable and send report every 1 s (to 65535 s) 7 Alarm 2 Type Configuration This parameter is to set the Alarm 2 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need. 0 2 0 0 0 From To Description 0 65535 To set-up your values please follow this link : www.nodon.fr/support/msp3/alarm 9 Alarm 3 Type Configuration This parameter is to set the Alarm 3 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need. 0 2 0 0 0 From To Description 0 65535 To set-up your values please follow this link : www.nodon.fr/support/msp3/alarm 23 Energy Auto-Sending Report This parameter will send a new energy report automatically if the energy value changes of x Wh (Watt-hour) compared to the last report. 0 2 0 0 1000 From To Description 0 0 Energy Auto-Polling Report Disable 1 65535 Energy Auto-Polling Report enable with 1 Wh (to 65535 Wh) diffential 10 Alarm 3 Specifications This parameter is to set the Alarm 3 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need. 0 4 0 0 0 From To Description 0 2097151999 To set-up your values please follow this link : www.nodon.fr/support/msp3/alarm 17 Alarm 7 Type Configuration This parameter is to set the Alarm 7 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need. 0 2 0 0 0 From To Description 0 2097151999 To set-up your values please follow this link : www.nodon.fr/support/msp3/alarm 0 65535 To set-up your values please follow this link : www.nodon.fr/support/msp3/alarm
Texts	ID Description Value 1 Inclusion To include/add to the Z-Wave network, long press during 2 seconds to send several NIF during 30 seconds or a triple press to send a single NIF 2 Exclusion To exclude/remove from the Z-Wave network, long press during 2 seconds to send several NIF during 30 seconds or a triple press to send a single NIF 5 Factory Reset To reset, long press during more than 5 seconds then release. Please use this procedure only when the primary controller is missing or otherwise inoperable. 6 Additional Special Features Power/Energy metering and Alarm priority management (check user guide for full details)
Supports NWI	Yes
Supports Explorer Frames	Yes