Product Recognition | |
|---|
Certification Number | ZC10-19116789 |
|---|
Name | Z-Wave Smart IR Repeater |
|---|
Short Description | The RS-ZWIREX1 supports learning and repeating IR signals.
The RS-ZWIREX1 also has a temperature and humidity sensor. |
|---|
Long Description | The RS-ZWIREX1 is an IR repeater supporting the Z-Wave Plus standard.
The RS-ZWIREX1 supports learning and repeating IR signals.
The RS-ZWIREX1 also has a temperature and humidity sensor.
The RS-ZWIREX1 is a security enabled Z-Wave Plus Product.
This device must be used in conjunction with a Security Enabled Z-Wave Controller in order to fully utilize all implemented functions.
The RS-ZWIREX1 supports the standard security S0 and S2. |
|---|
Brand | RATOC |
|---|
Product Identifier | RS-ZWIREX1 |
|---|
OEM Version | HW: 1 FW: 1.00:01.00 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.81.03 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | IR Repeater |
|---|
Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
Manufacturer ID | 0x040F |
|---|
Product Type ID | 0x0001 |
|---|
Product ID | 0x0001 |
|---|
User Icon | 0x1B03 |
|---|
Installer Icon | 0x1B00 |
|---|
Frequency Plans | JP: 922.50MHz, 923.90MHz, 926.30MHz |
|---|
Categories | Sensors, Infrared Devices |
|---|
Countries / Regions | Japan |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4 | Firmware Update Meta-Data V4 | 0x7A | 4 | COMMAND_CLASS_SENSOR_MULTILEVEL_V5 | Sensor Multilevel V5 | 0x31 | 5 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_SECURITY | Security S0 | 0x98 | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_SECURITY_2 | Security S2 | 0x9F | 1 | COMMAND_CLASS_INDICATOR_V2 | Indicator V2 | 0x87 | 2 | COMMAND_CLASS_MANUFACTURER_SPECIFIC | Manufacturer Specific | 0x72 | 1 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 |
|
|---|
S2 Classes | S2_UNAUTHENTICATED |
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
| Color | | Sensors | Value |
|---|
Air Temperature | Humidity |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 1 | 0 | Z-Wave Plus Lifeline
Supports the following command classes:
• Device Reset Locally: triggered upon reset. |
|
|---|
Texts | ID | Description | Value |
|---|
1 | Inclusion | To add or include the RS-ZWIREX1 into a Z-Wave network using Z-wave Learn mode button
1. Set the controller in inclusion mode
2. Push the Learn mode button once
3. Wait about 15 seconds | 2 | Exclusion | To remove or exclude the RS-ZWIREX1 into a Z-Wave network
1. Set the controller in exclusion mode
2. Push Z-Wave Learn mode button once
3. Wait about 5 seconds. | 5 | Factory Reset Procedure | The RS-ZWIREX1 can be set to factory settings by pushing Z-wave Learn mode button for 5 seconds.
Please use this procedure only when the primary controller is missing or otherwise inoperable. |
|
|---|
Supported Multilevel Sensors | Multilevel Sensor Type |
|---|
Air temperature | Humidity |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
