Product Recognition | |
|---|
Certification Number | ZC14-26090640 |
|---|
Name | Zooz Z-Wave Long Range Tilt | Shock XS Sensor ZSE43 800LR |
|---|
Short Description | Monitor the open / close status of your garage doors and gates with this reliable tilt and shock Z-Wave sensor. |
|---|
Description | PRODUCT FEATURES:
- Quick and reliable tilt and vibration alerts to your hub
- NEW 800 series chip for faster communication and more battery life than ever
- Extra small for discreet mounting
- Protective rubber coating
- Z-Wave Long Range for ultra reliable no-mesh communication
- The latest S2 security and SmartStart for secure set-up
- Supports OTA firmware updates
PRODUCT SPECS:
- Model Number: ZSE43 800LR
- Power: 1 x CR2450 battery
- Operating Temperature: 5°-104° F
- Dimensions: 2.2” x 1.3” x 0.4”
- Range: Up to 150 feet (up to 1300 FT with ZWLR) line of sight
- Installation and Use: Indoor only |
|---|
Brand | Zooz |
|---|
Brand Owner | Zooz |
|---|
Identifier | ZSE43 800LR |
|---|
Product Line | Security |
|---|
Product URL | https://www.thesmartesthouse.com/products/zooz-z-wave-plus-700-series-xs-tilt-shock-sensor-zse43 |
|---|
OEM Version | HW: 03 FW: 03.00 |
|---|
Hardware Platform | EFR32ZG23A |
|---|
Z-Wave Version | 7.24.1 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Notification Sensor DT |
|---|
Role Type | ROLE_TYPE_END_NODE_SLEEPING_REPORTING |
|---|
Manufacturer ID | 0x027A |
|---|
Product Type ID | 0x7000 |
|---|
Product ID | 0xE003 |
|---|
User Icon | 0x0C06 |
|---|
Installer Icon | 0x0C06 |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
Radio Range Z-Wave LR (m) | 400 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz, US_LR: 912.00MHz, 920.00MHz |
|---|
Categories | Sensors |
|---|
Countries / Regions | Canada, Mexico, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 |
|
|---|
S2 Classes | S2_AUTHENTICATED, S2_UNAUTHENTICATED |
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 | 2 | 5 | 0 | Basic Set for contact sensor | 0x7106 | 3 | 5 | 0 | Basic Set for shock sensor | 0x7107 |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value |
|---|
1 | LED Indicator | Decide if you want the LED indicator to blink when open/close tilt and/or vibration status changes. | 1 | 1 | 0 | 0 | 0x03 | 2 | Battery Reporting Threshold | Set the threshold for battery reporting in % changes. | 1 | 1 | 0 | 0 | 0x05 | 3 | Low Battery Report | Which % level should the device report low battery to the hub. | 1 | 1 | 0 | 0 | 0x14 | 4 | Vibration Sensor Sensitivity | Set the vibration sensor's level of sensitivity (0 - high, 1 - medium, 2 - low) | 1 | 1 | 0 | 0 | 0x01 | 5 | ON Basic Set Reporting Delay to Group 2 | Set the delay for the ON basic set command to be sent to the devices associated in Group 2 after the door is open. | 1 | 2 | 0 | 0 | 0x0000 | 6 | OFF Basic Set Reporting Delay to Group 2 | Set the delay for the OFF basic set command to be sent to the devices associated in Group 2 after the door is closed. | 1 | 2 | 0 | 0 | 0x0000 | 7 | Disable Tilt or Vibration Sensor | Decide if you'd like to disable the vibration (0) or tilt sensor (1) or keep both enabled (2). | 1 | 1 | 0 | 0 | 0x02 | 8 | Tilt Sensor Basic Set Commands | Decide what type of Basic Set commands are sent to devices in Group 2 when tilt sensor is triggered (expert users only). | 1 | 1 | 0 | 0 | 0x03 | 9 | Vibration Sensor Basic Set Commands | Decide what type of Basic Set commands are sent to devices in Group 3 when vibration sensor is triggered (expert users only). | 1 | 1 | 0 | 0 | 0x03 | 10 | Vibration Clear Delay | The amount of time the device waits to send a vibration clear notification after the last vibration event is detected. | 1 | 2 | 0 | 0 | 0x0003 | 11 | Tilt Open / Close Orientation | Decide whether the tilt sensor reports closed (0) or open (1) in the default position (not tilted). | 1 | 1 | 0 | 0 | 0x00 | 17 | Tilt Sensor Direction | Choose which tilt direction the sensor should report to the hub (see documentation for details, expert users only). | 1 | 1 | 0 | 0 | 0x00 |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | SmartStart: use the hub UI / app to scan the SmartStart code located on the inside of the sensor’s battery cover. | 1 | Classic Inclusion | Initiate inclusion (pairing) in the app or hub UI. Make sure the device is powered and finalize the inclusion at the sensor: tap the Z-Wave® button on the device 3 times quickly, the LED will start blinking blue and turn green once the sensor is added. | 2 | Classic Exclusion | 1. Bring the sensor within direct range of your Z-Wave® hub.
2. Put the Z-Wave® hub into exclusion mode.
3. Click the Z-Wave® button 3 times as quickly as possible, the LED will start blinking blue.
4. Your hub will confirm exclusion and the LED indicator will blink green if the process is successful. | 4 | Wake-Up Procedure | The sensor’s wake-up interval is set to 12 hours by default to save battery life. Use the Wake Up Command Class to adjust the interval. Click the Z-Wave® button 4 times quickly to wake the sensor up manually. The LED indicator will blink blue for a second to confirm the device is awake. During wake-up, the sensor turns the Z-Wave® radio on for one minute to receive communication from the hub. Long wake-up interval will not affect how often the
sensor reports to your hub so we recommend leaving the default setting to conserve battery. | 5 | Factory Reset Procedure | When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave® button twice and hold it the third time for 10 seconds. The LED indicator will blink blue continuously. Once the LED turns solid blue, click the Z-Wave® button twice more to finalize the reset. The LED indicator will flash blue 3 times to confirm the reset. NOTE: All previously recorded activity and custom settings will be erased from the device’s memory. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Access Control | Door state: Window/door is open | Access Control | Door state: Window/door is closed | Home Security | Cover status: Tampering, product cover removed |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
